{
    "reference": [
        {
            "keyword": "P3",
            "context": " duplexes as an allowable building type in P2 and P3. Submitted by: Sylvia Carrillo-Trevino, ICMA-CM, "
        },
        {
            "keyword": "P3",
            "context": "lock (B3) Code, Build-to-Line standards in P2 and P3, and adopting a First Layer Setback in P2 and P3."
        },
        {
            "keyword": "P3",
            "context": " P3, and adopting a First Layer Setback in P2 and P3. Submitted by: Sylvia Carrillo-Trevino, ICMA-CM, "
        },
        {
            "keyword": "P3",
            "context": "ding Block (B3) Code, Minimum Lot Sizes in P2 and P3. Submitted by: Sylvia Carrillo-Trevino, CM, ICMA-"
        },
        {
            "keyword": "P3",
            "context": "n Article 3.3: P1- Nature Varies P2- Rural Varies P3 - Neighborhood 10-35% P4 - Mix 25-75% P5 - Core 5"
        },
        {
            "keyword": "P3",
            "context": " property served by alleys or the rear lanes. (g) P3 shall be limited to 10% of the Development. (h) P"
        },
        {
            "keyword": "P3",
            "context": " duplexes as an allowable building type in P2 and P3. AGENDA ITEM SUBMITTED BY: Submitted by: Sylvia C"
        },
        {
            "keyword": "P3",
            "context": " ability for duplexes to be constructed in P2 and P3, which are the more traditional single-family nei"
        },
        {
            "keyword": "P3",
            "context": "ncil Meeting. Zoning Map depicting P2 (Rural) and P3 (Neighborhood) locations that would be affected b"
        },
        {
            "keyword": "P3",
            "context": " require a Conditional Use Permit for duplexes in P3 with a unanimous vote. CITY COUNCIL: The proposed"
        },
        {
            "keyword": "P3",
            "context": "uplexes also be removed as an allowable form from P3, and to remove the option for a Conditional Use P"
        },
        {
            "keyword": "P3",
            "context": "for a Conditional Use Permit to allow duplexes in P3 with a unanimous vote. RECOMMENDATION: Take actio"
        },
        {
            "keyword": "P3",
            "context": " duplexes as an allowable building type in P2 and P3. ATTACHMENTS: 1. Ordinance No. 2025-26 2. Exhibit"
        },
        {
            "keyword": "P3",
            "context": " DUPLEXES AS AN ALLOWABLE BUILDING TYPE IN P2 AND P3; AS ATTACHED IN EXHIBIT A; AND PROVIDING FOR FIND"
        },
        {
            "keyword": "P3",
            "context": "plexes as an allowable building type in P2 and in P3 in order to better facilitate the management of f"
        },
        {
            "keyword": "P3",
            "context": "Attorney 83 Item 9D. INTRODUCTION 18 of 249 P1 P2 P3 P4 P5 EC COURT NP NP P P P P CLOSE NP NP P P P P "
        },
        {
            "keyword": "P3",
            "context": "001 PERMITTED BUILDING TYPES PER PLACE TYPE P1 P2 P3 P4 P5 A: REARYARD COMMERCIAL BUILDING APARTMENT B"
        },
        {
            "keyword": "P3",
            "context": "lock (B3) Code, Build-to-Line standards in P2 and P3, and adopting a First Layer Setback in P2 and P3."
        },
        {
            "keyword": "P3",
            "context": " P3, and adopting a First Layer Setback in P2 and P3. AGENDA ITEM SUBMITTED BY: Submitted by: Sylvia C"
        },
        {
            "keyword": "P3",
            "context": "nce, in a traditional Single-family Neighborhood (P3), such as this one bounded by Buttonwood, Main, C"
        },
        {
            "keyword": "P3",
            "context": "e image above, the current metric of 10\u2019 \u2013 25\u2019 in P3 does not mirror the built environment of many of "
        },
        {
            "keyword": "P3",
            "context": "to establish that the Build-to-Line in the P2 and P3 Place Types be 25 feet on undeveloped lots, and w"
        },
        {
            "keyword": "P3",
            "context": "ncil Meeting. Zoning Map depicting P2 (Rural) and P3 (Neighborhood) locations that would be affected b"
        },
        {
            "keyword": "P3",
            "context": "llowing modifications; undeveloped lots in P2 and P3 shall have a minimum of a 25-foot Build-to-Line, "
        },
        {
            "keyword": "P3",
            "context": "lock (B3) Code, Build-to-Line standards in P2 and P3, and adopting a First Layer Setback in P2 and P3."
        },
        {
            "keyword": "P3",
            "context": " P3, and adopting a First Layer Setback in P2 and P3. ATTACHMENTS: 1. Ordinance No. 2025-22 2. Exhibit"
        },
        {
            "keyword": "P3",
            "context": "LOCK (B3) CODE, BUILD-TO-LINE STANDARDS IN P2 AND P3, AND ADOPTING A FIRST LAYER SETBACK IN P2 AND P3;"
        },
        {
            "keyword": "P3",
            "context": " P3, AND ADOPTING A FIRST LAYER SETBACK IN P2 AND P3; AS ATTACHED IN EXHIBIT A; AND PROVIDING FOR FIND"
        },
        {
            "keyword": "P3",
            "context": "and establish a First Layer Setback in the P2 and P3 Place Types in order to better facilitate the man"
        },
        {
            "keyword": "P3",
            "context": "Attorney 91 Item 9E. INTRODUCTION 19 of 249 P1 P2 P3 P4 P5 EC PORCH NP P P P NP NP DOORYARD NP NP NP P"
        },
        {
            "keyword": "P3",
            "context": "t** * Only applicable to undeveloped lots in P2 & P3, an undeveloped lot shall mean a lot that is raw "
        },
        {
            "keyword": "P3",
            "context": ", also known as the First Layer Setback in P2 and P3, is the area of land between the Frontage Line an"
        },
        {
            "keyword": "P3",
            "context": " the Facade of the Principal Building, for P2 and P3 see B3 Development Table for Standards, Lot Occup"
        },
        {
            "keyword": "P3",
            "context": "ILDING STANDARDS PER PLACE TYPE Place Types P1 P2 P3 P4 P5 A. LOT OCCUPATION Lot Coverage Facade Build"
        },
        {
            "keyword": "P3",
            "context": " ft * Only applicable to undeveloped lots in P2 & P3, an undeveloped lot shall mean a lot that is raw "
        },
        {
            "keyword": "P3",
            "context": "ding Block (B3) Code, Minimum Lot Sizes in P2 and P3. AGENDA ITEM SUBMITTED BY: Submitted by: Sylvia C"
        },
        {
            "keyword": "P3",
            "context": "is to establish a minimum lot size for the P2 and P3 Place Types, which are the more traditional singl"
        },
        {
            "keyword": "P3",
            "context": "ven by the current average lot size of all P2 and P3 lots within the City of Bastrop. To put it more s"
        },
        {
            "keyword": "P3",
            "context": "he City of Bastrop. To put it more simply, P2 and P3 should look no different that what is currently i"
        },
        {
            "keyword": "P3",
            "context": "mation System (GIS) analysis of all of the P2 and P3 lots within the city. The analysis of the average"
        },
        {
            "keyword": "P3",
            "context": "6 acres. The analysis of the average lot size for P3 was found to be 0.30 acres. Staff is recommending"
        },
        {
            "keyword": "P3",
            "context": "taff is recommending that the minimum lot size in P3 be 0.33 acres to have a more consistent metric of"
        },
        {
            "keyword": "P3",
            "context": "le 80% of data) For instance, in this traditional P3 single-family neighborhood, such as this one boun"
        },
        {
            "keyword": "P3",
            "context": "ed neighborhoods. These changes affect all P2 and P3 zones, however, if a new residential development "
        },
        {
            "keyword": "P3",
            "context": " proposing the minimum lot size of 0.33 acres for P3 and a minimum lot size of 1 acre for P2, Staff is"
        },
        {
            "keyword": "P3",
            "context": "onconforming. Zoning Map depicting P2 (Rural) and P3 (Neighborhood) locations that would be affected b"
        },
        {
            "keyword": "P3",
            "context": "ding Block (B3) Code, Minimum Lot Sizes in P2 and P3. ATTACHMENTS: 1. Ordinance No. 2025-21 2. Exhibit"
        },
        {
            "keyword": "P3",
            "context": "DING BLOCK (B3) CODE, MINIMUM LOT SIZES IN P2 AND P3; AS ATTACHED IN EXHIBIT A; AND PROVIDING FOR FIND"
        },
        {
            "keyword": "P3",
            "context": "ks to establish a minimum lot size for the P2 and P3 Place Types in order to better facilitate the man"
        },
        {
            "keyword": "P3",
            "context": "ttorney 102 Item 9F. INTRODUCTION 19 of 249 P1 P2 P3 P4 P5 EC PORCH NP P P P NP NP DOORYARD NP NP NP P"
        },
        {
            "keyword": "P3",
            "context": "t** * Only applicable to undeveloped lots in P2 & P3, an undeveloped lot shall mean a lot that is raw "
        },
        {
            "keyword": "P3",
            "context": "ILDING STANDARDS PER PLACE TYPE Place Types P1 P2 P3 P4 P5 A. LOT OCCUPATION Lot Coverage Facade Build"
        },
        {
            "keyword": "P3",
            "context": " ft * Only applicable to undeveloped lots in P2 & P3, an undeveloped lot shall mean a lot that is raw "
        },
        {
            "keyword": "P3",
            "context": "(as defined in the Bastrop Code of Ethics) have a P3 development/subdivision matter pending matter bef"
        },
        {
            "keyword": "P3",
            "context": "ir matter may never come before City Council. The P3 development/subdivision items being contemplated "
        },
        {
            "keyword": "P3",
            "context": "ng and recusing myself from all matters regarding P3 development/subdivision. This disclosure includes"
        },
        {
            "keyword": "P3",
            "context": "ding Block (B3) Code, Minimum Lot Sizes in P2 and P3; and move to include on the March 11, 2025 Consen"
        },
        {
            "keyword": "P3",
            "context": "lock (B3) Code, Build-to-Line standards in P2 and P3, and adopting a First Layer Setback in P2 and P3;"
        },
        {
            "keyword": "P3",
            "context": " P3, and adopting a First Layer Setback in P2 and P3; and move to include on the March 11, 2025 Consen"
        },
        {
            "keyword": "P3",
            "context": "a Conditional Use Permit to construct duplexes in P3; and move to include on the March 11, 2025 Consen"
        },
        {
            "keyword": "P3",
            "context": " duplexes as an allowable building type in P2 and P3 and move to include on the March 11, 2025, Consen"
        }
    ]
}