W / S 1 MA CHYKE MAURICE & ASSOCIATES, INC. Architecture, Planning, & Technology Management Cannery Way (CW), Harriet Tubman Pavilion (HTP) and North Star Station Projects Cutsheets/Samples March 19, 2025 1.0 Cannery Way Cutsheets: 1.1 Brick Samples 1.1.1 Whitacre Brick Panel 1.1.2 Unilock Town Hall Paver 1.1.3 Glen Gery Empire Blue Paver 1.2 Replacement Wall Type: 1.2.1 Split Face Concrete Block 1.2.2 Flat Face Concrete Block 1.2.3 Brick 1.3 Native Replacement and New Trees (TBD by Barbara Paca - Landscape Architect) 1.4 Light Poles 1.4.1 Continue using existing 1.4.2 Double Light Fixture 1.4.3 Single Light Fixture 1.5 Park Bench (Optional) 1.6 Trash Cans (Optional) 1.7 Bollards (Optional) 2.0 Harriet Tubman Pavilion: 2.1 Paving: Unilock Richcliff, Dawn Mist, 3 Unit Random Bundle - Drive Friendly 2.2 Solar Canopy Structure: Galvanized Steel or Anodized Aluminum 2.3 Solar System: 4'x8',L Type, 72 Cell, 89Transparency, 430W, Vision Module System with vision mounting rails, inverters, etc. 2.4 Fascia, Guttering, downspouts as manufactured by PAC CLAD. 2.5 1,100 Rainflo 1,100 Gallon Above Ground Complete Rainwater Collection System 2.6 Optional: In Ground Well Light System 3.0 North Star Station: 3.1 Split Face Concrete Block Veneer with light gauge steel stud wall and roof system 3.2 Alternative Veneer/Interior Ceiling: Mataverde Thermally Modified Wood Siding (Hem FR). 3.3 Sliding Entrance Door: Stanley 3.4 Double Entrance Door: Kawneer 3.5 Windows: Kawneer 8400 TL 3.6 Exterior Bathroom Door: 3.7 Fascia, Guttering, downspouts as manufactured by PAC CLAD. P.0. Box 1456 Tel: 410-742-3996 902 W. Main Street Cell: 410-603-1463 Salisbury, MD. 21802-1456 E-Mail: Cma90@hotmail.com 2 3.8 Roof: Berridge Standing Seam Roof 3.9 Soffits: Berridge Standing Seam soffit panels 3.10 Rainflo 1,100 Gallon Above Ground Complete Rainwater Collection System Respectfully Submitted, wzbre Maurice Ngwaba, Ph.D., AIA Chyke Maurice & Assoc. Inc. CC: Adrian Holmes, President AGCDC Jermaine Anderson, AGCDC P.0. Box 1456 Tel: 410-742-3996 902 W. Main Street Cell: 410-603-1463 Salisbury, MD. 21802-1456 E-Mail: Cma90@hotmail.com - a - J 4 a 0 HALL UNILOCK TOWN DESIGNED TO CONNECT TOWN HALL CLIFF 2 ELEGANCE A now standard for CCLOR everlasting beauty. ard Historical, brick pavers cast from real stones using Reala Surface Technology Unsurpasseds strength with Ultima Concrete Tech chnology mN : - - seti traditional installations JCARA AULTI-FACE LLSYS with ENDURAC D LOR An exceptionally strongsto with color that endures Fascia panels are available smooth nd pitched ascia panels can be placed along the Sure Track Backer lin wina nr inlimit en and exture combin aly from Unilock TRANSFERA LIFETIN GUARANT UNIL OCK.C 1-800-UNILO a a I 7 1 - 3 9 - I 9 1 I - - - - 3 - I - * 2 ? C Z a à I : - I - - - E I - I ? T a - I - I 9 00 E 3 I 7 9 lB NITTERHOUSE MASONRY PRODUCTS SPECIFICATIONS FOR: SPLIT FACE ARCHITECTURAL BLOCK Part I- General PRODUCTNAME FLASHING OF MASONRY WORK Architectural Split Face CMU's Install flashing at locations shown in the plans and in strict Architectural Split Face -Wide Profile CMU's accordance with the details and the proper masonry flashing practices Architectural Split Face - Fluted CMU's as outlined in the CONCRETE MASONRY HANDBOOK published by thel Portland Cement Association. SUBMITTAL WEEP HOLES AND VENTS Submit color samples for selection from manufacturer's Color Install weep holes and vents at proper intervals (according to typical Selection Kit. Submit product literature, certifications, and test practice) at courses above grade, above flashing, and at any water reports, full sizes sample(s) of each color specified. stops over windows, doors, and beams. OUALITY, ASSURANCE PROJECT/S SITE CONDITIONS Certifications: All load-bearing CMU comply with. ASTM C90. All Protection of Work: Cover walls each day after installation to keep non-load-bearing units comply with C129. All aggregates conform to open walls protected and dry. After units are installed, they should be ASTM C33. All sampling and testing shall be according to ASTM protected from damage by other trades performing operations that C140. can stain or otherwise damage the finished surfaces by covering walls Fire Resistance- Fire rated for up to 4 hours. See hourly ratings with plastic. required by NCMA TEK: Notes, available at www.niterhouse.com. Field Constructed Mock-ups: Construct a sample panel, no less INSPECTION than 4' X4 4' of units of each color and sizet to be used in the project. The faces ofall concrete masonry products shall be free from chips, Delivery. Storage & Handling: All CMU shall be delivered to the cracks, crazes or any other imperfections that would detract from the jobsite on stretch-wrapped wooden pallets. Cover with waterproof overall appearance ofthe finished wall when viewed from a distance covering (e.g. tarpaulins) to protect the blocks from inclement oftwenty (20) feet at right angles toi the wall with normal lighting, as weather. Handle blocks carefully to avoid breakage and damage to per ASTM C90 or ASTM C129. the finished surfaces. Protective foam shall be used to protect the faces. Store pallets in single stacks on level ground. CLEANING Keep walls clean during installation using brushes. Do not allow Part II Products excess mortar or smears to harden on the finished surface. Harsh FINISHES cleaning methods after walls have been erected may mar the surface Specify exact type of finish required: (Split Face, Split Wide ofthe blocks. Clean masonry units within 7 to 14 days ofl laying the Profile, Split Fluted) wall. Failure to do this could result in harsh methods needed to remove mortar and debris; thus, resulting in damaging the finish of SIZES AND SHAPES the product. Specify exact: sizes and shapes required. Also specify if finished ends, scores, and chamfers are required. FINALCLEANDOWN Standard finish dimensions 75/8" X 15: 5/8" typical The recommended clean down would be to use clear water and a Bed depths sizes nominal 4",6 6",8", 10", & 12". brush. Ifadditional cleaning is required, the use of a detergent masonry cleanser formulated for concrete masonry may be used, strictly following the manufacturer's instructions including thorough INTERGAL WATER REPELLANT pre-wetting ofthe walls and thorough rinsing. Do not use acid or All Architectural CMU's are produced with SIKA AE-3 integral abrasives on the finished surfaces. Failure to strictly follow water repellant. SIKA W-101 M mortar admixture must be added to manufacturer's instruction can result in permanent damage to the the mortar by the mason at a rate of 1 qt. bottle per 2 bags ofi mortar. finished faces. High-pressure power washing is not recommended. Mortar admix must be purchased from block manufacturer for warranty to apply. MAINTENANCE Nitterhouse Architectural Concrete Masonry Units, properly installed Part III - Execution and cleaned, need very little, if any future maintenance. Graffiti, LAYINGMASONRY WALLS paint, or stains might require the use of special cleaning agents. Lay units using the best concrete masonry practices. Install only Contact Nitterhouse for specific cleaning recommendations. quality units; reject any defective units. Units should include uniform 3/8" wide joints on the completed side of the wall. Draw blocks from 4 different pallets at a time during installation to maintain a more uniform wall color. Refer to NCMA TEK 3-1A for Hot and Cold MANUFACTURER QUALIFICATIONS weather construction practices. As manufactured by Nitterhouse Masonry Products, LLC INSTALLATION 859 Cleveland Ave. Chambersburg, PA 17201 Mortar] Bed and. Jointing: Phone: 717-267-4500 1.1 Lay units with full mortar coverage on head and bed joints. email: masonygntemouse.com 2. Tool all mortar joints when thumbprint hard into a concave wwentemolsenasonycon configuration. 3. Care should be taken to remove: mortar: from the face of masonry units before it sets. 4. Tuck point the of scored units for NITTERHOUSE joints proper appearance. Cutting:Make all unit cuts with motor-driven masonry saws, using either ana abrasive or diamond blade. Cut neatly and locate for best appearance MASONRY PRODUCTS, LLC MGWA2 MUNICIPAL-GRADE WASHINGTON DECORATIVE LIGHT POLE KIT, TWO LIGHTS Job: EnergyLight, Inc Job! Site: State: Client Name: Notes:. Approvals: Date: Light Pole Pole Shaft: 5 inch round straight fluted aluminum with 0.188" wall thickness. 16.5" Seamlessly extruded from 6063-T6 tube Aluminum. Alloy per the requirements of ASTM B221. Pole Height: Height above grade pole is 14 ft. Structural Base: Cast. Aluminum. Alloy 356. Color: Black. Commercial, grade, super durable powder coat finish. Anchor Bolts: A: set of 4 galvanized steel anchor bolts is provided with 44" each pole assembly. Each anchor bolt includes 1 Hex Nut, 1 Lock Washer MT VV and 1 Flat Washer. Pole weight: 86 Ibs Warranty:! 5 Years. Foundation design: Foundation should be designed by an engineer familiar with 7" local soil and wind conditions as well as local code where the pole(s) will be 39 installed. Acorn Fixture Weatherproof Standard LED Acorn Light Fixture: Textured clear polycarbonate acorn lens is Outlet Box attached to the cast aluminum base with 4: set screws. with cover Cast aluminum base slips over top of the pole andi is secured with 3: set screws. Pole Top LED Light (each) Selectable Lumens LEDI Power (Watt) DLG U 27 4,185 ED WET PREMIUMT LOCATION 36 5,580 45 6,975 14' Voltage: 120-277V Lumens/Watt: 155 CRI: >80 Power Factor: >0.9 Life Expectancy: >50,000 hours Selectable Color Temperature: 3000K; 4000K; 5000K Dimmable: 0-10V dimming Photocell is optional DLC Listed: Yes Warranty: 5 Years 017" 18" 2" Bolt Projection - Anchor Bolt" Removable 3/4"x 30"x3" Handhole Structural Base Cover 09.0 BC MIN Disclaimer:. All dimensions and specifications are: subject to change without any notice. Energy kez Zrich Light, Ina. Energy Light, Inc. is not responsible for any claims arising from improper loading 012.62 BC what is attached to the light pole), improper use, incorrect foundation design and/or MAX installation. Copyright 0 2024 Energy Light, Inc. All Rights Reserved 1881 Rose Road, Lake Zurich, IL 60047 PKDECO5 Stratford Direct Burial Decorative LED Pole Kit with Standard Acorn Fixture, 4 Inch Diameter Job: Energy! Light,Inc Job! Site: State: Client Name: Notes:. Approvals: Date: LIGHT POLE Pole Shaft: 41 inch round: straight aluminum with 0.125" wall thickness. Seamlessly extruded from 6063-T6 alloy. Pole Height: Standard above grade pole height is 16 ft. Optional heights are 14, 12, 10 and 81 ft. Custom heights are also available. - 16.5" Handhole: 2-1/2") X4" size handhole is located at 18 inches from the base. An aluminum! handhole cover with: 2 screws is provided. A ground lug with set 34.5" screw is located near the handhole opening for proper grounding oft the pole. Decorative Base: 2-piece, clamshell: style cast aluminum material. 4s stainless steel, tamper-resistant screws are included for attachment. NITV Weight:: 20 Ibs Color: Black powder coat. Embedment: 41 ft. of embedment. A: 1-3/4" X5 3/4" size slotted opening is provided Tenon is 18i inches from the ground line for conduit entry. included Color: Black powder coat. Maximum Wind Rating: 100 mph wind zone with 1.3 gust factor. Warranty: 5 Years. Foundation Design: Foundation should be designed by an engineer familiar with local soil and wind conditions as well as local code where the pole(s) will bei installed. ACORN FIXTURE Standard LED Acorn Light Fixture: Textured clear polycarbonate acorn lens is attached to the cast aluminum base with 4 set screws. Cast aluminum base slips over top of the pole andi is secured with 3 set screws. All LED power options include a Mogul socket. Pole Height Wet location rated. (Above Grade) Weight: : 10 Ibs LED Power (Watt) Lumens Lumens Per Watt Voltage (Volt) 27 4,185 155 120-277 36 5,580 155 120-277 Decorative 45 6,975 155 120-277 Base 63 9,765 155 120-277 80 12,400 155 120-277 100 15,500 155 120-277 04"-- 18" 28" 4 Embedment Conduit Entry Decorative Base Disclaimer:. All dimensions and specifications are subject to change without any notice. Energy Light, Inc. is not responsible for any claims arising from improper loading what is attached to the light pole), improper use, incorrect foundation design and/or installation. Copyright 0 2024 Energy Light, Inc. All Rights Reserved 1881 Rose Road, Lake Zurich, IL 60047 d & 2 C - - - 6 - - - - D0 B C 0 E F C - & 8 & & 8 8 o 9 0 0 9 0 O 9 LL 0 9) 0 O 0 9 B & & 6 I - = E a I A E = a & 680 a e G) - C € o 8 - < 5 - = lE - - - a N DE - b LANCASTER LE ATING Lancaster Table & Seating 36 Gallon Heavy-Duty Round Black Steel EEA Slatted Outdoor Trash Can with Flat Lid #475STL36BKFLT Item #: 475STL36BKFLT Qty: Project: Approval: Date: TT - : - Features Round, slatted steel 36 gallon can with steel base Technical Data Includes ar rigid plastic liner inside and a flat lid Height 32: 11/16 Inches Convenient open lid design allows for easy, one-handed waste disposal Diameter 27; 3/161 Inches Lid lifts off for easy access to the plastic liner to change out Capacity 36 Gallons trash bags Heavy-duty design ideal for outdoor use in parks, Color Black municipalities, and schools Installation' Type Freestanding Lid Material Steel Lid1 Type Flat Liner Material Rigid Plastic Material Steel Shape Round 02025Lancaster Table&s Seating Technical Data Style Stationary Outdoor Trash Receptacles Type Trash Cans Usage Outdoor Notes & Details Enhancei thee efficiency andf functionality of your outdoor waster management system with this Lancaster Table & Seating 36 gallon! heavy-duty round black: slatted steeld outdoor trash can withi flat! lid. Craftedf from durable slatted: steel and a sturdys steel base, this 36 gallon cani is built to withstand! heavy usei in outdoor environments. Thei included rigid plasticl liner ensures easy waste disposal andi maintenance, while the flat lidk keeps trash mostly concealed: and! helps keepi it contained withini the can. Ideal for parks, municipalities, and: schools, this heavy- duty trash can is designedi to withstandt ther rigors of outdoor use andi maintain a clean, organized appearance. Featuring a convenient open! lido design, this trash can allows ford one-handed waste disposal, makingi it quick and easyf for guests ore employees to discard trash. The lid: also lifts off easily, providing hassle-free: accesst toi thep plasticl liner for efficient bag changes. Withi itsl heavy-duty construction. and practical design, this outdoor trash can is a reliables solution for keeping publics spaces clean andt tidy. Upgrade your waste management system with this durable, functional trash can that is perfect for outdoor use in a variety of settings. A WARNING: This product can expose yout to chemicals includingl lead, which: arel known to the State of Californiat to cause cancer and birth defects or other reproductive harm. Fori more information,got toy wendwamihnscaso 02025Lancaster Table&s Seating Slatted Steel Can LANCASTER ASSEMBLY INSTRUCTIONS TABLE & SEATING PARTS LIST: J TTTV Receptacle base Cable clips and topr rim 2F Pcs Receptacle halves Flat lid or rain Liner Security cable 2F Pcs bonnet lid 1Pc 1Pc HARDWARE: TOOLS REQUIRED: Allen wrench (included) Phillips head screwdriver (not included) Wrench or heavy-duty pliers (for lid; Head Screws Hex Head Screws Washers Allen Key not included) 2F Pcs 4mm 6Pcs 8mm 1Pc STEP 1 STEP 2 On a firm, flat surface, position the two receptacle Carefully lift and position the completed basket halves (A) together, lining up the two pre-drilled holes into the receptacle base (B), lining up the six at the top of the receptacle just below the ring. Insert a pre-drilled holes. Phillips head screw (G) into each hole, hand-tightening the screws. HH HHAT MHH HEA E B SLATTED STEEL CAN ASSEMBLY INSTRUCTIONS WW. LANCASTERTABLEANDSEATING.COM Slatted Steel Can LANCASTER ASSEMBLY INSTRUCTIONS TABLE & SEATING STEP 3 STEP 4 Insert a hex head screw (H) and a washer (J) into each of Adjust the position of the receptacle halves as needed the six pre-drilled holes located around the base. Do not before tightening all oft the hex head screws around tighten the screws completelyini this step. the base oft the can with the provided Allen wrench. Tighten the Phillips head screws around thet top ofthe HEKP trash can with a screwdriver (not included). HH T - - - - 0 STEP 5 STEP 6 Attach the security cable (F) to the cable lock bar on Insert the rigid plastic liner (C) into the receptacle, the inside top oft the receptacle. Once the cable is at- setting the lid (D) on the interior hooks at the top of tached, loop it through the lid's cable lock bar and use the trash can. the cable clips (E) to secure the cable tightly. C C E - AATTIIT ANITTTEE CFA SLATTED STEEL CAN ASSEMBLY INSTRUCTIONS WWWAIANCASTERIABLEAMOSEATING.COM o - o 0 0 o REL 3 A a - - o / S S & 4 N a de @ by 8 3 B A a EUENS 3 8 e & f de S LE a : 8 3 a E W- B 4 N - 9 de e 8 0 V A D f 3 3 S d0 6 5 of - 5 E e A a a de 6 3 9 6 3 E 4 N o a 00 0 3 m € V 4 5 a 8 d8 e 3 B 0 A 9 3 N S LE a 5 - 6 N 8 W- 6 E co 4 N n a de @ by 8 3 B A a ELES 3 E de f de S LE a : 8 3 a b W- a 4 - 0 6 a S 3 a - 2 3 de 8 de de B 9 - A a 3 W TA 6 e - S 5 6 t3 E 4 - 0 6 a S 3 a - 2 3 de 8 de de B 9 - A a 3 TA e 8 f à 6 e 2 E 6 t3 E 4 o a 8 de de e 1 B - A 9 3 0000b0 f de - 8 6 LE e 5 E 9 6 5 6 W- E co 4 - a 6 8 A )(o 00) en / a 5 - 0 a E E 8 0 a B e 4 3 B0 8 3 E E E € E 8 a 5 3 A - I 2 - I E 9 a 6 N - 8 8 a 3 2 1 X a 6 W- E 4 & - o 0 o 0 o E - o / / C C ) GI / d8 DE e 6 d0 2 - Bt D r 2 o 3 DD 8 8 8 8 E A & 6 ELRSE 0 0 5 a g o d% 09 0 6 a 3 W- E 00 4 de & - o 0 o 0 o 9) Q - de A - o a d 8 * o E df 3 3 5 E E 6 - 8 3 5 V 8 a € 2 - € I 5 de 3 e 8 a E a E 9 =- 4 @ Bt 8 e a e B of - a d9 I 8 o a A e e - - 3 E 00 5 5 3 2 8 a 5 8 / a = 4 1 MA CHYKE MAURICE & ASSOCIATES, INC. Architecture, Planning, & Technology Management Cannery Way (CW), Harriet Tubman Pavilion (HTP) and North Star Station Projects Cutsheets/Samples March 19, 2025 1.0 Cannery Way Cutsheets: 1.1 Brick Samples 1.1.1 Whitacre Brick Panel 1.1.2 Unilock Town Hall Paver 1.1.3 Glen Gery Empire Blue Paver 1.2 Replacement Wall Type: 1.2.1 Split Face Concrete Block 1.2.2 Flat Face Concrete Block 1.2.3 Brick 1.3 Native Replacement and New Trees (TBD by Barbara Paca - Landscape Architect) 1.4 Light Poles 1.4.1 Continue using existing 1.4.2 Double Light Fixture 1.4.3 Single Light Fixture 1.5 Park Bench (Optional) 1.6 Trash Cans (Optional) 1.7 Bollards (Optional) 2.0 Harriet Tubman Pavilion: 2.1 Paving: Unilock Richcliff, Dawn Mist, 3 Unit Random Bundle - Drive Friendly 2.2 Solar Canopy Structure: Galvanized Steel or Anodized Aluminum 2.3 Solar System: 4'x8',L Type, 72 Cell, 89Transparency, 430W, Vision Module System with vision mounting rails, inverters, etc. 2.4 Fascia, Guttering, downspouts as manufactured by PAC CLAD. 2.5 1,100 Rainflo 1,100 Gallon Above Ground Complete Rainwater Collection System 2.6 Optional: In Ground Well Light System 3.0 North Star Station: 3.1 Split Face Concrete Block Veneer with light gauge steel stud wall and roof system 3.2 Alternative Veneer/Interior Ceiling: Mataverde Thermally Modified Wood Siding (Hem FR). 3.3 Sliding Entrance Door: Stanley 3.4 Double Entrance Door: Kawneer 3.5 Windows: Kawneer 8400 TL 3.6 Exterior Bathroom Door: 3.7 Fascia, Guttering, downspouts as manufactured by PAC CLAD. P.0. Box 1456 Tel: 410-742-3996 902 W. Main Street Cell: 410-603-1463 Salisbury, MD. 21802-1456 E-Mail: Cma90@hotmail.com 2 3.8 Roof: Berridge Standing Seam Roof 3.9 Soffits: Berridge Standing Seam soffit panels 3.10 Rainflo 1,100 Gallon Above Ground Complete Rainwater Collection System Respectfully Submitted, wzbre Maurice Ngwaba, Ph.D., AIA Chyke Maurice & Assoc. Inc. CC: Adrian Holmes, President AGCDC Jermaine Anderson, AGCDC P.0. Box 1456 Tel: 410-742-3996 902 W. Main Street Cell: 410-603-1463 Salisbury, MD. 21802-1456 E-Mail: Cma90@hotmail.com 3/16/25, 7:51 PM RICHCLIFFO Pavers - Unilock Chicago CONTRACTOR COMMERCIAL BUILDER NILOCK EN Products > RICHCLIFFO RICHCLIFFO PRODUCT DETAIL V RICHCLIFF8 Inspired by the texture of natural cut flagstone, Richcliff offers superior durability and timeless appeal for patios, walkways, and even driveways when utilizing the Random Bundle. This Elegance product boasts a multitude of stone textures, which ensures that finished projects will have a completely random, and natural appearance. Unlike natural stone, which can crack, split, and fade, Richcliff is manufactured with up to four times the strength of conventional poured concrete. AI new large rectangle size is now available for use on its own or in combination with the traditional 3- stone random bundle for expanded patterning options and a larger- scale look. DAWN MIST LARGE RECTANGLE COLORS APPLICATIONS ittps:l/unilock.com/productrichcliff-chicago: 1/8 3/16/25, 7:51 PM RICHCLIFFO Pavers Unilock Chicago CONTRACTOR COMMERCIAL BUILDER NILOCK EN V SOLD INDIVIDUALLY LARGE RECTANGLE 302mm x 528mm X 60mm 11 7/8" x 20 7/8"x 2 3/8" RANDOM BUNDLE RECTANGLE SQUARE 226mm> X: 300mm> X 226mm 226mm x 60mm 60mm 87/8" X 11 7/8": x2 87/8"x8 87/8"x23/8" 3/8" SMALLRECTANGLE 150mm X: 226mm> x 60mm 57/8" 8 7/8" 2 3/8" PRODUCT GALLERY - - TECHNOLOGIES CHNOLOGIES ittps:l/unilock.com/productrichcliff-chicago: 2/8 3/16/25, 7:51 PM RICHCLIFFO Pavers - Unilock Chicago CONTRACTOR COMMERCIAL BUILDER NILOCK EN V ELEGANCE Deep, rich colors and a multitude of unique textures combine to deliver the timeless beauty of Unilock Elegance. From the timeworn look of European cobblestones, to the classic luxury of riven natural stone slabs, our Elegance collection offers styles you can't get anywhere else, and the look you purchase is the look that will last, with up to 4x the strength of poured in place concrete and EasyClean TM integral stain resistance. OUR TECHNOLOGIES COLORS DAWN MIST ELEGANCE PICK A COLOR ittps:l/unilock.com/productrichcliff-chicago: 3/8 3/16/25, 7:51 PM RICHCLIFFO Pavers Unilock Chicago CONTRACTOR COMMERCIAL BUILDER NILOCK EN V JOINTING V DETAIL MATTERS The color of jointing sand you choose can have an impact on the overall look and feel of your paver patio, driveway or pool deck. Experiment with different options here. Black Sand 3 Grey Sand Tan Sand INFORMATION V RICHCLIFFO The modular cut flagstone appearance of Richcliff is used by designers for both traditional and contemporary designs. EnduraColor M * Reala TM Technology, and Ultima M Concrete Technology are the features that make Richcliff ideal for driveways, patios and pool decks. Consider accenting with Courtstonee and Copthorne for a striking design. ittps:l/unilock.com/productrichcliff-chicago: 4/8 3/16/25, 7:51 PM RICHCLIFFO Pavers Unilock Chicago CONTRACTOR COMMERCIAL BUILDER NILOCK EN V STANDARD BASE - Min. 6"-8" of 34" Crusher Run gravel (any road base standard in accordance withA ASTM-D2940) compacted to 98% Standard Proctor Density (SPD). STANDARD BEDDING COURSE 1"thick of coarse sand-i in accordance with ASTM-D2940 screeded over base. ALTERNATIVE PERMEABLE BASE - Min. 6" - 8" of X4" clear open- graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.) ALTERNATIVE PERMEABLE BEDDING COURSE 1"1 thick of 1/4" clear open-graded chip stone (ASTMI No. 8) screeded over base. SPECIAL NOTE: CONCRETE DIRECT OVERLAY In some areas of the country and in some applications pavers are very successfully placed directly over concrete. Concrete as a base is in itself quite strong, but it can affect the structural integrity of the paver particularly in vehicular applications, where the concrete below is sub-par. Thei following considerations must be taken into account to insure that the concrete below the surface is ideal: 1. Concrete integrity concrete must be in good condition, and not crumbling 2. Drainage slope concrete below must be sloped away from all buildings and structures 3. Drainage holes - In lowest areas of the concrete, drill 1" holes in concrete (on 12" centers) andi fill holes with 44" chip (ASTM No. 8) 4. Base drainage the area below the concrete must not be subject to frost movement 5. Surface surface must be totally smooth and flat equivalent to the desired finished surface 6. Waterproofing- may be required when installing pavers over concrete where there is a basement or cold cellar below. Install an impervious rubber membrane over the surface prior to installing any pavers over the surface. 7. Jointing Sand Use an impervious polymeric sand when installing over concrete JOINTING MATERIAL AND JOINT STABILIZATION All sands must meet. ASTM C144 or C33 Specifications. For best appearance and optimal performance,, keep jointing materials approximately 1/8" below the chamfer (bevel edge) of the paver. Good Option: Ordinary sharpj jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand) Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based, joint sand stabilizer sealer. Always follow manufacturer's application specifications and requirements. HANDLING Do not bang edges together as chipping may occur. Because if its size and weight, always use a vacuum lifter device to place Richcliff XL units. ittps:l/unilock.com/productrichcliff-chicago: 5/8 3/16/25, 7:51 PM RICHCLIFFO Pavers Unilock Chicago CONTRACTOR COMMERCIAL BUILDER NILOCK EN V installed to retain the edge. PAVER COMPACTION Always use a protective polymer pad on the bottom of your compactor when doing the final compaction oft the pavers. An alternative is to use a rubber-roller compactor for the final compaction. CLEANERS Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer's dilution rates and application procedures. Always test a small area to make sure the results are as expected. SEALERS Product may be sealed for aesthetic or cleanliness reasons but it is not required Use any sealer approved for concrete pavers Selectt typefor desiredaesthetics Product mustbe cleaned beforesealing . Always read andi follow manufacturer's application procedures Always test a small area to make sure the results are as expected The Americans with Disabilities Act Accessibility Guidelines (ADAAG) provides measurable criteria to determine compliance, not individual product evaluation. Gaps, joints or openings, greater than %" horizontal and %" vertical should be avoided as they can disrupt wheelchair maneuvering (United States Access Board - Guidelines and Standards). ittps:l/unilock.com/productrichcliff-chicago: 6/8 3/16/25, 7:51 PM RICHCLIFFO Pavers Unilock Chicago CONTRACTOR COMMERCIAL BUILDER NILOCK EN V CENTER Top Trends for Outdoor Spaces The outdoor season is never long enough, is it? Homeowners are always looking for ways to create outside spaces that are unique, comfortable and help them make the most of their sunny days a. READ MORE > A Greener Choice: Advantages of Permeable Paving You may not think of concrete pavers as an eco-friendly product. But more and more homeowners are discovering the environmental benefits of permeable pavers. Not only are they. READ MORE > ittps:l/unilock.com/productrichcliff-chicago: 7/8 3/16/25, 7:51 PM RICHCLIFFO Pavers Unilock Chicago CONTRACTOR COMMERCIAL BUILDER NILOCK EN V individual touches can take your paving project from typical to something that is the envy of the street. Here are some tips to. READ MORE > NILOCK PRODUCTS PROJECTS RESOURCES SEL CT YOUR PRODUCTS LEARN AND PLAN REQUEST A CATALOG PAVERS DREAM FIND A CONTRACTOR ABLE RS N CONSI A ATIONS CT PLA ING GUIDE DRIVEWAY PAVERS OUTDOOR LIVING BASIC TECH GUIDE RAL STONE PAVERS POOL DECK DIY PAVER PATIO PORCELAIN TILES WALKWAYS OUTDOOR IDEA CENTER FIRE PITS FRONT ENTRANCES LITERATURE AND VIDEOS WALL PRODUCTS RET INING WALLS HEL LPFUL TOOLS POOL COPING AND WALL CAPS NTERLOCKING DRIVEWAYS PRODUCT DATA PIL LA AR CAPS PATIOS PR U CT TECH L C OGY STONE STEPS FIRE PITS AND FIREPLACES FAQ OUTDOOR KITCHENS SDS C STRUCTION 101 CUSTOMER SERVICE UNILOCK CONTACT US ABOUT US FETIME GUARANTEE FORM SUSTAINABILITY WHERE TO BUY TESTIMONIALS ACCESSIBILITY (AODA) CAREERS SOCIAL Copyright 0: 2025 Hengestone Holdings, Inc. Allr rights reserved. Privacy policy Terms of Use Sitemap Archive Website by ITW ittps:l/unilock.com/productrichcliff-chicago: 8/8 e E2-12 $ @ 3 8 n 3 E a : I 59 es e 4 183 645 X8X8SSH E 28495 o1 NIW 0E B 3 @ 3 € & S 3 - 3 @ 56 3 E DIXEXESS D-L E B le - GB 9 8 - 3 I E E $ a E # 1 4 43 ME# 3 I % E - * E - a E spaaev nai @ e : @ 3 8 d n 7 a D 5 5 - 5 5. 313 B 4 B5 LE 8 EE 65 345 8 E93 E 3. 75 à E 5 8 I : 1 - E a E5 : - 65 e E I : - 39 22 0 D s : I 33 x E a - - 3 5 5 5 8 I : E8 9 : E 58 - I I 1 8 - 9 - 55 5 E . S 89 83 : 5 a 8 - 3; E 6 E 1 3 E E3 dE 88 - EH 8 a 3 E6 s: 5o 089 - E E - u 3 E8 8 - 9 95 5 33 8 1 3 A : 5 3 34 : - I ai E E . - 3 E n E 3 E 8 8 2 G 3 9 5 : a E 53 & 85 E 9 9 a - E 2 2 e o 1 I E E EB 9 a 5 8 595 e 8 5 € à 51 a: 6 z r E 3 a 16 5 - E E 4 B Eg 9 1 a 8 e e E e - E I 1 5 8 E - 55 E 5 a 38 84 A 3 E - 5 9 5 0e 9 E E E : W - S - 3 a 8 a M w A s E B e - - BE E EF 28 e 6 - B E 2 8 - - 8 5 1 85 - # 8952 - E 5 i 5 E E Ep N E 8 E - N - - - E de E Dl E & E 3 D à E E B e 5 6 - & a E 8 & - E E dE M e E E - - E a 5: a C - a D0 5 a D : 1 3 2 a - I a a 5 8: - : a - 3 E - - 5 e d& - - 3 I 2 - 3 a B M E - E - E a :: 2 a = - - e - E E e B E € 2 E a E a de - E - a 5 a de 5 - I o e N E - E dE 2 E e 8 E e - : I 9 - a C n E 2 - - E 4: a a A E - e E 5 3 - E 3 a E a E a - a : 3 & - DE DB 0 a - E E 3 E a e - 0 - 88B E 35 E B W 25 a S4 3 R 4f 3 I 3 B 55 - I I E8 E E 8 35 E 19 83 W I I - 8 : I E B4 3 a E A8S9 : 8 5 # 4 9 1 W I 85 I Be 22 5 EP E 9 - B 8 6 s E B 5 I I - * I Df à : 9 E I - E a E 28 : I 1 8 - : E 4 2 E a a e 5 5 00 28 IE 1 I R - 85 SE - 5 8 E31 I 819 e - E3 B7 3 9 - HE 3 I e 3a 3 236 - de all LE a sag a E 8E5 78 58 € 0 - - V 4 ai - 9 - - a a E 3 @ @ 8 7 4 ! - E E 5 a a - N * - E - : D lyes : 4 4 182 5 5 de BE 22993 a N 1 0 E Click here to requestaquote. Search Home / Steel/ /: Tubing / Rectangular Tubing /H HSS8X8X1/2 HSS8X8X1/2 Category: Rectangular Tubing Aluminum Metal Building Components Stainless 1401 PRODUCTS 94 PRODUCTS 2361 PRODUCTS 1/3 00006 08000 Da E 00 I 000 90000 AAMA b ) Q00606088 0C0a 988808 LUa 018 0000 L Steel 2,873 PRODUCTS ABOUT METALS 2 GO Our desire to create and develop lasting relationships with our customers continues to bring both companies and individuals back to doing business with us. Location: 224 NI Hewitt Dr., Hewitt, TX 76643 Hours: OFFICE MON FRI 8:00. AM 5:00 PM WILLO CALL opens at 7:00AM Phone: (254): 235-7700 Email: sales@metals2go.com SERVICES Delivery Value Added Retail PRODUCTS Aluminum Stainless Steel Hewitt GREA ER WACO CHAM BE 2/3 à - BBB @2 2025 Metals 2 Go. All Rights Reserved. Privacy Policy 3/3 N - - I - - - - VA S - V - V - & C 0 V - a - N - C y A N - - % - A % à V V A a A 3 - a - A V - W K - % A W & & - W - %% A - a * S - N09 26ZUNI 2OL a 3 / E e QNW ELZNI 0 vB - - - 00 8 à 8 o 6 o 6 & WW08BZUNIZZOL - s 3 N e 3 2 a 0 > Z B à B o 6 o 6 & WWNPEIZINIZO8 le L $ E 3 N & - - 9 - W - y - V & & > 9 C 3 y C % > 3 C - % & d % - a & > V - > - % - - & - à C - a - - > - 9 y y M & VK A y E W W A D & 3 t N y & & W % V a & V V % - & y % V ( % V - W % % % - 0 A N - C a M a - & & & N N - V % 6 ( ) A W N C a 0 % I A D A A & & D N V A V I A - 0 V M V DE B NIW09' wa) N896 & 6 o 2 3 a & & a N 9 E : (WW2OO62). NZPLL 9 3 & a : e B a E S e 3 e e e à e 6o E A 9 - 8 o o 0 & 9 E lE 2 e e e e C 0 a WWB NN 28c NIOO NI U 1 E D WZL9LD OWN29'96) N369 OAWE'EZI NIOBE 3 3 3 3 E 3/16/25, 8:01 PM Commercial Solar Solutions for Architectural Projects Lumos Solar LuOS SOLAR SOLUTIONS Commercial Solar Solutions Custom solar structures for commercial applications Architectural Solar Solutions for Commercial Projects Lumos Solar's award-winning Solar Modules and Solar Structures offer a one-of-a-kind commercial solar solution for architects, design professionals, builders, city planners, facilities managers, installers and property owners incorporating solar into new or existing projects. Our solar solutions are unique and occupy a space where the solar industry and architectural building products overlap. Taking your projects from concept to reality is our specialty and we have an unparalleled track record of successful project completion. Our solar structures use our highest weather rated Frameless LSX or Bifacial Glass-Glass GSX Solar Module Systems which can be easily integrated into virtually any new or existing structure solar carports, facades, canopies, or anything you can imagine. Lumos SolarScapes, prefabricated solar modular structures, can be configured to fit any location and customized to meet your project goals. From large scale, custom designed solar awnings and canopies to bus shelters and standalone solar powered charging tables, our in house design and engineering team and national network of over 400 Lumos Authorized Professionals can make your project a reality. Contact us to get more information, discuss your project or get a free quote. tps/Amossdarcomlealtionscommercial 1/4 3/16/25, 8:01 PM Commercial Solar Solutions for Architectural Projects Lumos Solar - 5 LSX Solar Panel Awning ITulalip Gathering Hall Washington Case Studies Lbmos A Metro Gold line tps/Amossdarcomlealtionscommercial 2/4 3/16/25, 8:01 PM Commercial Solar Solutions for Architectural Projects Lumos Solar L FPL Solar Now Commercial Solar Projects VIEW MORE * Interested to learn more about working with Lumos? CONTACT US - * tps/Amossdarcomlealtionscommercial 3/4 PAC-TITE GUTTER AND DOWNSPOUT SYSTEMS The design of the PAC-Tite Gutter and Downspout Systems Variety of colors, sizes and metal gauges line improves water management performance while Easyi installation and decreased labor costs complementing: a building's aesthetic qualities. Custom Prefabricated miters and accessories to eliminate the need engineering, such as the heavy aluminum gutter strap design, fori field rabrication also promotes ease of installation and helps the gutter and downspout systems withstand harsh environments. Petersen's DOWNSPOUTS PAC-Tite line is the onlys system that's Factory Mutual The PAC-Tite industrial downspout is available in a variety of approved. It also features ANSI/SPRI GT-1 compliance. standard sizes, or it can be fabricated to meet specific job GUTTERS requirements. The open-face design makes clearing out debris PAC-Tite Gold gutters offer easy installation, outstanding ane easy task. Downspouts are manufactured with simple connection configurations and include three attachment oerformance and an attractive appearance. The products include a: 2-in. wide external wind strap every 6 feet and straps per 12-foot section, which enables fast gutter hangers every: 241 in. O.C. to comply with the ANSI/SPRI and easy installation. GT-1 Standard. The unique, heavy aluminum gutter hanger SCUPPER, COLLECTOR BOX is designed to eliminate the need for drilling and riveting and The PAC-Tite Gutter and Downspout Systems line includes allows for full thermal movement of the gutter. Offered with an a variety of custom-designed scuppers and collector boxes optional roof flange or slotted drain bars for ballast retention, that meet performance requirements that architects and PAC-Tite Gold gutters offer maximum roof drainage and ease contractors want. Their unique design provides maximum ofi installation in a one-of-a-kind edge metal solution. security and performance to protect against leaks, and is a Benefits include: decorative and functional means of water control. > ANSI/SPRI GT-1 tested to comply with the standard for gutter systems - FM-approved for wind uplift protection GUTTERS PAC-TITE Gold Gutter IGG-1 PAC-TITE Gold Gutter IGG-2 PAC-TITE Gold Gutter IGG-3 PAC-TITE Gold Gutter IGG-B PAC-TITE LTK-Style Gutter PAC-TITE LT Half Round Gutter DOWNSPOUTS SCUPPER, COLLECTOR BOX Industrial Downspout Industrial Downspout Corrugated Rectangular Round Downspout Thru-Wall Scupper Thru- Wall Collector Box (Closed) (Open) Downspout PAC-CLAD 800 PAC CLAD I PAC-CLAD.COM 02021 Petersen Aluminum CIRLISLE COM INDUSTRIAL DOWNSPOUT (Closed) The Industrial Downspout is available in a variety of standard sizes, or it can be fabricated to meet specific, job requirements. Downspouts are manufactured with simple connection configurations and include three attachment straps per 12' section, which enables fast and easy installation, CUSTOM CAPABILITIES Specially fabricated products are available to meet the unique needs of each project. COLORS Choose among a wide range of standard colors and finishes that meet your. job requirements. A 35-Year Kynar 5000 Finish Warrantyi is included on coil-coated standard colors, Custom post-coated Kynar 5000 colors are available (on aluminum substrate only) with ani included 10-Year Kynar 5000 Finish Warranty or a: 20-Year Kynar 5000 Finish' Warranty is available upon request. Anodized finishes are also available. Please email Technical Services regarding pricing for Anodized finishes, ACCESSORIES Factory fabricated: accessories provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings. MATERIAL ALSO INCLUDED Downspouts can be manufactured in thei following All straps are included and will arrive to the job site with the materials. product. 24 ga. steel - .050" aluminum .040" aluminum - .063"a aluminum PAC-CLAD > E T E R S E NI 800 PAC CLAD I PAC-CLAD.COM 02024 Petersen Aluminum CARLISLE COMPANY - Z W * 3 0 C - - - W A e 3 I e a e. B 8 de I 5 e - e 8 de 8 - e - 5 B e I S e e : - E 1 : € a - - e d0 5 - - E E 3 S e de - I I de - - e 2 5 N 8 E 8 t 5 - = 3 e E o 2 - 4 V a 6 - 6 0 5 5 - 8 0 a 6 A a B e E 2 E $ e 2 e E E E à de S - 8 f - a 3 - 3 a a a a a a 3 - 3 - 5 a a 8 3 3 a a - 9 3 3 E 8 a - 5 a 3 - 8 - 3 3 # E 5 e 8 8 de 5 - bn 0 a a e a E 3 3 E a a - a e 3 o e DE e - - : 8 - - a a a 1 - a - - a - 3 = E 63 E E a e a o i 3 2 B 00 a M a e a . 6E e - N € - : E E E I 8. - - 3 3 0 à I 1 2 B - : 8 - - I - E I E 5 1 3 3 - S 8 8 8 8 I e : 5. € - E a B 3 B: E - B de 2 I I &. 3 I I - I 3 r 3 I I 8 8 3 8 I 00 49 S 2 - RAINFLO PRECONFIGURED ABOVE GROUND SYSTEMS Simplify your project design and installation with a RainFlo complete rainwater collection system. The RainFlo AGS systems arrive preconfigured with all items installed on the tank. Simply connect the included components to your downspout and connect the downspout and pump to the tank. The system is designed with premium components for optimal performance in residential or commercial applications, and includes water storage, filtration, pumping, and hardware. COMPONENTS INCLUDED: SHIPPED WITH TANK COMPONENTS INSTALLED: inlet rain gauge overflow outlet pump connection 000 bulkhead fitting and plug ORDERING INFORMATION Part Number Gallon Capacity* Tank Dimensions Pump Additional Components 46" diameter X 50" 305AGS 305 height, with lid MHP50A Pump cover, first flush, leaf eater, calming inlet, floating extractor, overflow, hose 48" diameter x73" 500AGS 500 MHP75A (5'), tank level monitor, and hardware and height, with lid fittings 87" diameter X 53" 1100AGS 1100 MHP75A height, with lid 1550AGS 1550 87" diameter X 67" MHP150A Pump cover, first flush(qty. 2), leaf eater height, with lid (qty. 2), calming inlet, floating extractor, 87" diameter X 89" overflow, hose (5'), tank level monitor, and 2100AGS 2100 height, with lid MHP150A hardware and fittings *Once the tank is plumbed, the tank will hold less than the max gallon storage capacity, as the overflow outlet is located below the top oft the tank Preconfigured Above Ground Systems I - RainHarvest Systems RainHarvest.com 800-654-9283 RAINFLO' COMPLETE SYSTEM COMPONENTS We've selected premium components for optimal performance in our complete above ground rainwater collection systems. Please note: Additional PVC parts to connect the leaf eater to the first flush and the first flush to the inlet are required, but not included. First Flush Leaf Eater MHPA Series Pump Pump Cover Floating Extractor A simple and effec- Prevents debris from Multistage horizon- Protects pump from Stainless steel float- tive first flush water entering the rain- tal, above ground harsh environments ing filter with coarse diverter that requires harvesting system, pump with integral and includes a screen and backflow minimal mainte- improves water qual- flow regulation pro- matching base to preventer (pre- nance ity and reduces tank viding demand-based keep the pump off installed) maintenance pump control the ground Calming Inlet Overflow Hardware/Fittings Tank Level Monitor 3" Prevents swirling of the Acts as the tank overflow Pump connection, bulk- Tank level indicator with an water, disturbance of fine when the system is full, head, gaskets the hard- easy-to-read display dial sediments and introduces stainless steel mesh ware and fittings required and utilizes a weight float, oxygen at the bottom oft the screen prevents mosqui- for installation of a com- suspended on a string line tank (pre-installed) toes from entering tank, plete system (pre- to provide accurate read- plumb away from struc- installed) ings (pre-installed) tures (pre-installed) ADDITIONAL OPTIONS UV Complete Disinfection Systems RainFlo complete UV disinfection systems use sediment filtration and UV disinfection to clean and disinfect rainwater. System options include double or triple filtration, 10, 15, or 25 GPM, water flow direction from left to right (L-R) or right to left (R-L), and blue or clear filter housings. RainAid Tank Top Up Valve The RainAido valve is designed to connect a backup water supply to a rain- water tank. f the rainwater level drops below a pre-set level, the RainAido valve will open to maintain the water level using an alternative source. Connects via 3/4" male pipe thread. RainHarvest Preconfigured Above Ground Systems I RainHarvest Systems RainHarvest.com - 800-654-9283/013025 Systems Projects: Comments: C2CLIGHTS.m COAST2COASTLIGHTINGCO CW54L - BRASS / COMPOSITE 120V/277V LED OPEN FACE IN-GROUND WELL LIGHT SPECIFICATIONS: WATTAGES: 15W, 20W, 30W or 50W MODEL #: CW54L LISTINGS CE ROHS, TUV, FCC VOLTAGE: 100V"130V or 170V"277V AC POWER FACTOR: >0.95 A FREQUENCY: 50-60Hz LUMENS: 900 to 4,500 Lumens (depending on wattage) LUMENS EFFICACY: >80 Lm/W KELVIN (CCT): 2700K, 3000K, 4000K, 5000K, RGBW (Opt.) THD: 14.7% CRI: >80 IP RATING: IP65 Outdoor / Wet Location Use BEAM ANGLE (DEGREE): 25°, 40°, 110° (Consult Factory for others) MOUNTING: In-Ground Mounting MATERIALS: Brass Top / Composite Body USED FOR: Commercial / Residential Landscapes APPLICATIONS: Wall Washing, Tree / Flag Pole Uplighting, etc. LIFE SPAN (HOURS): 50,000+ Hours DIMMING COMPATIBLE: Dimmable (depending on LED options, consult LENGTH OF WARRANTY (YEARS): Lifetime (Fixture), 5 years (LED components) 6 WORKING ENVIRONMENT: -34°Cto +50°C (-30°F to +122°F) SUGGESTED REPLACEMENT FOR: 90-500 Watt Halogen (30-175W Metal Halide) 9 4.83" 12263mm 6.75" DAET e @ E 1.26" 0.50" AVTE : 205.4mm 8.i0" 1270-m D, 1.147 1.14" 7.15" AMETE MET 181.61mm .9 2" 23.30mm 5.55" DETa G Iso E ROHS TUV US 5 9001 Tare C€ 1509001 FG Project: Lightology Company: Location: Fixture Type: lightology.com 866-954-4489 SPEC #: WAC1314155 03-15-25 Approved On: Approved By: Grand n-Ground Light 12V By WAC Lighting Description The Grand In-Ground Light is a high output luminaire with a tiltable adjustable beam angle and integral on-board dimmer. It is also MLV dimmable. This durable fixture features corrosion-resistant aluminum alloy or die-cast brass construction and an IP67 rating, and it can be driven over by up to 4500 Ib. The Bronze on Brass option is solid brass coated in bronze, offering enhanced protection in coastal areas. A 6 ft lead wire and direct burial gel filled wire nuts are included. Note: A transformer is required, sold Shown in bronze on aluminum/ / clear separately. 0' o o/ 0 Specifications COLOR Clear BODY FINISH Bronze on Aluminum WATTAGE 25W DIMMER Included a DIMENSIONS 6.175"Wx7 7.56"H * INTEGRATED! LEDI MODULE TXLED/2SW/2VLED COUNTRY OF ORIGIN China Technical Information LAMPLIFE 500001 hours BEAM SPREAD Adjustable COLORI RENDERING 85 CRI LAMP COLOR 3000K LUMENS/WATT 80.00 LUMINOUS FLUX 2000lumens CLICK TO VIEW PRODUCT Notes: 1 MA CHYKE MAURICE & ASSOCIATES, INC. Architecture, Planning, & Technology Management Cannery Way (CW), Harriet Tubman Pavilion (HTP) and North Star Station Projects Cutsheets/Samples March 19, 2025 1.0 Cannery Way Cutsheets: 1.1 Brick Samples 1.1.1 Whitacre Brick Panel 1.1.2 Unilock Town Hall Paver 1.1.3 Glen Gery Empire Blue Paver 1.2 Replacement Wall Type: 1.2.1 Split Face Concrete Block 1.2.2 Flat Face Concrete Block 1.2.3 Brick 1.3 Native Replacement and New Trees (TBD by Barbara Paca - Landscape Architect) 1.4 Light Poles 1.4.1 Continue using existing 1.4.2 Double Light Fixture 1.4.3 Single Light Fixture 1.5 Park Bench (Optional) 1.6 Trash Cans (Optional) 1.7 Bollards (Optional) 2.0 Harriet Tubman Pavilion: 2.1 Paving: Unilock Richcliff, Dawn Mist, 3 Unit Random Bundle - Drive Friendly 2.2 Solar Canopy Structure: Galvanized Steel or Anodized Aluminum 2.3 Solar System: 4'x8',L Type, 72 Cell, 89Transparency, 430W, Vision Module System with vision mounting rails, inverters, etc. 2.4 Fascia, Guttering, downspouts as manufactured by PAC CLAD. 2.5 1,100 Rainflo 1,100 Gallon Above Ground Complete Rainwater Collection System 2.6 Optional: In Ground Well Light System 3.0 North Star Station: 3.1 Split Face Concrete Block Veneer with light gauge steel stud wall and roof system 3.2 Alternative Veneer/Interior Ceiling: Mataverde Thermally Modified Wood Siding (Hem FR). 3.3 Sliding Entrance Door: Stanley 3.4 Double Entrance Door: Kawneer 3.5 Windows: Kawneer 8400 TL 3.6 Exterior Bathroom Door: 3.7 Fascia, Guttering, downspouts as manufactured by PAC CLAD. P.0. Box 1456 Tel: 410-742-3996 902 W. Main Street Cell: 410-603-1463 Salisbury, MD. 21802-1456 E-Mail: Cma90@hotmail.com 2 3.8 Roof: Berridge Standing Seam Roof 3.9 Soffits: Berridge Standing Seam soffit panels 3.10 Rainflo 1,100 Gallon Above Ground Complete Rainwater Collection System Respectfully Submitted, wzbre Maurice Ngwaba, Ph.D., AIA Chyke Maurice & Assoc. Inc. CC: Adrian Holmes, President AGCDC Jermaine Anderson, AGCDC P.0. Box 1456 Tel: 410-742-3996 902 W. Main Street Cell: 410-603-1463 Salisbury, MD. 21802-1456 E-Mail: Cma90@hotmail.com NITTERHOUSE MASONRY PRODUCTS SPECIFICATIONS FOR: SPLIT FACE ARCHITECTURAL BLOCK Part I- General PRODUCTNAME FLASHING OF MASONRY WORK Architectural Split Face CMU's Install flashing at locations shown in the plans and in strict Architectural Split Face -Wide Profile CMU's accordance with the details and the proper masonry flashing practices Architectural Split Face - Fluted CMU's as outlined in the CONCRETE MASONRY HANDBOOK published by thel Portland Cement Association. SUBMITTAL WEEP HOLES AND VENTS Submit color samples for selection from manufacturer's Color Install weep holes and vents at proper intervals (according to typical Selection Kit. Submit product literature, certifications, and test practice) at courses above grade, above flashing, and at any water reports, full sizes sample(s) of each color specified. stops over windows, doors, and beams. OUALITY, ASSURANCE PROJECT/S SITE CONDITIONS Certifications: All load-bearing CMU comply with. ASTM C90. All Protection of Work: Cover walls each day after installation to keep non-load-bearing units comply with C129. All aggregates conform to open walls protected and dry. After units are installed, they should be ASTM C33. All sampling and testing shall be according to ASTM protected from damage by other trades performing operations that C140. can stain or otherwise damage the finished surfaces by covering walls Fire Resistance- Fire rated for up to 4 hours. See hourly ratings with plastic. required by NCMA TEK: Notes, available at www.niterhouse.com. Field Constructed Mock-ups: Construct a sample panel, no less INSPECTION than 4' X4 4' of units of each color and sizet to be used in the project. The faces ofall concrete masonry products shall be free from chips, Delivery. Storage & Handling: All CMU shall be delivered to the cracks, crazes or any other imperfections that would detract from the jobsite on stretch-wrapped wooden pallets. Cover with waterproof overall appearance ofthe finished wall when viewed from a distance covering (e.g. tarpaulins) to protect the blocks from inclement oftwenty (20) feet at right angles toi the wall with normal lighting, as weather. Handle blocks carefully to avoid breakage and damage to per ASTM C90 or ASTM C129. the finished surfaces. Protective foam shall be used to protect the faces. Store pallets in single stacks on level ground. CLEANING Keep walls clean during installation using brushes. Do not allow Part II Products excess mortar or smears to harden on the finished surface. Harsh FINISHES cleaning methods after walls have been erected may mar the surface Specify exact type of finish required: (Split Face, Split Wide ofthe blocks. Clean masonry units within 7 to 14 days ofl laying the Profile, Split Fluted) wall. Failure to do this could result in harsh methods needed to remove mortar and debris; thus, resulting in damaging the finish of SIZES AND SHAPES the product. Specify exact: sizes and shapes required. Also specify if finished ends, scores, and chamfers are required. FINALCLEANDOWN Standard finish dimensions 75/8" X 15: 5/8" typical The recommended clean down would be to use clear water and a Bed depths sizes nominal 4",6 6",8", 10", & 12". brush. Ifadditional cleaning is required, the use of a detergent masonry cleanser formulated for concrete masonry may be used, strictly following the manufacturer's instructions including thorough INTERGAL WATER REPELLANT pre-wetting ofthe walls and thorough rinsing. Do not use acid or All Architectural CMU's are produced with SIKA AE-3 integral abrasives on the finished surfaces. Failure to strictly follow water repellant. SIKA W-101 M mortar admixture must be added to manufacturer's instruction can result in permanent damage to the the mortar by the mason at a rate of 1 qt. bottle per 2 bags ofi mortar. finished faces. High-pressure power washing is not recommended. Mortar admix must be purchased from block manufacturer for warranty to apply. MAINTENANCE Nitterhouse Architectural Concrete Masonry Units, properly installed Part III - Execution and cleaned, need very little, if any future maintenance. Graffiti, LAYINGMASONRY WALLS paint, or stains might require the use of special cleaning agents. Lay units using the best concrete masonry practices. Install only Contact Nitterhouse for specific cleaning recommendations. quality units; reject any defective units. Units should include uniform 3/8" wide joints on the completed side of the wall. Draw blocks from 4 different pallets at a time during installation to maintain a more uniform wall color. Refer to NCMA TEK 3-1A for Hot and Cold MANUFACTURER QUALIFICATIONS weather construction practices. As manufactured by Nitterhouse Masonry Products, LLC INSTALLATION 859 Cleveland Ave. Chambersburg, PA 17201 Mortar] Bed and. Jointing: Phone: 717-267-4500 1.1 Lay units with full mortar coverage on head and bed joints. email: masonygntemouse.com 2. Tool all mortar joints when thumbprint hard into a concave wwentemolsenasonycon configuration. 3. Care should be taken to remove: mortar: from the face of masonry units before it sets. 4. Tuck point the of scored units for NITTERHOUSE joints proper appearance. Cutting:Make all unit cuts with motor-driven masonry saws, using either ana abrasive or diamond blade. Cut neatly and locate for best appearance MASONRY PRODUCTS, LLC a a I 7 1 - 3 9 - I 9 1 I - - - - 3 - I - * 2 ? C Z a à I : - I - - - E I - I ? T a - I - I 9 00 E 3 I 7 9 lB Mataverde Thermally Modified Hem-Fir Siding Gallery htps/www.mataverdedeckingcommataverde-themmalyy-modlified-hem. Mataverde Sustainable Decking and Siding Solutions MATAVERDER THERMAWOOD HEM- FIR SIDING GALLERY Thermally Modified Wood Mataverdeg Thermally Modified Hem-Fir Wood Siding is a beautiful and eco- friendly hardwood or softwood siding option. Thermally modified wood siding is far more stable than standard wood siding. The ThermaWood process used for Hemlock (Hem-Fir) 'cooks' the sugars out of the wood, which makes it far more resistant to insects, mold and fungus and creates a more durable wood siding product. Ideal for rainscreen cladding or T&G siding. Now available in fire retardant treated siding profiles. of12 3/16/2025, 6:08 PM Mataverde Thermally Modified Hem-Fir Siding Gallery htps/wwwmataverdedec.king.commattaverde-themaly-modlified-hem. a 2of12 3/16/2025, 6:08 PM Mataverde Thermally Modified Hem-Fir Siding Gallery htps/wwwmataveruedecking.commataverde-themmaly--modlified-hem. a 3of12 3/16/2025, 6:08 PM ICC ES EVALUATION SERVICE ICC-ES Evaluation Report ESR-1159 Reissued May 2024 This report also contains: CBC Supplement Subject to renewal May 2025 IWUIC Supplement ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any othera attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the report ora a recommendation fori its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this report, or as to any product covered by the report. Copyright 02 2024 ICC Evaluation Service, LLC. Allr rights reserved. DIVISION: 06 00 00- REPORT HOLDER: EVALUATION SUBJECT: WOOD, PLASTICS AND COMPOSITES CHEMCO, INC. SAFERWOOD-FX, THERMEX-FR, FRX, Section: 06 05 73.13- ADDITIONAL LISTEE: MATAVERDE, FLAME Fire-Retardant Wood FSR TREATMENT, INC. REPEL AND FIRELINE Treatment FIRE-RETARDANT- TREATED WOOD PRODUCTS 1.0 EVALUATION SCOPE Compliance with the following codes: 2018, 2015, 2012, 2009 and 2006 International Building Codee (IBC) 2018, 2015, 2012, 2009 and 2006 International Residential Codee (IRC) 2013 Abu Dhabi International Building Code (ADIBC)t tThe ADIBC is based on the 2009 IBC. 2009 IBC code sections referenced in this report are the same sections in the ADIBC. Properties evaluated: Structural Durability Surface-burning characteristics Hygroscopic properties Corrosion 2.0 USES Chemco, Inc., SaferWood-FX, Thermex-FR and FRX Tre-retardant-treated wood are used in interior and exterior applications (exposed to weather, damp or wet locations), and Mataverde, Flame Repel and Fireline fre-retardant-treated wood are used in exterior applications, as permitted by IBC Section 603.1 and IRC Section R802. 3.0 DESCRIPTION 3.1 General: The Chemco, Inc., SaferWood-FX. Thermex-FR, and FRX Tre-retardant-treated wood are solid sawn lumber and plywood pressure-mpregnated with Chemco's fire-retardant chemicals, and the Mataverde, Flame Repel and Fireline Tre-retardant-treated wood are solid sawn lumber pressure-impregnated with Chemco's fire- ANAB Page 1 of9 ESR-1159 Page 2 of 9 ICC-ES Most Widely Accepteda and7 Trusted retardant chemicals. The pressure-mpregnation of the lumber and plywood is pertormed in accordance with approved quality control procedures at the facility listed in Section 5.8 of this report. SaferWood-FX, Thermex-FR, FRX, Flame Repel and Fireline fre-retardant-treated lumber may be one of the following species: structural-grade southern pine, Douglas fir, Spruce-pine-fir, western red cedar, Redwood or western hem-fir. Mataverde fire-retardant-treated lumber includes only structural grade western hem-fir. SaferWood-FX, Thermex-FR and FRX fire-retardant-treated plywood fabricated with face and back veneers of the following species have been evaluated as being re-retardant-treated wood: structural-grade southern yellow pine, Douglas fir, white spruce, western red cedar or western hem-fir. The plywood is Structural I grade, exterior plywood complying with PS1. 3.2 Flame Spread: SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fre-retardant-treated lumber and plywood have a flame-spread index of 25 or less and a smoke-developed index of 450 or less when tested in accordance with ASTM E84 as modified by Section 2303.2 oft the IBC, Section R802.1.5 of the 2018 and 2015 IRC, or Section R802.1.3 of the 2012, 2009, and 2006 IRC. 3.3 Structural Strength: The structural pertormance of SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire- retardant wood products has been evaluated using ASTM D5516 and D6305 for plywood and ASTM D5664 and D6841 for lumber. The effects of the SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline Tre-retardant-treated treatment on the strength of the treated lumber and plywood must be accounted for in the design of wood members and their connections. 3.3.1 Lumber: The strength and stiffness design properties of lumber treated with SaferWood-FX, Thermex- FR, Mataverde, FRX, Flame Repel and Fireline fire-retardant chemicals used in applications at ambient temperatures up to 100°F (38°C) are subject to the design value adjustment factors shown in Table 1. The strength and stiffness design properties of lumber, when treated with SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire-retardant chemicals that are subject to elevated temperatures up to 150°F (66°C), are subject to the design value adjustment factors shown in Table 2. 3.3.2 Plywood: The maximum allowable live loads and spans for SaferWood-FX, Thermex-FR and FRX fire- retardant-treated plywood for roof applications given in Table 3 applicable to all species in Section 3.1. 3.4 Corrosion: The corrosion rate of the metals specified in Section 2304.10.5 of the 2018 and 2015 IBC, Section 2304.9.5 of the 2012, 2009 and 2006 IBC, Section R317.3 of the 2018, 2015, 2012, and 2009 IRC, or Section R319.3 of the 2006 IRC, in contact lumber treated with SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire-retardant-treated wood products, is not increased by the treatment. For interior applications, where there is no potential moisture present, the SaferWood-FX, Thermex and FRX fire-retardant-treated wood may be used with uncoated metals. For all other applications, where there is a potential of moisture, the products described in this evaluation report must be used with coated metals or as otherwise required by the applicable code. 3.5 Hygroscopicity: SaferWood-FX, Thermex-FR and FRX Tre-retardant-treated wood products are suitable for interior conditions where sustained relative humidity is 92 percent or less and condensation does not occur. 4.0 DESIGN AND INSTALLATION 4.1 General: Structural systems that include SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire- retardant-treated wood must be designed and installed in accordance with the applicable code, using the appropriate lumber design value adjustment factors and allowable total sheathing loads as set forth in this section (Section 4.1). The effects of SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire-retardant treatment on the strength of the treated lumber and plywood must be accounted for in the design of wood members and their connections. Ventilation, when required, must be provided in accordance with the applicable code. ESR-1159 Page 3 of 9 ICC-ES Most Widely Accepted and Trusted The strength and stiffness design properties of lumber, when treated with SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire-retardant chemicals and used in applications at service temperatures up to 100°F (38°C), are subject to the adjustment factors as set forth in Table 1. The strength and stiffness design properties oflumber, when treated with SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire-retardant chemicals and used in applications at service temperatures up to 150°F (66°C), are subject to the adjustment factors as set forth in Table 2. The allowable load and span properties of plywood, when treated with SaferWood-FX, Thermex-FR and FRX fire-retardant chemicals and used in roof applications at service temperatures up to 170°F (77°C), are subject to the span and load limitations as set forth in Table 3. 4.2 Fasteners: Fasteners used with SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire-retardant- treated wood must be manufactured from the materials specified in Section 2304.10.5 of the 2018 and 2015 IBC, Section 2304.9.5 of the 2012, 2009 and 2006 IBC, Section R317.3 of the 2018, 2015, 2012 and 2009 IRC, or Section R319.3 of the 2006 IRC, and are subject to the design value adjustment factors indicated in Table 1 and Table 2. 5.0 CONDITIONS OF USE: The SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline Tre-retardant-treated wood products described in this report comply with, or are suitable alternatives to what is specified in, those codes listed in Section 1.0 of this report, subject to the following conditions: 5.1 The products are manufactured, identified and installed in accordance with this report and the manufacturer's published installation instructions. If there are any conflicts between the manufacturer's published installation instructions and this report, this report governs. 5.2 Strength calculations must be subject to the design value adjustment factors and span and load values shown in Tables 1, 2 and 3. 5.3 The design value adjustment factors and span and load values given in this report must only be used for unincised dimensional lumber and plywood of the species noted in this report. 5.4 The fre-retardant-treated wood must not be used in contact with the ground. 5.5 The Tre-retardant-treated lumber must not be ripped or milled, since this will alter the surface-burning characteristics and invalidate the flame-spread classification. 5.6 Exposure to precipitation during storage or installation must be avoided. If material does become wet, it must be replaced or permitted to dry (maximum 19 percent moisture content for lumber and 15 percent moisture content for plywood) prior to covering or enclosure by wallboard or other construction materials (except for protection during construction). 5.7 The design value adjustment factors for lumber in Tables 1 and 2, and plywood allowable loads and spans in Table 3 oft this report, are applicable under elevated temperatures resulting from cyclic climatic conditions. They are not applicable under continuous elevated temperatures resulting from manufacturing or other processes which require special consideration in design, which is not within the scope of this report. 5.8 The SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline lumber and plywood are treated in Ferndale, WA under a quality control program with inspections by ICC-ES and QAI Laboratories. (AA-635). 6.0 EVIDENCE SUBMITTED Data in accordance with the ICC-ES Acceptance Criteria for ire-retardan-treated Wood (AC66), dated June 2015 (editorially revised April 2018). 7.0 IDENTIFICATION 7.1 Lumber and plywood treated with SaferWood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire-retardant chemicals shall be identified by the structural grade mark of an approved agency. In addition, all treated lumber and plywood must be stamped with the name of the inspection agency (QAI Laboratories); the Chemco, Inc. name and address; the name of the fire-retardant treatment; the species of wood treated; the flame-spread and smoke-developed indices; the treating date and method of drying after treatment; and the evaluation report number (ESR-1159). Additionally, the treated lumber and plywood must be identified with the words "Exterior" and/or "Interior" (see Figure 1 and Figure 21 for typical labels). ESR-1159 Page 4 of 9 ICC-ES Most Widely Accepted and7 Trusted 7.2 The report holder's contact information is the following: CHEMCO, INC. POST OFFICE BOX 875 FERNDALE, WASHINGTON 98248 (360) 366-3500 www.chemco.org www.saferwood.com info@chemco.org 7.3 The Additional Listee contact information is the following: FSR TREATMENT, INC. 9486 288th STREET MAPLE RIDGE, BRITISH COLUMBIA V2W 1L1 CANADA TABLE 1--DESIGN VALUE ADJUSTMENT FACTORS FOR: SAFERWOOD-FX, THERMEX-FR, FRX, MATAVERDE, FLAME REPEL & FIRELINE FIRE- RETARDANF-TREATED LUMBER COMPARED TO UNTREATED LUMBER [APPLICABLE AT SERVICE TEMPERATURES UP TO 100°F (38°C)]12 SPECIES PROPERTY WESTERN RED SOUTHERN PINE DOUGLAS FIR SPRUCE-PINE -FIR CEDAR / REDWOOD I WESTERN HEM-FIR Bending MOR 0.81 0.99 0.94 0.81 Bending MOE 0.97 1.0 1.0 0.97 Tension Parallel to Grain 0.76 0.80 0.88 0.76 Shear Parallel to Grain 0.95 0.95 0.89 0.89 Compression Parallel to Grain 1.0 1.0 0.94 0.94 Compression Perpendicular to Grain 0.95 0.95 0.95 0.95 Fasteners/connectors 0.90 0.90 0.89 0.89 Duration of load adjustments fors snow loads, seven-day (construction) loads, and wind loads specified in the IBC are permissible. Mataverdet fire-retardant-treatedi lumber only includes western hem-fir lumber species. TABLE 2--DESIGN VALUE ADJUSTMENT FACTORS FOR SAFERWOOD-FX, THERMEX-FR, FRX, MATAVERDE, FLAME REPEL & FIRELINE FIRE-RETARDANT-TREATED LUMBER COMPARED TO UNTREATED LUMBER [APPLICABLE AT SERVICE TEMPERATURES UP TO 150°F (66°C))' SPECIES WESTERN RED SOUTHERN PINE DOUGLAS-FIR SPRUCE-PINE-FIR CEDAR / REDWOOD I PROPERTY WESTERN HEM-FIR CLIMATE: ZONE CLIMATE ZONE CLIMATE ZONE CLIMATE ZONE 1A 1B 2 1A 1B 2 1A 1B 2 1A 1B 2 Bending MOR 0.24 0.47 0.73 0.84 0.90 0.97 0.76 0.84 0.91 0.24 0.47 0.73 Bending MOE 0.94 0.95 0.97 0.95 0.99 1.0 0.99 1.0 1.0 0.94 0.95 0.97 Tension Parallel to Grain 0.34 0.54 0.71 0.8 0.8 0.8 0.65 0.77 0.87 0.34 0.54 0.71 Shear Parallel to Grain 0.51 0.73 0.91 0.83 0.91 0.98 0.65 0.77 0.89 0.51 0.73 0.89 Compression Parallel to 0.56 0.78 0.96 0.84 0.92 0.99 0.70 0.82 0.94 0.56 0.78 0.94 Grain Compression Perpendicular 0.95 0.95 0.95 0.95 to Grain, Fasteners/connectors 0.51 0.73 0.91 0.83 0.90 0.90 0.65 0.77 0.89 0.51 0.73 0.89 Mataverde fre-retardan-treatedi lumber only includes western hem-firl lumber species. Climate Zone definitions: Zone 1-Where minimum rooflive! load or maximum grounds snow load S 20 psf (960F Pa) Zone 1A--Southwest Arizona, southeast Nevada (Las Vegas, Yuma-Phoenk-Tucson triangle) Zone 1B--A All other qualifying areas on the continental United States Zone 2-Minimum grounds snow load x 20p psf (960F Pa) ESR-1159 Page 5 of 9 ICC-ES Most Widely Accepted and Trusted TABLE 3--ALLOWABLE LIVE LOADS FOR ROOF SHEATHING (PSF) FOR SAFERWOOD-FX, THERMEX-FR AND FRX FRERETARDANT-TREATED PLYWOOD APPLICABLE UP TO 170°F (77°C) CLIMATE ZONE 1A Thickness SPAN (inches) (inch) 12 16 19.2 24 30 32 36 40 48 60 5/16 64 32 - 38 105 55 35 - - - - 15/32, "2 154 82 54 31 - - 19l32. 5/s 247 135 91 54 31 - 23132 31 314 172 116 71 42 35 78 397 219 149 92 55 47 - 1 533 296 202 126 77 66 38 1'/8 676 376 258 161 100 86 51 39 CLIMATE. ZONE 1B Thickness SPAN (inches) (inch) 12 16 19.2 24 30 32 36 40 48 60 5/16 105 55 35 - - 38 158 80 49 34 - - 15132. 2 244 133 89 54 31 - - - 1932. 5ls 388 214 146 90 54 46 - - 23/32, 314 490 271 185 115 70 60 35 7l8 619 344 236 147 91 78 46 35 1 830 463 318 200 124 108 65 50 1'8 1051 587 404 255 160 139 84 66 43 CLIMATE. ZONE 2 Thickness SPAN (inches) (inch) 12 16 19.2 24 30 32 36 40 48 60 5/16 157 84 55 32 - - - 38 248 135 91 55 31 - - - 15132. '2 359 198 134 82 49 42 - - - 19l32. 5/s 568 315 216 135 83 71 41 23132. 3k 717 399 274 172 106 92 55 42 78 903 504 347 218 136 118 71 56 36 1 1210 676 507 295 185 162 98 78 51 1'8 1530 856 592 375 236 207 127 101 67 39 For SI: 1 inch = 25.4r mm, 1 psf - 47.9 N/m? NOTES: 1. Fastener size and spacing must be as required in the applicable code for untreated plywood of the same thickness. 2. Plywood must be Structural grade, exterior plywood. 3. Live loads int table are based on plywood panel size of 4' by 8' with plywood face grain across (perpendicular to) the supports. 4. Tabulated loads are based on bending. Live loads for Zone 1A are based on duration of load adjustment for 7-day (construction loads) of 1.25. Tabulated loads for Zone 1B and. Zone 2 are based on duration of load adjustment for snow of 1.15. 5. A dead load of 10 psf was used to determine the allowable live loads. 6. Span not to exceed pre-treatment span rating. 7. Chemco does not recommend' 5he" or 318" panel thicknesses for roofing applications. Climate Zone definitions: Zone 1-Where minimum roof live load or maximum ground snow load S 20 psf (960 Pa) Zone 1A-Southwest Arizona, southeast Nevada (Las Vegas, Yuma-Phoenk-Tucson triangle) Zone 1B-All other qualifying areas on the continental United States Zone 2-Minimum ground snow load x: 20 psf (960 Pa) ESR-1159 Page 6 of 9 ICC-ES Most Widely Accepted and7 Trusted Chemco, Inc. Chemco, Inc. Chemco, Inc. Chemco, Inc. Ferndale, Washington Ferndale, Washington Ferndale, Washington Ferndale, Washington SaferWoodi Pressure Treated SaferWood Pressure Treated SaferWood Pressure Treated SaferWood Pressure Treated Fire-Retardant Lumber Fire-Retardant Plywood Fire Retardant Lumber Fire Retardant Plywood ICC ES Report ESR-1159 ICC ES Report ESR-1159 ICC ES Report ESR-1159 ICC ES Report ESR-1159 ESL1 1021 ESL 1021 ESL1 1021 ESL 1021 Classification: Exterior Classification: Exterior Classifiçation: Interior Classification: Interior Species: Species: Species: Species: Tested per ASTM E84/UL 723 Testedper ASTME E84/UL 723 Tested per ASTM E84 /ULI 723 Tested per ASTME E84 /UL7 723 Extendedi for 30r min,noincreasei inli listed Extended for 301 min, noincreaseit inl listed There was no evidence of significant There was no evidence of significant Classification whens subjectedt tos standard Classification whens subjectedt tos standard progressive combustion when the test progressive combustion when the test raint test(ASTMD2898) KDAT raint test(ASTMD2898) KDAT was extended for 30r min. KDAT wase extended for 30r min. KDAT FSI: FSI: FSI: FS!: SDI: SDI: SDI: SDI: Treated Treated Treated Treated (Month/Year): (Month/Year): (Month/Year) (Month/Year) QAI LABORATORIES QAI LABORATORIES QAI LABORATORIES QAI LABORATORIES IAS Report No.AA-635 IAS Report No.AA-635 IAS Report NO.A AA-635 IAS Report NO. AA-635 Chemco Exterior Lumber Chemco Exterior Plywood Chemco Interior Lumber Chemco Interior Plywood FIGURE 1-TYPICAL LABELS FOR SAFERWOOD-FX, THERMEX-FR AND FRX FIRE-RETARDANT LUMBER. AND PLYWOOD Mataverde Pressure' Treated Flame Repel Pressure Treated Fireline Pressure Treated Fire- Retardant Lumber Fire- Retardant Lumber Fire- Retardant Lumber ICC ES Report ESR-1159 ICC ES Report ESR-1159 ICC ES Report ESR-1159 Classification: Exterior Classification: Exterior Classification: Exterior Species: Species: Species: Tested Per ASTM E 84/UL 723 Tested Per ASTM E 84/UL 723 Tested Per ASTM E 84/UL723 Extended for 30 Min, no increase in Extended for 30 Min, no increase in Extended for 30 Min, no increase in listing Classification when subjected to listing Classification when subjected to listing Classification when subjected to standard rain test (ASTM D2898) KDAT standard rain test (ASTM D2898) KDAT standard rain test (ASTM D2898) KDAT FSI: FSI: FSI: SDI: SDI: SDI: Treated Treated Treated (Month/Year) (Month/Year) CUT-OUT (Month/Year) QAI LABORATORIES QAI LABORATORIES QAII LABORATORIES IAS Report No. AA-635 IAS Report No. AA-635 IAS Report No. AA-635 Treated by: Chemco, Inc. Treated by: Chemco, Inc. Treated by: Chemco, Inc. Ferndale Washington Ferndale Washington Ferndale Washington FIGURE 2-TYPICAL LABELS FOR MATAVERDE, FLAME REPEL AND FIRELINE FIRE-RETARDANT-TREATED EXTERIOR LUMBER ICC ES EVALUATION SERVICE" ICC-ES Evaluation Report ESR-1159 CBC and CRC Supplement Reissued May 2024 This report is subject to renewal May 2025. www.icc-es.org I (800) 423-6587 I I (562) 699-0543 A Subsidiary of the International Code Councile DIVISION: 06 00 00--WOOD, PLASTICS AND COMPOSITES Section: 06 05 73.13-Fire-Retardant Wood Treatment REPORT HOLDER: CHEMCO, INC. EVALUATION SUBJECT: SAFERWOOD-FX, THERMEX-FR, FRX, MATAVERDE, FLAME REPEL AND FIRELINE FIRE-RETARDANT-TREATED WOOD PRODUCTS 1.0 REPORT PURPOSE AND SCOPE Purpose: The purpose of this evaluation report supplement is to indicate that Saferwood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire-retardant-reated wood, described in ICC-ES evaluation report ESR-1159, has also been evaluated for compliance with the codes noted below: Applicable code editions: 2019 Califoria Building Code (CBC) For evaluation of applicable chapters adopted by the California Office of Statewide Health Planning and Development (OSHPD). AKA: California Department of Health Care Access and Information (HCAI) and the Division of State Architect (DSA), see Sections 2.1.1 and 2.1.2 below: 2019 California Residential Code (CRC) 2.0 CONCLUSIONS 2.1 CBC: The Saferwood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline ire-retardant-treated wood, described in Sections 2.0 through 7.0 of the evaluation report ESR-1159, complies with CBC Chapters 8 and 23, provided the design and installation are in accordance with the 2018 International Building Codee (IBC) provisions, as applicable, noted in the evaluation report. The Saferwood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fre-retardant-treated wood may be used in the exterior design and construction of new buildings located in a Fire Hazard Severity Zone within a State Responsibility Areas or any Wildland-Urban Interface Fire Area, provided installation is in accordance with the 2018 International Building Codee (IBC) provisions noted in the evaluation report and the additional requirements of Section 701A.3 and 703A of the CBC. This fre-retardant-treated wood complies with the performance requirements of CBC Section 703A.5.2.1 and Section 704A.3 items 1 and 2. 2.1.1 OSHPD: The applicable OSHPD Sections and Chapters of the CBC are beyond the scope of this supplement. 2.1.2 DSA: The applicable DSA Sections and Chapters of the CBC are beyond the scope of this supplement. 2.2 CRC: The Saferwood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fre-retardant-treated wood, described in Sections 2.0 through 7.0 of the evaluation report ESR-1159, complies with the CRC, provided the design and installation are in accordance with the 2018 International Residential Codee (IRC) provisions, as applicable, noted in the evaluation report. ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not: specifically addressed, nor are they to be construed as an endorsement oft the subject of the report or a recommendation) fori its use. There is no warranty by ICC Evaluation. Service, LLC, express or implied, as ANAB to any findingo or other matter in this report, or as to any product covered by the report. Copyright 0: 2024 ICC Evaluation Service, LLC. All rights reserved. Page 7 of9 ESR-1159 CBC and CRC Supplement I Most Widely Accepted and Trusted Page 8 of 9 The Saferwood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fire-retardant-treated wood may be used in the exterior design and construction of new buildings a located in a Fire Hazard Severity Zone within State Responsibility Areas or any Widland-Urban Interface Fire Area, provided installation is in accordance with the 2018 International Residential Codee (IRC) provisions noted in the evaluation report and the additional requirements of Section R337.1.3.1 and R337.3 of the CRC. This fre-retardant-treated wood complies with the performance requirements of CRC Section R337.3.5.2.1 and Section R337.4.3 items 1 and 2. This supplement expires concurrently with the evaluation report, reissued May 2024. ICC ES EVALUATION SERVICE* ICC-ES Evaluation Report ESR-1159 IWUIC Supplement Reissued May 2024 This report is subject to renewal May 2025. www.icc-es.org - I (800) 423-6587 I (562) 699-0543 A Subsidiary of the International Code Counci/e DIVISION: 06 00 00--WOOD, PLASTICS AND COMPOSITES Section: 06 05 73.13-Fire-Retardant Wood Treatment REPORT HOLDER: CHEMCO, INC. EVALUATION SUBJECT: SAFERWOOD-FX, THERMEX-FR, FRX, MATAVERDE, FLAME REPEL AND FIRELINE FIRE-RETARDANT-TREATED WOOD PRODUCTS 1.0 REPORT PURPOSE AND SCOPE Purpose: The purpose of this evaluation report supplement is to indicate that Saferwood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fre-retardant-treated wood, described in ICC-ES evaluation report ESR-1159, has also been evaluated for compliance with the codes noted below: Applicable code editions: 2018, 2015, 2012 and 2009 International Wildland-Urban Interface Code (IWUIC) 2.0 CONCLUSIONS The Saferwood-FX, Thermex-FR, FRX, Mataverde, Flame Repel and Fireline fre-retardant-treated wood, described in Sections 2.01 through7.0 of the evaluation report ESR-1159, complies with International Widland-Urban Interface Code Section 503.2, Item 3 as an ignition-resitant building material; and may be used in the exterior design and construction of buildings under the International Wildland-Urban Interface Code where an ignition-resistant material is required, provided the design and installation are in accordance with the 2018, 2015, 2012 and 2009 International Widland-Urban Interface Code (IWUIC) provisions noted in the evaluation report. This supplement expires concurrently with the evaluation report ESR-1159, reissued May 2024. ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not: specifically addressed, nor are they to be construed as an endorsement oft the subject of the report or a recommendation) for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as ANAB to any finding or other matter in this report, or as to any product covered by the report. Copyright 0: 2024 ICC Evaluation Service, LLC. All rights reserved. Page 9 of9 STANLEY. Access Technologies a G 65 - SA VEN . 3 - SRA Re - o % - SLIDING AUTOMATIC ENTRANCES: DURA-GLIDE 3000 SERIES, BI-PARTING 1.03 - BI-PARTING WITH OPTIONAL TRANSOM 1.03.01 - BI-PARTING 1.03.02 - BI-PARTING WITH OPTIONAL TRANSOM 1.03.03 - BI-PARTING WITH ACCESS CONTROL, SURFACE 1.03.04 - BI-PARTING WITH TRANSOM & ACCESS CONTROL, SURFACE 1.03.05 - BI-PARTING WITH ACCESS CONTROL, RECESSED 1.03.06 - BI-PARTING WITH TRANSOM & ACCESS CONTROL, REC. 02 2018 Stanley Access Technologies, LLC. OMO' d8-025 00g01 ONIMVEO £O'L S10Z J ONIN3dO Hon 108 NOSNVEL HIM 1H9I3H 39VMOVd 1H9I3H 39VMOVd [LEEz] .26 [coz] .8 9NIN3dO 8V3TO [s602] .z/ [sz] 853 6 - o de N [v] .2/L + 8g] z/1 L [vt] .4/E L [ci] z/L 5 8 T 8 4 - 0 7 ) [BuLi] 4t IHOI3H 39VMOVd [ZEEZ] 26 WOSNVEI HLIM IHOIEH 39vMOVd 200 0 ONIMVAO go1 39Vd BI-PARTING DURA-GLIDE PROJECT INFORMATION STANLEY. PROJECTI NAME: 3000 LOCATION: Access Technologies SERIES DOORI NUMBER(S): DATE: SHEET: OF 1/4" SHIM SPACE PACKAGE WIDTH COMBINED ACTIVATION/ ELECTRICAL 6" [152] 5 SAFETY SENSOR n 00 he ACCESS - - COVER INTERIOR EXTERIOR, FRAME WIDTH 4 1/2" [114] BE "sO" "SX" "SX" "SO" SEE THRESHOLD- DETAILS & ELEVATION VERTICAL SECTION PACKAGE WIDTH INTERIOR I - NOTES "sO" "SX" "so" 1. ELECTRICAL REQUIREMENTS: 120 VAC, 5 AMP MIN TO POWER EXTERIOR OPERATOR BY ELECTRICAL CONTRACTOR. 2. ROUGH OPENING SHALL PROVIDE 1/4"[6] SHIM SPACE ON SIDES AND TOP OF PACKAGE. 3. LIMITS OF ACTIVATION AND SAFETY ZONES ARE FOR REFERENCE ONLY; SEE ANSI/BHMA A156.10 FOR DETAILED REQUIREMENTS. COMBINED- CLEAR DOOR OPENING 4. SEE SPECIFICATIONS FOR ADDITIONAL INFORMATION. ACTWATION/SAFEIY EMERGENCY SENSOR EACH PLAN BREAKOUT SIDE OF DOOR SIDELIGHT AND SLIDING DOOR HEADER ABOVE 1 3/4" [44] INTERIOR "sX" "SX" EXTERIOR "SO" 'SO" TYPICAL PACKAGE DIMENSIONS (NARROW STILE) PACKAGE WIDTH 1/4" SHIM SPACE- NOMINAL DOOR PANEL EMERGENCY ROUGH OPENING PACKAGE CLEAR NOMINAL BREAKOUT WIDTH DOOR WIDTH NOM. WIDTH OPENING 2 HORIZONTAL SECTION 120" 48.3" 30.3" 105.5" 4 144" 60.3" 36.3" 129.5" 168" 72.3" 42.3" 153.5" REVISION: 03/04/2019 PAGE: 1.03.01 BI-PARTING WITH TRANSOM DURA-GLIDE PROJECT INFORMATION STANLEY. PROJECTI NAME: 3000 LOCATION: Access Technologies SERIES DOORI NUMBER(S): DATE: SHEET: OF PACKAGE WIDTH ELECTRICAL 4 SHIM SPACE COMBINED ACTIVATION/ 6" [152] 5 SAFETY SENSOR n - - o AUE U ACCESS COVER INTERIOR EXTERIOR "sO" "SX" "SX" "SO" FRAME WIDTH 4 1/2" [114] ds ELEVATION SEE THRESHOLD- DETAILS & PACKAGE WIDTH VERTICAL SECTION INTERIOR I - "sO" "SX" "so" NOTES 1. ELECTRICAL REQUIREMENTS: 120 VAC, 5 AMP MIN TO POWER EXTERIOR OPERATOR BY ELECTRICAL CONTRACTOR. 2. ROUGH OPENING SHALL PROVIDE 1/4"[6] SHIM SPACE ON SIDES AND TOP OF PACKAGE. 3. LIMITS OF ACTIVATION AND SAFETY ZONES ARE FOR REFERENCE ONLY; SEE ANSI/BHMA A156.10 FOR DETAILED COMBINED- CLEAR DOOR OPENING REQUIREMENTS. ACTWATION/SAFEIY EMERGENCY 4. SEE SPECIFICATIONS FOR ADDITIONAL INFORMATION. SENSOR EACH BREAKOUT SIDE OF DOOR PLAN SIDELIGHT AND SLIDING DOOR HEADER ABOVE 1 3/4" [44] INTERIOR "SX" "SX" EXTERIOR "SO" 'sO" PACKAGE WIDTH 1/4" SHIM SPACE TYPICAL PACKAGE DIMENSIONS (NARROW STILE) ROUGH OPENING NOMINAL DOOR PANEL EMERGENCY PACKAGE CLEAR NOMINAL BREAKOUT WIDTH DOOR WIDTH NOM. WIDTH OPENING 2 HORIZONTAL SECTION 120" 48.3" 30.3" 105.5" 144" 60.3" 36.3" 129.5" 168" 72.3" 42.3" 153.5" REVISION: 03/04/2019 PAGE: 1.03.02 BI-PARTING WITH ACCESS CONTROL, SURFACE DURA-GLIDE PROJECT INFORMATION STANLEY. PROJECTI NAME: 3000 LOCATION: Access Technologies SERIES DOORI NUMBER(S): DATE: SHEET: OF ELECTRIC SOLENOID 1/4" SHIM SPACE PACKAGE WIDTH LOCK ELECTRICAL COMBINED ACTIVATION/ SAFETY SENSOR 6" [152] a - - ACCESS COVER o INTERIOR EXTERIOR o FRAME WIDTH 4 1/2" [114] "sO" "SX" "SX" "SO" PANIC DEVICE SEE THRESHOLD ELEVATION DETAILS & VERTICAL SECTION PACKAGE WIDTH INTERIOR I - NOTES "sO" "SX" "so" 1. ELECTRICAL REQUIREMENTS: BY ELECTRICAL CONTRACTOR 120 VAC, 5 AMP MIN TO POWER OPERATOR EXTERIOR CONTROL CIRCUIT FROM SECURE ACTIVATION TO OPERATOR 2. ROUGH OPENING SHALL PROVIDE 1/4"[6] SHIM SPACE ON SIDES AND TOP OF PACKAGE. 3. LIMITS OF ACTIVATION AND SAFETY ZONES ARE FOR REFERENCE ONLY; SEE ANSI/BHMA A156.10 FOR DETAILED CLEAR DOOR OPENING REQUIREMENTS. COMBINED- EMERGENCY 4. SEE SPECIFICATIONS FOR ADDITIONAL INFORMATION. ACTWATION/SAFEIY BREAKOUT SENSOR EACH PLAN SIDE OF DOOR SIDELIGHT AND SLIDING DOOR -PANIC DEVICE HEADER ABOVE INTERIOR 1 3/4" [44] EXTERIOR "so" SO" TYPICAL PACKAGE DIMENSIONS (NARROW STILE) PACKAGE WIDTH 1/4" SHIM SPACE- ROUGH OPENING PACKAGE NOMINAL CLEAR DOOR PANEL EMERGENCY WIDTH DOOR NOMINAL BREAKOUT OPENING WIDTH NOM. WIDTH 2 HORIZONTAL SECTION 120" 48.3" 4 30.3" 105.5" 144" 60.3" 36.3" 129.5" 168" 72.3" 42.3" 153.5" REVISION: 03/04/2019 PAGE: 1.03.03 BI-PARTING WITH TRANSOM & ACCESS CONTROL, SURFACE DURA-GLIDE PROJECT INFORMATION STANLEY. PROJECTI NAME: 3000 LOCATION: Access Technologies SERIES DOORI NUMBER(S): DATE: SHEET: OF PACKAGE WIDTH ELECTRICAL - /4" SHIM SPACE ELECTRIC SOLENOID LOCK COMBINED ACTIVATION/ SAFETY SENSOR - - 6" [152] uE ACCESS COVER INTERIOR a EXTERIOR 1 "sO" "SX" "SX" "SO" AR o FRAME WIDTH 4 1/2" [114] PANIC DEVICE 2 ELEVATION SEE THRESHOLD DETAILS 6 PACKAGE WIDTH VERTICAL SECTION INTERIOR I - NOTES "sO" "SX" "so" 1. ELECTRICAL REQUIREMENTS: BY ELECTRICAL CONTRACTOR 120 VAC, 5 AMP MIN TO POWER OPERATOR EXTERIOR CONTROL CIRCUIT FROM SECURE ACTIVATION TO OPERATOR 2. ROUGH OPENING SHALL PROVIDE 1/4"6] SHIM SPACE ON SIDES AND TOP OF PACKAGE. 3. LIMITS OF ACTIVATION AND SAFETY ZONES ARE FOR REFERENCE ONLY; SEE ANSI/BHMA A156.10 FOR DETAILED COMBINED- CLEAR DOOR OPENING REQUIREMENTS. ACTWATION/SAFEIY EMERGENCY 4. SEE SPECIFIÇATIONS FOR ADDITIONAL INFORMATION. BREAKOUT SENSOR EACH PLAN SIDE OF DOOR SIDELIGHT AND SLIDING DOOR -PANIC DEVICE HEADER ABOVE INTERIOR 1 3/4" [44] SX" EXTERIOR "SO" 'so" TYPICAL PACKAGE DIMENSIONS (NARROW STILE) PACKAGE WIDTH 1/4" SHIM SPACE- ROUGH OPENING PACKAGE NOMINAL CLEAR DOOR PANEL EMERGENCY WIDTH DOOR NOMINAL BREAKOUT OPENING WIDTH NOM. WIDTH 2 HORIZONTAL SECTION 120" 48.3" 30.3" 105.5" 144" 60.3" 36.3" 129.5" 168" 72.3" 42.3" 153.5" REVISION: 03/04/2019 PAGE: 1.03.04 BI-PARTING WITH ACCESS CONTROL, RECESSED DURA-GLIDE PROJECT INFORMATION STANLEY. PROJECTI NAME: 3000 LOCATION: Access Technologies SERIES DOORI NUMBER(S): DATE: SHEET: OF ELECTRIC SOLENOID 1/4" SHIM SPACE LOCK -COMBINED PACKAGE WIDTH ACTIVATION/, SAFETY ELECTRICAL SENSOR 9 o 6" [152] ACCESS COVER - a B INTERIOR EXTERIOR FRAME WIDTH RECESSED 4 1/2" [114] PANIC DEVICE "SO" "SX" "SX" "sO" 2 1 SEE THRESHOLD & ELEVATION DETAILS VERTICAL SECTION PACKAGE WIDTH INTERIOR I - NOTES "sO" "SX" "so" 1. ELECTRICAL REQUIREMENIS: BY ELECTRICAL CONTRACTOR EXTERIOR 120 VAC, 5 AMP MIN TO POWER OPERATOR CONTROL CIRCUIT FROM SECURE ACTIVATION TO OPERATOR 2. ROUGH OPENING SHALL PROVIDE 1/4"[6] SHIM SPACE ON SIDES AND TOP OF PACKAGE. 3. LIMITS OF ACTIVATION AND SAFETY ZONES ARE FOR REFERENCE ONLY; SEE ANSI/BHMA A156.10 FOR DETAILED COMBINED- CLEAR DOOR OPENING REQUIREMENTS. ACTWATION/SAFEIY EMERGENCY 4. SEE SPECIFICATIONS FOR ADDITIONAL INFORMATION. SENSOR EACH PLAN BREAKOUT SIDE OF DOOR SIDELIGHT AND SLIDING DOOR RECESSED PANIC DEVICE7 1 3/4" [44] HEADER ABOVE INTERIOR "SX" "SX" 3 & EXTERIOR "SO" 'sO" TYPICAL PACKAGE DIMENSIONS (NARROW STILE) PACKAGE WIDTH 1/4" SHIM SPACE- ROUGH OPENING PACKAGE NOMINAL CLEAR DOOR PANEL EMERGENCY WIDTH DOOR NOMINAL BREAKOUT OPENING WIDTH NOM. WIDTH 2 HORIZONTAL SECTION 120" 48.3" 30.3" 105.5" 144" 60.3" 36.3" 129.5" 168" 72.3" 42.3" 153.5" REVISION: 03/04/2019 PAGE: 1.03.05 BI-PARTING WITH TRANSOM & ACCESS CONTROL, RECESSED DURA-GLIDE PROJECT INFORMATION STANLEY. PROJECTI NAME: 3000 LOCATION: Access Technologies SERIES DOOR NUMBER(S): DATE: SHEET: OF PACKAGE WIDTH ELECTRICAL /4" SHIM SPACE ELECTRIC SOLENOID LOCK COMBINED ACTIVATION/, SAFETY SENSOR - - 6" [152] n ACCESS COVER "SO" "SX" "SX" "SO" INTERIOR B EXTERIOR FRAME WIDTH RECESSED - 4 1/2" [114] ELEVATION PANIC DEVICE 3 N SEE THRESHOLD d DETAILS PACKAGE WIDTH INTERIOR VERTICAL SECTION a - "sO" "SX" sx "SO" NOTES EXTERIOR 1. ELECTRICAL REQUIREMENTS: BY ELECTRICAL CONTRACTOR 120 VAC, 5 AMP MIN TO POWER OPERATOR CONTROL CIRCUIT FROM SECURE ACTIVATION TO OPERATOR 2. ROUGH OPENING SHALL PROVIDE 1/4"[6] SHIM SPACE ON SIDES AND TOP OF PACKAGE. CLEAR DOOR OPENING 3. LIMITS OF ACTIVATION AND SAFETY ZONES ARE FOR COMBINED- EMERGENCY REFERENCE ONLY; SEE ANSI/BHMA A156.10 FOR DETAILED ACTWATION/SAFEN BREAKOUT REQUIREMENTS. SENSOR EACH PLAN SIDELIGHT AND 4. SEE SPECIFICATIONS FOR ADDITIONAL INFORMATION. SIDE OF DOOR SLIDING DOOR RECESSED PANIC DEVICE7 1 3/4" [44] HEADER ABOVE INTERIOR "sX" "SX" 3 & EXTERIOR "sO" SO" TYPICAL PACKAGE DIMENSIONS (NARROW STILE) PACKAGE WIDTH 1/4" SHIM SPACE- NOMINAL ROUGH OPENING PACKAGE CLEAR DOOR PANEL EMERGENCY WIDTH DOOR NOMINAL BREAKOUT OPENING WIDTH NOM. WIDTH 2 HORIZONTAL SECTION 4 120" 48.3" 30.3" 105.5" 144" 60.3" 36.3" 129.5" 168" 72.3" 42.3" 153.5" REVISION: 03/04/2019 PAGE: 1.03.06 AUGUST, 2024 190/350/500 Standard Entrances 1 EC 97911-323 FEATURES Features 190 narrow stile has 2-1/8" (54) vertical stile, 2-1/4" (57.2) top and 3-7/8" (98.4) bottom rail 350 medium stile has 3-1/2" (88.9) vertical stile, 3-1/2" (88.9) top and 6-1/2" (165.1) bottom rail 500 wide stile has 5" (127) vertical stile, 5" (127) top and 6-1/2" (165.1) bottom rail Door is 1-3/4" (44.5) deep Dual moment welded corner construction Single or double acting Infills range from 1/4" (6.4) to 1" (25.4) Offset pivots, butt hinges, continuous geared hinge or center pivots MS locks or panic hardware Surface mounted or concealed closers Architects Classic push/pulls Adjustable astragal utilizing pile weathering with polymeric fin at meeting stiles Polymeric bulb weatherstripping in door frames Permanodice anodized finishes option Painted finishes in standard and custom choices Optional Features Panelinee exit device or Panelinee MEL exit device Wide variety of bottom rail and cross rail Product Applications 190 narrow stile - engineered for moderate traffic in applications such as offices and stores 350 medium stile - provides extra strength for schools, institutions and other high traffic applications 500 wide stile - creates a monumental visual statement for banks, libraries or buildings that experience heavy traffic conditions For specific product applications, consult your Kawneer representative. kawneer. com ADMA010EN KAWNEER 2 190/350/500 Standard Entrances AUGUST, 2024 BLANK PAGE EC 97911-323 KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 3 AUGUST, 2024 EC 97911-323 INDEX PICTORIAL VIEW 5 DOOR TYPESISECT. DIMENSIONS 6 CONSTRUCTION DETAILS 7,8 STANDARD ENTRANCE PACKAGES 10, 11 ENTRANCE OFFERINGS. 12, 13 APPLICATION CRITERIA.. 13 PUSH PULL HARDWARE 14 PANELINE-/PANELINE MEL EXIT DEVICE. 15, 16 AUTO SHOWROOM DOOR 17, 18 INTERMEDIATE RAILS 19 INFILL OPTIONS 19 ACCESSORIES 19 HANDICAP ACCESSIBLE ITEMS. 20 BOTTOM RAILS 21 THERMAL CHARTS 22-40 Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ) are millimeters unless otherwise noted. The following metric (SI ) units are found in these details: m- - meter cm centimeter mm - millimeter S- second Pa - pascal MPa megapascal kawneer. com ADMA010EN KAWNEER 4 190/350/500 Standard Entrances AUGUST, 2024 BLANK PAGE EC 97911-323 KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 5 AUGUST, 2024 EC 97911-323 PICTORIAL VIEW a a 6 G CRCO #1 MECHANICAL FASTENING is accomplished by attaching a 5/16" (7.9) thick extruded aluminum channel clip to the vertical stile with 1/4"-20 heat strengthened bolts and 3/16" thick steel nut plates for a high strength welding base for attachment horizontal member. #2 SIGMA* DEEP PENETRATION PLUG WELDS are made top and bottom after the horizontal is properly positioned over the channel clip to help provide the strongest door corner joint currently available. DUAL MOMENT WELDED CORNER CONSTRUCTION #3 SIGMA* FILLET WELDS along both top and An arc welding process known as Shielded Inert Gas Metal Arc (SIGMA) bottom webs of the rail extrusion complete the or also known as Metal Inert Gas (MIG). welded corner construction. kawn eer com ADMA010EN KAWNEER 6 190/350/500 Standard Entrances AUGUST, 2024 DOOR TYPESISECTION DIMENSIONS EC 97911-323 Additional information and CAD details are available at www.kawneer.com 190 NARROW STILE 350 MEDIUM STILE 500 WIDE STILE 1 1 1 STANDARD STANDARD LOCATIONS LOCATIONS TOP TOP STANDARD ATTACHMENT ATTACHMENT EXIT DEVICE £ £ OF CYL. EXITL LOCK - CYLINDER 3 3 3 o 2 2 2 BOTTOM BOTTOM OF DOOR OF DOOR N 1 S 1 0 1 1-23/32" (43.8) TYPICAL 2 sy - 2 a - C B B 2 3 3 SINGLE ACTING SINGLE ACTING SINGLE ACTING 2-1/8" 3-1/2" 5" (54.0) (88.9) (127.0) 3 3 3 DOUBLE ACTING DOUBLE ACTING DOUBLE ACTING KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 7 AUGUST, 2024 EC 97911-323 CONSTRUCTION DETAILS Additional information and CAD details are available at www.kawneer.com NOTE: 1. SERIES 190 NARROW STILE DOORS. ARE DETAILED, MEDIUM STILE 350 DOORS. AND' WIDE STILE 500 DOORS. ALSO MAY BE USED. 2. TRIFABO VERSAGLAZE 450 CENTER, 1-3/4" X 4-1/2" (44.5 X 114.3) FRAMING IS DETAILED WITH THE DOORS FOR REFERENCE. OTHER KAWNEER FRAMING SERIES OR CURTAIN WALL SYSTEMS MAY BE USED. REFER TO THE CATALOG INDEX FOR THE. APPROPRIATE DETAIL SECTION. 9 9 7 7 6 10 6 10 2 3 4 5 1 2 -3 4 5 8 8 8 8 450019 450019 2 1 PAIR OF DOUBLE ACTING DOORS 3 450501 450501 2 1 PAIR OF SINGLE ACTING DOORS 3 450019 450019 450501 450501 4 5 4 5 DOUBLE ACTING DOOR SINGLE ACTING DOOR 450033 INSERT 6 <a awneer. com ADMA010EN KAWNEER 8 190/350/500 Standard Entrances AUGUST, 2024 CONSTRUCTION DETAILS EC 97911-323 Additional information and CAD details are available at www.kawneer.com DOUBLE ACTING DOORS 450012 9 450022 GLASS STOPS 450081 450081 450500 450500 TRAY TRAY 10 7 8 8 8 OPTIONAL OPTIONAL OPTIONAL BOTTOM RAIL BOTTOMI RAIL BOTTOMI RAIL WEATHERING WEATHERING WEATHERING 069143 069141 069143 OVERHEAD CLOSER FLOOR CLOSER OVERHEAD CLOSER - SINGLE ACTING DOORS COC WITH SINGLE 450012 450012 ACTING OFFSET ARM db - Cn 9 9 450022 450022 GLASS STOPS GLASS STOPS 450502 450502 450079 450079 . D 10 7 041045 041045 10 7 8 8 8 8 OPTIONAL OPTIONAL OPTIONAL OPTIONAL BOTTOM RAIL BOTTOM RAIL BOTTOMI RAIL BOTTOM RAIL WEATHERING WEATHERING WEATHERING WEATHERING 069139 069139 069139 069139 OVERHEAD CLOSER OVERHEAD CLOSER OVERHEAD CLOSER OVERHEAD CLOSER KAWNEER ADMA010EN kawneer. com AUGUST, 2024 190/350/500 Standard Entrances EC 97911-323 BLANK PAGE LEFT BLANK INTENTIONALLY kawneer. com ADMA010EN KAWNEER 10 190/350/500 Standard Entrances AUGUST, 2024 STANDARD ENTRANCE PACKAGES EC 97911-323 Additional information and CAD details are available at www.kawneer.com Trifabe VersaGlaze" 450 center door frames shown, Trifabe VersaGlazee 451 center door frames similar. DIMENSIONS ARE NOMINAL SINGLE ACTING DOORS 3/32" 1/8" 9 9 3/32" 17 (2.4) (3.2) (2.4) DOOR OPENING WIDTH( (DOW) 3/8" OVERALL FRAME WIDTH( (OFW) 3/8" (9.5) 17 (9.5) MASONRY OPENING WIDTH (MOW) TRANSOM JAMBS 3/8" OVERALLI FRAME WIDTH (OFW) 3/8" (9.5) (9.5) MASONRY OPENING WIDTH (MOW) 1-3/4" 1-3/4" (44.5) FRAME SIGHTLINE (FSL) FRAME SIGHTLINE (FSL) (44.5) CONTINUOUS HINGE JAMB o 5/16" - 92 + 3/32" (7.9) (2.4) DOOR OPENING) WIDTH (DOW) 3/8" OVERALLI FRAME WIDTH (OFW) 3/8" (9.5) (9.5) MASONRY OPENING WIDTH( (MOW) STANDARD SIZES (TRIFABO 400 & TRIFABB VG 450 CENTERI FRAMES) WITH AND WITHOUT TRANSOM Door Opening Dimension (DOW) Overall Frame Dimension (OFW) Masonry Opening Dimension (MOW) 3'0 0" (914) 3'3-1/2" (1,003) 3'4-1/4" (1,022) 3'6" (1,067) 3' 9-1/2" (1,156) 3'1 10-1/4" (1,175) 6'0" (1,829) 6'3-3/4" (1,924) 6'4-1/4" (1,937) STANDARD SIZES (TRIFAB9 VG 451 CENTERI FRAMES) WITH AND WITHOUT TRANSOM Door Opening Dimension (DOW) Overall Frame Dimension (OFW) Masonry Opening Dimension (MOW) 3' O" (914) 3'4" (1,016) 3' 4-3/4" (1,035) 3'6 6" (1,067) 3'1 10" (1,168) 3' 10-3/4" (1,187) 6'0" (1,829) 6'4" (1,930) 6'4 4-3/4" (1,949) WITH AND WITHOUT TRANSOM OFW = DOW + 2 FSL MOW = OFW + 3/4" Note: Dimensions shown above reflect A1 Price Book standard stock door frame height with transom at 10' 3-1/2" (3,137). KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 11 AUGUST, 2024 EC 97911-323 STANDARD ENTRANCE PACKAGES Additional information and CAD details are available at www.kawneer.com B E 450022 GLASS STOPS a 2 I e a I 92 l? a ITT FTTT STANDARD SIZES (TRIFAB°. 400 & TRIFAB9 VG 450 CENTER FRAMES) WITHOUT TRANSOM Door Opening Dimension (DOH) Overall Frame Dimension (OFH) Masonry Opening Dimension (MOH) 7'0" (2,134) 7' 1-3/4" (2,178) 7' 2-1/8" (2,188) 7'0" (2,134) 7' 1-3/4" (2,178) 7' 2-1/8" (2,188) 7'0 O" (2,134) 7' 1-3/4" (2,178) 7' 2-1/8" (2,188) STANDARD SIZES (TRIFAB VG 451 CENTER FRAMES) WITHOUT TRANSOM Door Opening Dimension (DOH) Overall Frame Dimension (OFH) Masonry Opening Dimension (MOH) 7'0" (2,134) 7'2" (2,184) 7' 2-3/8" (2,194) 7'0" (2,134) 7'2" (2,184) 7 2-3/8" (2,194) 7'0" (2,134) 7'2" (2,184) 7 2-3/8" (2,194) WITHOUT TRANSOM OFH = DOH + FSL MOH: - OFH + 3/8" WITH TRANSOM OFH = DOH +TH MOH = OFH + 3/8" Note: Dimensions shown above reflect/ A1 Price Book standard stock door frame height with transom at 10' 3-1/2" (3,137). <a er com ADMA010EN KAWNEER 12 190/350/500 Standard Entrances AUGUST, 2024 ENTRANCE OFFERINGS EC 97911-323 STANDARD OPTIONAL Doors Narrow stile 190 doors prepared for attachment hardware. Medium stile 350 or wide stile 500. Door Sizes Std. Standard sizes shown on pages 10 and 11. Any size upt to 4' O"x 8' 0" (1,219) x 2,438). Glass Stops Beveled glass stops for 1/4" (6.4) or 3/16" (4.0) infill. Square glass stops for 3/16" (4.0) or 1/4" (6.4) infill. Also 1" (25.4) stops. Door Frames Trifab" 400 - 1-3/4" X4 4" (44.5 x 101.6) for single glazing. Anyl Kawneeri framing systems suitable for doori frames may! bes selected, Trifabe VG 450 Center 1-3/4", X 4-1/2" (44.5 x 114.3) for single but manufactured per order. glazing or Trifabe VG 451 Center 2" X 4-1/2" (50.8 x 114.3) for double glazing. Push-Pulls Single Acting: Architects Classic Hardware CO-9 Pull and Single Acting: Architects Classic Hardware CP-II Push Bar. CO-12 and CP-II push bar. Architects Classic Hardware CO-9 Pull and CP Architects Classic Hardware Push Bar. CO-12 and CP push bar. Architects Classic Hardware CO-9/CO-9 Pulls. Architects Classic Hardware CO-12/CO-12 Pulls. Double Acting: Architects Classic Hardware CP Push Bars. Double. Acting: Architects Classic Hardware CO-9/CO-9 Pulls. Architects Classic Hardware CO-12/CO-12 Pulls. Door Closers Single. Acting: Norton 1601 adjustable or 1601 BF adjustable Single. Acting: LCN4 4040 surface closer with or without surface closer with back-check: and with or adjustable hold-open. without adjustable hold-open. LCN 2030 or 5010 concealed overhead closers Standard concealed overhead closer with with or without hold-open. single acting offset arm. LCN 1260 adjustable surface closer. Norton 8100 surface closer with a 50% spring power adjustment (for opening forces of less than 8 pounds). Closer is available with standard back-checks and with or without the hold-open feature. International single acting concealed overhead closer. Falcon SC 60 Surface closer. Double. Acting: Standard concealed overhead closer with 90 Double Acting: International overhead concealed closer. degree or 105 degree hold-open or without hold open. For heavy traffic & high wind applications, a supplemental door stop is recommended. Hinging Single Acting: Kawneer top and bottom offset pivots (or) Kawneer top and bottom 4 1/2" x 4" (114.3 x 101.6) ball bearing butt hinge with non- removable pin (NRP) (or) Kawneer continuous gear hinge. Double Acting: Kawneer bottom center pivots for use with Double Acting: Kawneer top center (walking beam) pivot for concealed overhead closer. use with floor closers. Intermediate Single Acting: Kawneer intermediate offset pivot (or) Kawneer Single. Acting: Rixson M-19 or IVES #7215-INT intermediate Pivots/Butts 4-1/2" x 4" (114.3 x 101.6) ball bearing butt offset pivot. hinge with non-removable pin (NRP). Power Transfers Single Acting: Kawneer ELI intermediate offset pivot (or) Kawneer EL 4 1/2" X 4" (114.3 X 101.6) ball bearing butt hinge with wire transfer (or) EPT (Electric Power Transfer). Power Supply SP-1000X Power Supply: For use with Panelinee EL exit devices. NP1 Power Supply: For use with Kawneer 1686 MEL and For use with Falcon EL 1690 and EL 1790 exit devices. 1786 MEL exit devices only. SP-2000 Power Supply: For use with Panelinee MEL exit devices. Locks Adams-Rite MS 1850A deadlock with two 1-5/32" (29.4) diameter 5 Adams-Rite #4510 latch lock. Active Leaf pin cylinders. Adams-Rite #1850A-500 short throw deadlock. Adams-Rite #1850A-505 hookbolt lock. Adams-Rite #40151 two-point Lock. Adams-Rite #4085 three-point Lock. Adams-Rite #4089 exit indicator. Kawneer cylinder guard. Kawneer thumbturn (in lieu of cylinder). KAWNEER ADMA010EN kaw com 190/350/500 Standard Entrances 13 AUGUST, 2024 EC 97911-323 ENTRANCE OFFERINGS/APPLICATION CRITERIA STANDARD OPTIONAL Locks - One pair of Kawneer flush bolts in the Controller" is a 3-point locking system consisting ofa a two point locking device in the Inactive Leaf inactive leaf of aj pair of doors. inactive leaf in lieu oft flush bolts, working in conjunction with the MS 1850A deadlock in the active leaf. This combination provides for greater security than possible with flush bolts and complies with the life safety considerations of building codes which prohibit the use of flush bolts. Thresholds A 1/2" X 4" (12.7 x 101.6) aluminum mill A1 1/2" x 6-3/4" (12.7 X 171.5) aluminum mill finish threshold. finish threshold. Weathering Single Weathering system in the door Bottom Door Sweep Acting: andi frame consisting of a dense, bulb polymeric material, which remains resilient and retains its weathering ability under temperature extremes. (The system is complete with an optional EPDM blade gasket sweep strip applied tot the bottom door rail with concealed fasteners). Double Pile cloth weathering in the door Acting: and frame. Exit Device Kawneer 1686 Concealed Rod Exit Device Kawneer 1686 MEL Concealed Rod Exit Device electric modification is available. with or without a mortised type cylinder. Kawneer 1786 MEL Rim Exit Device electric modification is available. Kawneer 1686 CD Concealed Rod Exit Device available with cylinder dogging. Kawneer 1786 Rim Exit Device is a rim Kawneer 1786 CD Rim Exit Device available with cylinder dogging. type exit device with or without a rim type Kawneer 1686 Lever Handle is available for the Kawneer 1686 concealed rod exit device. cylinder. Pairs ofo doors require a Kawneer RM-86 removable mullion. Kawneer 1786 Lever Handle is available for the Kawneer 1786 rim type exit device. Falcon 1690 Concealed Rod Exit Device with or without a mortised type cylinder. Paneline" exit device is a concealed rod exit Falcon 1790 Rim Exit Device is a rim type exit device with or without a rim type cylinder. device applicable to single or pairs of doors. Falcon EL 1690 electric modification is also available. It features an activating panel contained Falcon EL 1790 electric modification is also available within the door cross rail. Panelinee MEL electric modification is also available. Falcon 1990 is a concealed rod exit device with or without a rim type cylinder. Falcon 2090 is a rim type exit device with or without a rim type cylinder. Pairs of doors require a removable aluminum mullion. RM-70 with the Falcon 2090 exit device. Exit Device Pulls: Optional Exit Device Pulls: Architects Classic CO-9 Pull with Kawneer Architects Classic CO-12 Pull with Kawneer 1686 and 1786 exit devices. 1686 and 1786 exit devices. Architects Classic CPN Pull for Panelinee and Paneline MEL exit devices. APPLICATION CRITERIA As indicated on Page 10, the standard sizes of swing doors are 3' O"x x7' O" (914.4 x: 2,133.6) or 3'6 6" x 7' O" (1,067 x 2,1 134) for single doors and 6' O"x7' O" (1,828.8: X 2,133.6) for pairs of doors. When these sizes are exceeded the following criteria should be administered. 1. Larger doors should not be subject to heavy traffic or strong prevailing wind conditions. 2. Larger doors should use a door closer with a good back check action. METERS 3. When a 190 door exceeds 9' O" (2,743) or a 350/500 door 5 1 1.5 A: = NARROW STILE 190 exceeds 10' O" (3048) in height, a cross rail or push bar - T 3.5 should be used to reinforce the vertical stiles. 11 B: = MEDIUM STILE 350 OR 4. When an offset hung door exceeds 7' 6" (2,286.0) in 10 3 2 WIDE STILE 500 height, an intermediate butt or offset pivot should be used. E 9 B 5. Tall doors should be prevented from racking by proper 8 2.5: utilization of hardware, including door closers, door holders A and door stops. 7 MAXIMUM DOOR HEIGHT 2 FORI PANELINES MEL: = 8' 0" NOTE: 1 2 3 4 5 CONTACT YOUR FACTORY REPRESENTATIVE FEET FOR APPLICATION ASSISTANCE. MAXIMUM SIZE DOOR LEAFS GLAZED WITH 1/4" (6.4) GLASS <a awneer. com ADMA010EN KAWNEER 14 190/350/500 Standard Entrances AUGUST, 2024 PUSH-PULL HARDWARE EC 97911-323 REFER TO HARDWARE SECTION FOR COMPLETE HARDWARE INFORMATION. ARCHITECTS CLASSIC (PUSH PULL SETS) SINGLE. ACTING DOORS USE Al PULLI HANDLE. AND PUSH BARAS STANDARD DOUBLE ACTING DOORS USE CP PUSH BARS BACK TO BACKI AS STANDARD. 5 o CP-II/CP-I!" CPICP CO-9/CP CO-9/CP-II CO-9/CO-9 CO-12/CP CO-12 /CP-II CO-12/CO-12 ARCHITECTS CLASSIC (COMPONENTS) / I 12" 9" (304.8) (228.6) CO-9 PULL CO-12 PULL CP-I!* PUSH BAR CP PUSH BAR * CP-II PUSH BAR IS NOT TO BE USED FOR BACK TO BACK MOUNTING ON DIAI DOORS. EXIT DEVICES EXIT DEVICES AND PULLS KAWNEER PANELINE9/ PANELINE MEL 8 9" 12" - (304.8) (228.6) - s CO-9 PULL CO-12 PULL RIM LATCH CONCEALED ROD Falcon 2090 Falcon 1990 US LISTED CPN PULL ON EXTERIOR OF DOOR CONCEALED ROD RIM LATCH Falcon 1690 Falcon 1790 Falcon EL 1690 Falcon EL 1790 US LISTED 6 EXTERIOR VIEWO OF 190 DOOR (350/500 SIMILAR) CPN PULLAND OPTIONAL CYLINDER GUARD: SHOWN. CONCEALED ROD RIM LATCH LEVER HANDLE SEE PAGE 15 AND 16 FOR COMPLETE Kawneer 1686 Kawneer 1786 Kawneer 1686 PANELINES INFORMATION Kawneer 1686 MEL Kawneer 1786 MEL Kawneer 1786 Kawneer 1686 CD Kawneer 1786 CD KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 15 AUGUST, 2024 EC 97911-323 PANELINEO / PANELINEO MEL EXIT DEVICE The Panelinee concealed rod exit device for 190, 350 and 500 doors will accommodate variations in stile width and door width as shown in the following illustrations. Sidelites adjacent to Panelinee equipped doors not requiring exit devices may be fitted with fixed panels as detailed below to match the general appearance of the Panelinee cross rail. US LISTED The Optional Panelinee MEL device is designed for electrified access control and is compatible with most key pad and card reader systems. See Hardware Section for complete description of Panelinee hardware, including finish of units. Panelinee uses mortise cylinder in lieu of the normal rim-type. Dummy Panelinee units are not for use with any type of lock. INTERIOR ELEVATIONS 1-23/32" 1-3/8" 17/32" NOTE: Sidelites must be stop glazed above and below rail. (43.8) (34.9) (13.5) SEE NOTE ni - 1 2 3* USH PUSH 2 3* SEE - NOTE 36-1/8" ACTIVE DOOR SIDELITE *VESTIBULE DOOR (917.6) (Without Exit Device or Lock) CROSSRAIL TOBOTTOM SIDELITE CROSSRAIL WITH EXIT DEVICE OF DOOR CROSSRAIL WITHI FIXED AND CPN PULLI HANDLE PANEL LOCK STILE TRIMI FILLER WDTH VARIES WITH: STILE WIDTH DOGGINGI LOCK (TYPICAL) PUSH PANELINEO MEL COMPONENTS 6-1/8" 190 DOOR e ( @ (155.6) DOOR OPENING) WDTH 40" (1,219.2)N MAX. - 2'9-9/32" (845.3)N MIN. 30" (914.6). ADAI MIN. o PIVOT STILE TRIMI FILLER WIDTH VARIES WITHI DOOR' WDTH POWER TRANSFER POWER TRANSFER INTERMEDIATE BUTT HINGE INTERMEDIATE OFFSETI PIVOT PUSH o 350 DOOR 5-7/8" (149.2) DOOR OPENING WDTH $8 4' 0" (1,219.2) MAX. 2 10-13/32" (873.9) MIN. 30"( (914.6). ADAI MIN. s PUSH a - a $ 5-7/8" 500 DOOR (149.2) DOOR OPENING WIDTH ELECTRIC POWER TRANSFER SP-2000 POWER SUPPLY 4'0" (1,219.2) MAX. 2'11-29/32" (912.0) MIN. (EPT) 30" (914.6) ADAI MIN. kawneer. com ADMA010EN KAWNEER 16 190/350/500 Standard Entrances AUGUST, 2024 PANELINEO EXIT DEVICE EC 97911-323 Sidelites adjacent to Panelinee equipped doors not requiring exit devices may be fitted with fixed panels as detailed below to match the general appearance of the Paneline cross rail. See Hardware Section for complete description of Panelinee hardware, including finish of units. Paneline uses mortise cylinder in lieu of the normal rim-type. Dummy Panelinee units should not use any type of lock. 1-23/32" 1-3/8" 17/32" (43.8) (34.9) (13.5) INTERIOR ELEVATION NOTE: Sidelites must be stop glazed above and below rail. - I SEEI NOTE n : US LISTED 1 2 3* L1 or 3* L1 or 3* 2 w SEE NOTE a 36-1/8" INACTIVE DOOR ACTIVE DOOR SIDELITE CROSS RAIL E TOBTM (917.6) SIDELITE CROSS RAIL * ALTERNATE CROSSRAIL FOR VESTIBULE DOORS WITHE EXIT DEVICE OF DOOR CROSS RAIL WITH AND PULL (FIXEDL LOCATION) FIXEDI PANEL (Without Exit Device or Lock) OCK: STILE TRIMFILLER WIDTH VARIES WTH: STILE' WIDTH DOGGINGI LOCK PUSH PUSH * (TYPICAL) 190 DOOR DOOR OPENING WIDTH 80" (2438.4) MAX. -5'7-1/4" (1,708.2)N MIN. 6' O" (1,828.8) ADAI MIN. PIVOT STILE TRIMI FILLERI WIDTH CPNI PULL ON VARIES WITH DOORI WDTH EXTERIOR OF DOOR E PUSH PUSH 350 DOOR 4 DOOR OPENINGI WIDTH 80"( (2,438.4) MAX. -5' 9-5/16" (1,761.0) MIN. 60"( (1,828.8) ADAI MIN. EXTERIOR VIEW OF 190 DOOR (350-500 SIMILAR) WITH CPN PULL AND STANDARD CYLINDER GUARD SHOWN PUSH PUSH 500 DOOR DOOR OPENING WIDTH 80" (2,438.4) MAX. -6'0" (1, 828.8) MIN. 60"( (1,828.8) ADAI MIN. KAWNEER ADMA010EN kawne er com 190/350/500 Standard Entrances 17 AUGUST, 2024 EC 97911-323 AUTO SHOWROOM DOOR NOTE: 1/4" GLAZING INFILL ONLY SWING TYPE BIFOLDTYPE 8' 3-1/2" (2,527.3) 9'3 3-1/2" (2,832.1) FRAME WIDTH FRAME WIDTH 3'6 6"x7 O" 4'6x70" 3' 0"X7' 0" 3' O"x7 O" 3'0 0"x7 O" 8' O" (2,438.4) 9' 0" (2,734.2) DOOR OPENING DOOR OPENING MAXIMUM ALLOWABLE SIZES . DOOR OPENING WIDTH TO 9' 0" (2,743.2) [SWING] OR 10' 0" (3,048) [BI-FOLD] DOOR OPENING HEIGHT TO 8' O" (2,438.4) OVERALL FRAME HEIGHT TO 8' 1-3/4" (2,482.9) WIO TRANSOM OVERALL FRAME HEIGHT TO 12' 0" (3,657.6) WITH TRANSOM AUTO SHOWROOM PACKAGE DOORS 190 NARROW STILE, 350 MEDIUM STILE. AND 500 WIDE STILE DOORS. FRAME. TRIFAB9 VERSAGLAZE, 450 CENTER. CLOSER.. NORTON 1601 ADJUSTABLE OR 1601 BF ADJUSTABLE SURFACE CLOSER (ACTIVE LEAF ONLY). BUTT HINGES ONE PAIR 4-1/2" X 4" (114.3, X 101.6) BALL BEARING BUTTS ON ACTIVE LEAF, ONE AND ONE HALF PAIR ON INACTIVE LEAVES. AT HINGE JAMB. CONTINUOUS HINGE ON INACTIVE LEAVES. LOCKS. ADAMS-RITE MS1850A WITH (2) CYLINDERS ON ACTIVE LEAF. FLUSHBOLTS. ONE PAIR EDGE MOUNTED FOR INACTIVE LEAVES (FACE MOUNTED ON #2 INACTIVE LEAF OF BIFOLD TYPE). THRESHOLD. 1/2" X 4" (12.7 X 101.6) ALUMINUM. RISER BLOCK. EXTRUDED, ALUMINUM BLOCK. APPLIED TO BOTTOM RAIL OF EACH INACTIVE LEAF. OPTIONAL CASTER. IN LIEU OF RISER BLOCK, FACE APPLIED CASTER TO LEADING STILE OF INACTIVE LEAF. kawn neer com ADMA010EN KAWNEER 18 190/350/500 Standard Entrances AUGUST, 2024 AUTO SHOWROOM DOOR EC 97911-323 Additional information and CAD details are available at www.kawneer.com OVERALL FRAME DOOR OPENING 450501 450501 SWING TYPE OVERALL FRAME DOOR OPENING 450501 450501 BIFOLDTYPE 450501 OPTIONAL CONTINUOUS HINGE JAMB KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 19 AUGUST, 2024 EC 97911-323 INTERMEDIATE RAILS, INFILL OPTIONS AND ACCESSORIES Additional information and CAD details are available at www.kawneer.com HORIZONTAL I VERTICAL CROSS RAILS CROSS RAIL (Optional) . - 200055 s E 0. 5 € 200056 d 8 200054 o e 3 8 200057 I INFILL 200058 3/16" (4.3) & 1/4" (6.4) BEVEL SQUARE GLASS GLASS 200059 STOPS STOPS 200053 * n - - - - U STANDARD OPTIONAL 200039 with: 249235 INFILL OPTIONS 5/16" (7.9) & 3/8" (9.5) 7/16" (11.1) & 1/2" (12.7) 9/16" (14.3) & 5/8" (15.9) 11/16" (17.5) & 3/4"( (19.0) 15/16" (23.8) & 1" (25.4) ACCESSORY ITEMS THRESHOLDS APPLICATION 5 069139 ay 1/2" 1 FOR SINGLE ACTING DOOR 069177 T(12.7) (25.4 5 4) 4" APPLIED a 4 - 038365 (101.6) DOOR 6 FINGER STOP PROTECTOR 7 069143 - FOR CENTER HUNG CONCEALED CLOSER 4" (101.6) l6 & APPLIED STOP FOR 039345 SINGLE. ACTING DOOR 06915 54 (12.7) 1/4 APPLIED DOOR OPTIONAL STOP BOTTOMI RAIL CENTER HUNG 069141 s WEATHERING FOR FLOOR CLOSERS 6-3/4" (171.5) - *SOMEE BUILDING CODES LIMIT F - OLD HEIGHT TO1 1/2" (12.7) MAX. kawneer. com ADMA010EN KAWNEER 20 190/350/500 Standard Entrances AUGUST, 2024 HANDICAP ACCESSIBLE ITEMS EC 97911-323 PUSH-PULLS - - PUSt Description Architects Classic CO-12 Pull BF3 Push Shield with symbol Application Door with or without Door cross rail exit device (omit w/exit device) Length/Size 12" OC Pull attachment 15-7/8" x7-7/8" (403.2 X 200.0) 1/8" (3.2) Thick Height Location 44-5/16" from Top Mounting Hole to Btm. of Door Total Projection 3-1/4" (82.6) 1/8" (3.2) Material / Finish See Hardware Section Black Plastic Pebble Finish Note: The symbol of access is an adhesive backed decal applied to the surface of the optional cross rail. Letters and symbols on plastic push shield are engraved and filled with white epoxy enamel. KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 21 AUGUST, 2024 EC 97911-323 BOTTOM RAILS Additional information and CAD details are available at www.kawneer.com STANDARD BOTTOM RAILS Rail heights shown may be used on 190, 350, and 500 doors. NOTE: See Page 19 for available Horizontal Intermediate Members. 350 500 190 OPTIONAL BOTTOM RAILS Rail heights shown may be used on 190, 350, and 500 doors. Custom heights available. 4 5 y I - I o e e S CV e kawneer. com ADMA010EN KAWNEER 22 190/350/500 Standard Entrances AUGUST, 2024 THERMAL CHARTS EC 97911-323 Generic Project Specific U-factor Example Calculation (Percent of Glass will vary on specific products depending on sitelines) 31.562" . (801.7) (D.L.O.) 3' 3-1/2" (1,003.3) (F.W.) Example Glass U-Factor = 0.28 Btu/hr . ft2 . °F Total Daylight Opening = 31.562" x 77.062" = 16.89 ft2 Total Projected Area = 3' 3-1/2 x 7' 1-3/4" = 23.52 ft2 Percent of Glass = (Total Daylight Opening + Total Projected Area)100 = (16.89 + 23.52)100 = 72% System U-factor Vs Percent of Glass Area 0.90 0.85 0.80 E0.75 - E0.70 o t 0.65 - - : - : . COG : - : 0.60 U-factor . - 0.48 (2.73) - - . - - : : : 0.55 E 0.46 (2.61) - - : - . - : a 0.44 (2.50) : . - : - : - : - : : 0.42 (2.39) : 0.50 0.40 0.38 (2.16) (2.27) . : - - : 0.36 (2.05) : 1 . 04:46 0.34 (1.93) - - 0.32 (1.82) : 0.30 (1.71) - - . 0.40 0.28 0.26 (1.48) (1.59) - - : : 0.24 (1.37) : 1 £0.35 0.22 (1.25) * 0.20 (1.14) E0.30 E0.25 F0.20 85 80 75 I 70 65 60 Percent of Glass Area & Based on 72% glass and center of glass (COG) U-factor of 0.28 System U-factor is equal to 0.46 Btu/hr . ft2 . F KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 23 AUGUST, 2024 EC 97911-323 THERMAL CHARTS 190 (SINGLE DOOR) System U-factor Vs Percent of Glass Area 0.90 0.85 0.80 0.75 0.70 COG N. U-factor 0,48 (2.73) 0.65 0.46 (2.61) 0.44 (2.50) 0.42 (2.39) 0,40(2.27) 0.60 0.38 (2.16) 0.36 (2.05) 0,34(1.93) 0,32(1.82) 0.55 0.30(1.71) 0,28(1.59) 0.26(1.48) 0.50 0.24(1.37) 0.22(1.25) 0.20(1.14) 0.18(1.02) 0.45 0.16(0.91) 0,14(0,80) 0.12( (0.68) 0.40 0.10 (0.57) 0.35 0.30 75 70 65 60 55 50 Percent of Glass = Vision Area/Total Area (Total Daylight Opening / Projected Area) Notes for System U-Factor, SHGC and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are based on center of glass values (winter conditions) and are obtained from your glass supplier. kawneer. com ADMA010EN KAWNEER 24 190/350/500 Standard Entrances AUGUST, 2024 THERMAL CHARTS EC 97911-323 190 (SINGLE DOOR) System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area 0.75 0.70 COG SHGC 0.65 0.60 0.75 0.70 0.55 0.65 0.50 0.60 0.55 0.45 0.50 - 0.40 0.45 0.35 0.40 0.35 0.30 0.30 0.25 0.25 0.20 0.20 0.15 0.15 0.10 0.10 0.05 0.05 0.00 75 70 65 60 55 50 Vision Area / Total Area (%) System Visible Transmittance (VT) Vs Percent of Vision Area 0.75 0.70 COG 0.65 VT 0.60 0.75 0.55 0.70 0.65 0.50 0.60 0.45 5 0.55 0.40 = 0.50 0.45 0.35 0.40 0.30 0.35 0.25 0.30 0.25 0.20 0.20 0.15 0.15 0.10 0.10 0.05 0.05 0.00 75 70 65 60 55 50 Vision Area I Total Area (%) KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 25 AUGUST, 2024 EC 97911-323 THERMAL PERFORMANCE MATRIX (NFRC SIZE) Thermal Transmittance 1 (BTU/hr ft 2 . °F) 190 (SINGLE DOOR) Glass U-Factor 3 Overall U-Factor 4 0.48 0.78 0.46 0.77 0.44 0.76 0.42 0.75 0.40 0.74 0.38 0.73 NOTE: For glass values that are not listed, linear interpolation is permitted. 0.36 0.72 0.34 0.71 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with 0.32 0.70 NFRC 200. 0.30 0.69 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 0.28 0.68 4. Overall U-Factor, SHGC, and VT Matricies are based on 0.26 0.67 the standard NFRC specimen size of 960 mm wide by 0.24 0.66 2,090 mm high (37-3/4" by 82-3/8"). 0.22 0.65 0.20 0.65 0.18 0.63 0.16 0.61 0.14 0.60 0.12 0.59 0.10 0.58 SHGC Matrix 2 Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4 0.75 0.48 0.75 0.44 0.70 0.45 0.70 0.41 0.65 0.42 0.65 0.38 0.60 0.39 0.60 0.35 0.55 0.36 0.55 0.32 0.50 0.33 0.50 0.29 0.45 0.30 0.45 0.26 0.40 0.27 0.40 0.23 0.35 0.24 0.35 0.21 0.30 0.21 0.30 0.18 0.25 0.18 0.25 0.15 0.20 0.15 0.20 0.12 0.15 0.13 0.15 0.09 0.10 0.10 0.10 0.06 0.05 0.07 0.05 0.03 kawneer. com ADMA010EN KAWNEER 26 190/350/500 Standard Entrances AUGUST, 2024 THERMAL CHARTS EC 97911-323 190 (PAIR OF DOORS) System U-factor VS Percent of Glass Area 0.90 0.85 0.80 0.75 0.70 o COG si U-factor 0.65 0,47 (2.67) 0.46 (2.61) 0.44 (2.50) 0.42 (2.39) 0.60 0.40 (2.27) 0.38 (2.16) 0.36 (2.05) 0,34 (1.93) 0.55 0.32 (1.82) 0.30(1.71) 0.28 (1.59) 0.26 (1.48) 0.50 0.24 (1.37) 0,22 (1.25) 0.20(1.14) 0.45 0.18 (1.02) 0,16 (0.91) 0.14 (0.80) 0.12 (0.68) 0.40 0.10( (0.57) 0.35 0.30 75 70 65 60 55 50 Percent of Glass = Vision Area/Total Area (Total Daylight Opening / Projected Area) Notes for System U-Factor, SHGC and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are based on center of glass values (winter conditions) and are obtained from your glass supplier. KAWNEER ADMA010EN kawne e er com 190/350/500 Standard Entrances 27 AUGUST, 2024 EC 97911-323 THERMAL CHARTS 190 (PAIR OF DOORS) System Solar Heat Gain Coefficient (SHGC) Vs Percent of Vision Area 0.75 0.70 COG SHGC 0.65 0.75 0.60 0.70 0.55 0.65 0.50 0.60 0.45 0.55 0.50 0.40 0.45 0.35 0.40 - 0.35 0.30 0.30 0.25 0.25 0.20 0.20 0.15 0.15 0.10 0.10 0.05 0.05 0.00 75 70 65 60 55 50 Vision Area / Total Area (%) System Visible Transmittance (VT) VS Percent of Vision Area 0.75 0.70 COG 0.65 VT 0.60 0.75 0.55 0.70 0.65 0.50 0.60 0.45 0.55 0.40 0.50 E 0.45 0.35 @ 0.40 : 0.30 S 0.35 : : - 0.25 0.30 -- : 0.25 0.20 0.20 : 0.15 0.15 :---- 0.10 0.10 0.05 0.05 0.00 75 70 65 60 55 50 Vision Area I Total Area (%) <a awneer. com ADMA010EN KAWNEER 28 190/350/500 Standard Entrances AUGUST, 2024 THERMAL PERFORMANCE MATRIX (NFRC SIZE) EC 97911-323 Thermal Transmittance 1 (BTU/hr . ft 2 .F) 190 (PAIR OF DOORS) Glass U-Factor 3 Overall U-Factor 4 0.47 0.73 0.46 0.72 0.44 0.71 0.42 0.70 0.40 0.69 0.38 0.68 NOTE: For glass values that are not listed, linear interpolation is permitted. 0.36 0.67 0.34 0.66 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with 0.32 0.64 NFRC 200. 0.30 0.63 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 0.28 0.62 4. Overall U-Factor, SHGC, and VT Matricies are based on 0.26 0.61 the standard NFRC specimen size of 1,920 mm wide by 0.24 0.60 2,090 mm high (75-1/2" by 82-3/8"). 0.22 0.59 0.20 0.58 0.18 0.56 0.16 0.55 0.14 0.54 0.12 0.53 0.10 0.52 SHGC Matrix 2 Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT3 Overall VT 4 0.75 0.50 0.75 0.47 0.70 0.47 0.70 0.44 0.65 0.44 0.65 0.41 0.60 0.41 0.60 0.38 0.55 0.38 0.55 0.35 0.50 0.35 0.50 0.31 0.45 0.31 0.45 0.28 0.40 0.28 0.40 0.25 0.35 0.25 0.35 0.22 0.30 0.22 0.30 0.19 0.25 0.19 0.25 0.16 0.20 0.16 0.20 0.13 0.15 0.13 0.15 0.09 0.10 0.09 0.10 0.06 0.05 0.06 0.05 0.03 KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 29 AUGUST, 2024 EC 97911-323 THERMAL CHARTS 350 (SINGLE DOOR) System U-factor VS Percent of Glass Area 1.00 0.95 - 0.90 - - - 0.85 - - 0.80 COG 0.75 U-factor 0,48(2,73) 0.46(2.61) 0.44( (2.50) 0.42 (2.39) 0.70 0.40(2.27) 0.38(2.16) 0,36(2.05) 0.34(1.93) 0.65 0.32(1.82) 0.30(1.71) 0.28(1.59) 0.26(1.48) 0.60 0.24(1.37) 0.22(1.25) 0.20(1.14) 0.18(1.02) 0.55 0.16(0.91) 0.14( (0.80) 0.12(0.68) 0.10 (0.57) 0.50 0.45 0.40 65 60 55 50 45 40 Percent of Glass = Vision Area/Total Area (Total Daylight Opening / Projected Area) Notes for System U-Factor, SHGC and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are based on center of glass values (winter conditions) and are obtained from your glass supplier. kawneer. com ADMA010EN KAWNEER 30 190/350/500 Standard Entrances AUGUST, 2024 THERMAL CHARTS EC 97911-323 350 (SINGLE DOOR) System Solar Heat Gain Coefficient (SHGC) Vs Percent of Vision Area 0.75 0.70 0.65 COG 0.60 SHGC 0.55 0.75 0.70 0.50 0.65 0.45 0.60 0.55 0.40 0.50 : : : 0.35 0.45 : 0.40 - : 0.30 0.35 : 0.25 0.30 0.25 0.20 0.20 0.15 0.15 0.10 0.10 0.05 0.05 0.00 65 60 55 50 45 40 Vision Area / Total Area (%) System Visible Transmittance (VT) VS Percent of Vision Area 0.75 0.70 0.65 COG 0.60 VT 0.55 0.75 0.50 0.70 0.45 0.65 0.60 0.40 0.55 0.35 0.50 0.45 - : : - - 0.30 0.40 - - - : :- 0.25 0.35 : : : 0.30 : - 0.20 0.25 - : : 0.15 0.20 : - 0.15 - 0.10 0.10 0.05 - : 0.05 0.00 65 60 55 50 45 40 Vision Area / Total Area (%) KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 31 AUGUST, 2024 EC 97911-323 THERMAL PERFORMANCE MATRIX (NFRC SIZE) Thermal Transmittance 1 (BTU/hr ft 2 . °F) 350 (SINGLE DOOR) Glass U-Factor 3 Overall U-Factor 4 0.48 0.83 0.46 0.82 0.44 0.81 0.42 0.81 0.40 0.80 0.38 0.79 NOTE: For glass values that are not listed, linear interpolation is permitted. 0.36 0.78 0.34 0.77 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with 0.32 0.76 NFRC 200. 0.30 0.75 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 0.28 0.74 4. Overall U-Factor, SHGC, and VT Matricies are based on 0.26 0.73 the standard NFRC specimen size of 960 mm wide by 0.24 0.72 2,090 mm high (37-3/4" by 82-3/8"). 0.22 0.71 0.20 0.70 0.18 0.69 0.16 0.68 0.14 0.68 0.12 0.67 0.10 0.66 SHGC Matrix 2 Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4 0.75 0.43 0.75 0.39 0.70 0.41 0.70 0.36 0.65 0.38 0.65 0.34 0.60 0.36 0.60 0.31 0.55 0.33 0.55 0.29 0.50 0.30 0.50 0.26 0.45 0.28 0.45 0.23 0.40 0.25 0.40 0.21 0.35 0.23 0.35 0.18 0.30 0.20 0.30 0.16 0.25 0.17 0.25 0.13 0.20 0.15 0.20 0.10 0.15 0.12 0.15 0.08 0.10 0.10 0.10 0.05 0.05 0.07 0.05 0.03 kawneer. com ADMA010EN KAWNEER 32 190/350/500 Standard Entrances AUGUST, 2024 THERMAL CHARTS EC 97911-323 350 (PAIR OF DOORS) System U-factor VS Percent of Glass Area 1.00 0.95 0.90 - - - 0.85 0.80 - COG 0.75 U-factor 0.47 (2,67) 0.46 (2.61) 0.44 (2.50) 0.70 0.42 (2.39) 0.40(2.27) 0.38 (2.16) 0.36(2.05) 0.65 0.34(1.93) 0.32(1.82) 0.30(1.71) 0.28 (1.59) 0.60 0.26 (1.48) 0.24 (1.37) 0,22(1.25) 0.20(1.14) 0.55 0.18(1.02) 0.16 (0.91) 0.14( (0.80) 0.12 (0.68) 0.10 (0.57) 0.50 0.45 0.40 65 60 55 50 45 40 Percent of Glass = Vision Area/Total Area (Total Daylight Opening / Projected Area) Notes for System U-Factor, SHGC and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are based on center of glass values (winter conditions) and are obtained from your glass supplier. KAWNEER ADMA010EN kawne e er com 190/350/500 Standard Entrances 33 AUGUST, 2024 EC 97911-323 THERMAL CHARTS 350 (PAIR OF DOORS) System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area 0.75 0.70 0.65 COG 0.60 SHGC 0.55 0.75 0.50 0.70 0.65 0.45 0.60 0.55 0.40 0.50 - : 0.35 0.45 : ------ 0.30 0.40 : 0.35 - : 0.25 0.30 : - - 0.25 : - : - 0.20 0.20 : :---- : 0.15 0.15 0.10 ----------- ---------- - 0.10 0.05 0.05 0.00 65 60 55 50 45 40 Vision Area / Total Area (%) System Visible Transmittance (VT) Vs Percent of Vision Area 0.75 0.70 0.65 0.60 COG VT 0.55 0.75 0.50 0.70 0.45 0.65 0.60 0.40 m 0.55 0.35 0.50 : 0.45 : : - 0.30 0.40 : - -- 0.25 0.35 : : : - : - : : 0.30 : 0.20 0.25 :- 0.15 0.20 : :- 0.15 -:- : 0.10 0.10 - : --------- 0.05 0.05 0.00 65 60 55 50 45 40 Vision Area / Total Area (%) kawneer. com ADMA010EN KAWNEER 34 190/350/500 Standard Entrances AUGUST, 2024 THERMAL PERFORMANCE MATRIX (NFRC SIZE) EC 97911-323 Thermal Transmittance 1 (BTU/hr . ft 2 .F) 350 (PAIR OF DOORS) Glass U-Factor 3 Overall U-Factor 4 0.47 0.79 0.46 0.78 0.44 0.77 0.42 0.76 0.40 0.75 0.38 0.74 NOTE: For glass values that are not listed, linear interpolation is permitted. 0.36 0.73 0.34 0.72 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with 0.32 0.71 NFRC 200. 0.30 0.70 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 0.28 0.69 4. Overall U-Factor, SHGC, and VT Matricies are based on 0.26 0.68 the standard NFRC specimen size of 1,920 mm wide by 0.24 0.67 2,090 mm high (75-1/2" by 82-3/8"). 0.22 0.66 0.20 0.65 0.18 0.64 0.16 0.63 0.14 062 0.12 0.61 0.10 0.60 SHGC Matrix 2 Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT3 Overall VT 4 0.75 0.46 0.75 0.42 0.70 0.43 0.70 0.39 0.65 0.40 0.65 0.36 0.60 0.37 0.60 0.34 0.55 0.35 0.55 0.31 0.50 0.32 0.50 0.28 0.45 0.29 0.45 0.25 0.40 0.26 0.40 0.22 0.35 0.23 0.35 0.20 0.30 0.21 0.30 0.17 0.25 0.18 0.25 0.14 0.20 0.15 0.20 0.11 0.15 0.12 0.15 0.08 0.10 0.09 0.10 0.06 0.05 0.07 0.05 0.03 KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 35 AUGUST, 2024 EC 97911-323 THERMAL CHARTS 500 (SINGLE DOOR) System U-factor VS Percent of Glass Area 1.00 0.95 0.90 - - - - 0.85 - 0.80 > N COG 0.75 U-factor 0.48 (2.73) 0.46 (2.61) 0.70 0.44 (2.50) 0.42 (2.39) 0.40 (2.27) 0.38 (2.16) 0.36 (2.05) 0.65 0.34 (1.93) 0.32 (1.82) 0,30(1.71) 0,28(1.59) 0.60 0.26(1.48) 0.24(1.37) 0.22 (1.25) 0.20(1.14) 0.55 0.18 (1.02) 0.16 (0.91) 0.14 (0.80) 0.12 (0.68) 0.50 0.10 (0.57) 0.45 0.40 0.35 65 60 55 50 45 40 Percent of Glass = Vision Area/Total Area (Total Daylight Opening / Projected Area) Notes for System U-Factor, SHGC and' VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are based on center of glass values (winter conditions) and are obtained from your glass supplier. kawneer. com ADMA010EN KAWNEER 36 190/350/500 Standard Entrances AUGUST, 2024 THERMAL CHARTS EC 97911-323 500 (SINGLE DOOR) System Solar Heat Gain Coefficient (SHGC) Vs Percent of Vision Area 0.75 0.70 0.65 COG 0.60 SHGC 0.55 0.75 0.50 0.70 0.65 0.45 0.60 0.55 0.40 0.50 : 0.35 0.45 0.40 : : : 0.30 0.35 : : 0.25 0.30 0.25 0.20 0.15 0.20 : : - : : 0.15 0.10 0.10 0.05 0.05 0.00 65 60 55 50 45 40 Vision Area / Total Area (%) System Visible Transmittance (VT) VS Percent of Vision Area 0.75 0.70 0.65 0.60 COG 0.55 VT 0.75 0.50 0.70 0.45 0.65 0.60 0.40 = 0.55 0.35 0.50 0.45 --- : - - 0.30 0.40 - - 0.25 0.35 --- : 0.30 : : 0.20 0.25 - : 0.15 0.20 0.15 :- - 0.10 0.10 : - 0.05 0.05 0.00 65 60 55 50 45 40 Vision Area / Total Area (%) KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 37 AUGUST, 2024 EC 97911-323 THERMAL PERFORMANCE MATRIX (NFRC SIZE) Thermal Transmittance 1 (BTU/hr ft 2 . °F) 500 (SINGLE DOOR) Glass U-Factor 3 Overall U-Factor 4 0.48 0.87 0.46 0.86 0.44 0.85 0.42 0.84 0.40 0.84 0.38 0.83 NOTE: For glass values that are not listed, linear interpolation is permitted. 0.36 0.82 0.34 0.81 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with 0.32 0.81 NFRC 200. 0.30 0.80 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 0.28 0.79 4. Overall U-Factor, SHGC, and VT Matricies are based on 0.26 0.78 the standard NFRC specimen size of 960 mm wide by 0.24 0.77 2,090 mm high (37-3/4" by 82-3/8"). 0.22 0.77 0.20 0.76 0.18 0.75 0.16 0.74 0.14 0.73 0.12 0.73 0.10 0.72 SHGC Matrix 2 Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4 0.75 0.38 0.75 0.33 0.70 0.36 0.70 0.31 0.65 0.34 0.65 0.29 0.60 0.32 0.60 0.27 0.55 0.29 0.55 0.25 0.50 0.27 0.50 0.22 0.45 0.25 0.45 0.20 0.40 0.23 0.40 0.18 0.35 0.21 0.35 0.16 0.30 0.18 0.30 0.13 0.25 0.16 0.25 0.11 0.20 0.14 0.20 0.09 0.15 0.12 0.15 0.07 0.10 0.09 0.10 0.04 0.05 0.07 0.05 0.02 kawneer. com ADMA010EN KAWNEER 38 190/350/500 Standard Entrances AUGUST, 2024 THERMAL CHARTS EC 97911-323 500 (PAIR OF DOORS) System U-factor VS Percent of Glass Area 1.00 0.95 0.90 0.85 0.80 COG 0.75 U-factor 0.47(2.67) 0.46( (2.61) 0.70 0.44( (2.50) 0.42( (2.39) 0.40(2.27) 0.38(2.16) 0.65 0.36 (2.05) 0.34( (1.93) 0.32(1.82) 0.30(1.71) 0.60 0.28(1.59) 0.26(1.48) 0.24(1.37) 0.22(1.25) 0.55 0.20(1.14) 0,18(1.02) 0.16(0.91) 0.14(0.80) 0.12(0.68) 0.50 0.10(0.57) 0.45 0.40 65 60 55 50 45 40 Percent of Glass = Vision Area/Total Area (Total Daylight Opening I Projected Area) Notes for System U-Factor, SHGC and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are based on center of glass values (winter conditions) and are obtained from your glass supplier. KAWNEER ADMA010EN kawneer. com 190/350/500 Standard Entrances 39 AUGUST, 2024 EC 97911-323 THERMAL CHARTS 500 (PAIR OF DOORS) System Solar Heat Gain Coefficient (SHGC) Vs Percent of Vision Area 0.75 0.70 0.65 COG 0.60 SHGC 0.55 0.75 0.50 0.70 0.65 0.45 0.60 0.55 0.40 0.50 : 0.35 0.45 -- - 0.40 : -- 0.30 0.35 : 0.25 0.30 0.25 : - : 0.20 0.20 0.15 015 ---------- - 0.10 - - ----------- --------- : 0.10 0.05 0.05 0.00 65 60 55 50 45 40 Vision Area / Total Area (%) System Visible Transmittance (VT) vs Percent of Vision Area 0.75 0.70 0.65 0.60 COG VT 0.55 0.75 0.50 0.70 0.45 0.65 5 0.60 0.40 E 0.55 0.35 0.50 = 0.45 : 0.30 0.40 : --- : ----- 0.25 0.35 0.30 - : : : 0.20 0.25 : 0.20 : : - 0.15 0.15 - : ---- - : - 0.10 0.10 0.05 0.05 0.00 65 60 55 50 45 40 Vision Area / Total Area (%) kawneer. com ADMA010EN KAWNEER 40 190/350/500 Standard Entrances AUGUST, 2024 THERMAL PERFORMANCE MATRIX (NFRC SIZE) EC 97911-323 Thermal Transmittance 1 (BTU/hr . ft 2 .F) 500 (PAIR OF DOORS) Glass U-Factor 3 Overall U-Factor 4 0.47 0.82 0.46 0.82 0.44 0.81 0.42 0.80 0.40 0.79 0.38 0.78 NOTE: For glass values that are not listed, linear interpolation is permitted. 0.36 0.77 0.34 0.77 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with 0.32 0.76 NFRC 200. 0.30 0.75 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 0.28 0.74 4. Overall U-Factor, SHGC, and VT Matricies are based on 0.26 0.73 the standard NFRC specimen size of 1,920 mm wide by 0.24 0.72 2,090 mm high (75-1/2" by 82-3/8"). 0.22 0.71 0.20 0.70 0.18 0.70 0.16 0.69 0.14 0.68 0.12 0.67 0.10 0.66 SHGC Matrix 2 Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT3 Overall VT 4 0.75 0.41 0.75 0.36 0.70 0.38 0.70 0.34 0.65 0.36 0.65 0.32 0.60 0.34 0.60 0.29 0.55 0.31 0.55 0.27 0.50 0.29 0.50 0.24 0.45 0.26 0.45 0.22 0.40 0.24 0.40 0.19 0.35 0.21 0.35 0.17 0.30 0.19 0.30 0.15 0.25 0.17 0.25 0.12 0.20 0.14 0.20 0.10 0.15 0.12 0.15 0.07 0.10 0.09 0.10 0.05 0.05 0.07 0.05 0.02 KAWNEER ADMA010EN kawneer. com ROLLING DOOR SERVICE DOOR Models ESD10 & ESD10W THE STANDARD OFFERING THAT'S ANYTHING BUT.. FLEXIBILITY SECURITY Each doori is built to meet your exact specifications. Rolling steel doors are significantly more secure than We offer many options, from custom graphics to traditional garage or dock doors. perforated slats to help you create a product that's DURABILITY uniquely yours. Our standard Service Door is constructed to withstand PERFORMANCE daily use and warrantied up to 50,000 cycles. Our doors can be configured to withstand the MAXIMUM CLEARANCE full range of wind load requirements, including Miami-Dade, Texas Department ofInsurance, ANSI/ Ideal for areas with limited overhead room, the Service DASMA-108 and operational wind load of up to 20 Door curtains store in an overhead coil fully supported PSF. We can also supply seismic calculations, missile by the side guides. impact ratings and much more. RELIABILITY Rugged, commercial-grade construction requires little to no maintenance for the lifetime of the door. 800.294.4358 I cooksondoor.com eferred door solutions" CornellCookson, LLC. is anl ISO! 9001:2015r registered company COOKSON 7.2022 ROLLING DOOR SERVICE DOOR Models ESD10 & ESD10W (operational wind-load) STANDARD COMPONENT MATERIALS AND FINISHES BRACKETS Steel with powder coating to match curtain. Bolt to guide assembly and support counter-balance shaft and curtain. COUNTER-BALANCE SHAFT - Steel. Supports curtain and contains torsion springs for assisting operation. AM NA MACEEY ------------- HOOD - Galvanized steel with GalvaNex"M polyester enamel finish to match curtain. Encloses the curtain that provides weather resistance at the head of the door. REMOVABLE BELLMOUTH - Structural steel with powder coating in Gray, Tan, White or Brown. Located at the top of the inner and outer guide angles, coped and flared. Removable section for ease of curtain installation and repair. CURTAIN - Galvanized steel with GalvaNex" polyester enamel finish in Gray, Tan, White or Brown. Interlocking roll-formed slats with endlocks riveted to the ends of alternate slats to maintain slat alignment and prevent wear. GUIDES - Structural steel with powder coating to match curtain. Bolt to the wall and support the weight of the door. BOTTOM BAR - If width is less than 21'5", extruded aluminum supplied in mill finish. Ify width is greater than 21'5", steel supplied with powder coating to match curtain. OPTIONAL MATERIALS AND FINISHES Aluminum in mill, clear or color anodized Stainless Steel - 300 series in #4 finish. OPERATION AND STRUCTURAL SpectraShielde Powder Coating in more than 180 colors REQUIREMENTS For a more durable finish, consider upgrading to our GalvaNexrM Hand-chain, hand-crank, push-up and a variety of UltrarM, or SpectraShielde Ultrarm powder coat finish. motor options are available. Itis a polyester based textured wear resistant clear coat This product is supported by a guide assembly that provides increased resistance to corrosion oft the curtain attached to thej jamb construction. No additional header support is required unless hood supports are andi improved durability against normal abrasion and mandated by a larger opening width. scratching due to cycling. Hand-crank, push-up and motor operation is available. Hot-dip galvanizing on steel components Zinc-enriched, corrosion-resistant powder coating in Gray CUSTOM-DESIGNED SOLUTIONS Contact our experienced Architectural Design Support Team for help in customizing our products to fit your specific application. wwarhtecepomepcom 800.294.4358 - cooksondoor.com referred doors solutions" CornellCookson, LLC. is anl ISO! 9001:2015r registered company COOKSON 7.2022 HOIBH 8000 TVH3AO .8.LL HOIBH ONINEJO 8000 .S SL .0-0L 1 - HOISH ONINEdO .0-0L nh - 0 - # # o - 6 6 3 * e N € e e N E a E - NN 00 3 $ C e lt s € df 4 - a E E e Co 0 6 N - 4 # Here is your CDF Quote: QB-09420361 Quoted: 2025-03-17 CD Maurice Ngwaba +1-410-742-3996 Ships in 12 Business Days or Less! cma90@hotmail.com Ship to: 21801 MD Total Price: $1,917.87 North Star Station Bathroom Door Total: $1,272.72 x1 60MINUTES Package $1,272.72 M Single Hollow Metal Door $389.00 x1 $389.00 3'0" Width, 7'0" Height, 35-3/4" X 83-1/4" Actual Size, Polystyrene Core, Galvannealed, #1 Left Hand, 18 Gauge, Steelcraft Hinge, 161 Lock Prep Door Fire Label $12.60 x1 $12.60 APPLY 60 MINUTE FIRE RATED LABEL TO DOOR - Door Prep Single Hollow Metal Door Frame $217.00 x1 $217.00 3'0" Width, 7'0" Height, 3 Piece Knockdown, 7-3/4" Depth, 6-3/4" Throat, 16 gauge, Galvanneal, Left Hand - Masonry Frame Assembly Punch & Dimple Frame $47.25 x1 $47.25 8-3/4" PUNCH & DIMPLE ASSEMBLY FOR MASONRY BLOCK (Includes 8 - Butterfly Anchors and 8 - 3/8" x 5" Flat Sleeve Anchor Bolts) - Frame Prep Frame Fire Label $17.85 x1 $17.85 APPLY 60 MINUTE FIRE RATED LABEL & CLOSER REINFORCE FRAME - Frame Prep Hinges $9.50 x3 $28.50 Non-Removable Pin, 4-1/2" X 4-1/2", Ball Bearing, 26D, (075049) Hardware Closer $86.00 x1 $86.00 Door Closer, Grade 1, (1-4), Aluminum - Hardware Kick Plate $42.00 x1 $42.00 Kickplate, 8" X 34", US32D, (051954) Accessories Wall Stop $4.20 x1 $4.20 Wall Stop, 236W, 32D, (053239) - Accessories Weatherization Kit $89.32 x1 $89.32 36"x84" Weatherization Kit: (36"x84" Weatherstrip, 36" ADA Threshold, 36" Door Sweep) Electric Strike $339.00 x1 $339.00 8300 Series Electric Strike, For Latchbolt Locks, 12 or 24 volt, 630 Satin Stainless Steel Crate Charge $129.00 Estimated Processing Charge $53.96 Factory / Warehouse Estimated Freight Shipping to 21801 $375.00 Common Carrier Estimated Freight Shipping $310.00 Lift Gate Delivery Fee $65.00 You Saved $254.54 With Standard Delivery Terms & Conditions Quote Products $1,401.72 To place order, please submit payment Estimated MD Tax our secure $87.19 through online payment form: Estimated Total LINKED HERE Shipping $375.00 Processing Charge Order cannot $53.96 Special products be returned. Full Terms & Conditions can be found Total $1,917.87 on our site at ww.cdidistripulors.com Remit to Address: 254 W Eastland Ave, Gallatin, TN 37066 - We'll Beat Their Price! - On Equal Grade Material HAGER cO M PANIES 2 5 70 34K SERIES STANDALONE CYLINDRICAL LOCK - One Family. One Brand. One Vision. TM www.hagerco.com GV LLE LCE Headliners Models IRuE Dependable lockset with anti-vandal 34K1 Keypad - Storeroom free-wheeling lever mechanism 34K2 Keypad + Prox - Storeroom Upt to 500 total access codes available to be categorized as User, Service Mechanical Specifications User, or Manager Door 1-3/8" (35mm) - 2" (51mm) Keypad programmable no software Thickness: or gateway necessary Backset: 2-3/4" (70mm) Purchasing audit trail software package allows programming to Latchbolt: 1/2" (13mm) throw, stainless steel be transferred to locks via laptop. 1-1/8" X 2-1/4" (29mm X 57mm) square faceplate standard Software also grants access to audit 3/4" Anti-Friction latchbolt available for pairs of fire doors trail features. Strike: 1-1/4" X 4-7/8" (32mm X 124mm) ASA Strike - standard 1-1/8" X 2-1/4" (29mm X 57mm) Tee Strike optional Features Finishes: US26D and US10B Non-handed design Door Prep: Standard ANSI A115 Prep, modified by adding four All metal pushbutton keypad, additional thru-bolt holes ADA compliant Certifications: ANSI A156.02 Grade 1 Compliant Mechanical key override ANSI A156.25 Compliant Weatherproof design (-31 F to 151 F) UL Listed up to 3 hours for "A" labeled doors with two gaskets supplied standard UL10C Positive Pressure Rated 34K2 model uses 26 bit 125kHz ADA Compliant Wiegand HID proximity cards; 500 FCC Compliant card users available Cylinders/ Brass 6-Pin, keyed different - Schlage C keyway - Standard Real time clock (RTC) Cores: Cylinder drilled 6-Pin, Keyed 5-Pin - Standard Quick passage mode available Small Format Interchangeable Core Option available without being in programming mode 6-Pin and 7-Pin SFIC cores sold separately Individual, group or total lockout codes available Warranty: Two-year warranty on mechanical and electrical components Lowl battery alert One-year warranty on finish Adjustable volume Audible Keystroke option Additional Electronic Features & Specifications Four AA alkaline batteries provided; Access codes must be 4-8 digits 30,000 cycle battery life Relocking delay Adjustable from 2 to 99 seconds 9V external power supported Temporary keypad lockout (based on failed entry attempts) Tamper attempt alarm (alarm sounds after certain amount of failed Applications attempts) Audit trail features can be downloaded from the lock with the purchase Assisted Living Facilities of 34K1 (2-639-6000) or. 34K2 (2-639-6001) software kits Multi-Family Audit trail provides last 2,000 events Retail Buildings Dual credential option available on 34K2 Office Buildings Fuzzy credential entry available Airports Schools System Requirements Healthcare Retrofit applications where Microsoft Windows based operating system (XP up to and including Windows 10) hardwiring is not practical CD Rom drive Note: Laptop required to transfer or download data at the door. 34K Series - Standalone Cylindrical Lock Lever Styles 3-29/32" 1-15/16" (99mm) (49mm) - Withnell 9-9/16" (243mm) Archer 3" (76mm) August Audit Trail Accessories 2-639-6000 - 34K1 Software Kit Includes 34K1 Software Disc, USB cable and Programming manual 2-639-6001 - 34K2 Software Kit Includes 34K2 Software Disc, Prox card reader, USB cable and Programming manual 34K Series - How to Order 34 K1 2-3/4" US26D WTN SCC KD ASA KD FUNCTION FINISH CONVENTIONAL STRIKE K1 - Keypad - US26D - Brushed KEYWAY ASA - ASA Strike Storeroom Chrome SCC - Schlage C 1-5/16" Lip K2 Keypad+Prox US10B - Oil Rubbed (Standard) (Standard) Storeroom Bronze Others optional TEE - Tee Strike BACKSET/FACEPLATE KEYING OPTIONS 2-3/4" (70 mm), SC (Standard) KA - Keyed Alike 6PKey - 6Pin Keyed 2-3/4" (70mm), RC KD - Keyed Different 7PKey - 7Pin Keyed (Standard) SFIC - Small Format LEVER STYLE OBC - "O" Bitted Cylinder PRODUCT GROUP 1BC - "1" Bitted Interchangeable WTN - Withnell Lever Cylinder 34 - Cylindrical, Grade 1 MK - Master Key Core Housing (Standard) (NC) ARC - Archer Lever CMK - Construction TW- Tactile Warning AUG - August Lever Masterkeying 3/4L- 3/4" Latchbolt NC- SFIC, No Core Hager Companies 139 Victor Street Saint Louis, MO 63104 800-325-9995 www.hagerco.com G+ in YouTube 5-500-7013 Berridge Cee-Lock Panel STANDING SEAM SYSTEM / The Berridge Cee-Lock Panel is an architectural metal standing seam panel that incorporates an integral snap-lock seam and an optional patented vinyl weatherseal, Materials 24 and 22 Gauge Steel 16 V" Coverage (419 mm) 0.032 Aluminum 4 Snap-Lock Seam* Specifications 1%" (with optional Vinyl Weatherseal: US Patent No. 4641475) Uses: Roof, Fascia (38 mm) Coverage: 161 V2" or 111 1%"** Finishes: Smooth, optional striations Fasteners: Concealed 11%" Coverage (292 mm)** Applications: Solid sheathing*** * Seam: 1V2" snap-lock seam Snap-Lock Seam* Optional: Extruded vinyl weatherseal* 1%" (with optional Vinyl Weatherseal: (38 mm) US Patent No. 4641475) Installation Panel is available from the factory in continuous lengths to a maximum of 40' 16V" profile may be site formed in continuous lengths with the Note: Berridge CL-21 Roll Former Vinyl weatherseal required for watertight warranties 11V" profile may be site formed in continuous lengths with the Not available with striations. Berridge CL-16 Roll Former ** Entire roof area shall be covered with Berridge approved underlayment Continuous Cee-Rib available with steel for higher wind uplift resistance Use Stainless Steel Cee-Lock Clip with Aluminum panels Pictured Above Project: Iron Mountain Hot Springs Glenwood Springs, CO Installing Contractor: Superior Home Concepts, LLC Color: COR-TEN AZP Raw All information subject to change without notice. See website for details, specifications and Watertightness Warranty requirements. O Berridge Manufacturing Company 2024 - (800) 669-0009 www.Berridge.com BERRIDGE CEE-LOCK PANEL TESTING AND CERTIFICATION SUMMARY CHART CATEGORY CHARACTERISTIC TEST METHOD PURPOSE RESULT Underwriters Test method to determine uplift UL 580/UL 1897 See Load Chart on Berridge website Laboratories resistance of roof assemblies PERFORMANCE Test method to determine uplift Uplift Resistance ASTM E-1592 See Load Chart on Berridge website resistance of open framing systems Test methods for firet tests of roof Room Fire Performance UL790 Class AF Rating coverings FIRE Design Numbers: P225, P227, P230, P237, P250, Room Fire Performance UL2 263 Fire tests of building construction and P259, P508, P510, P512, P514, P518, P701, P711, P713, materials P717, P719, P720, P722, P723, P726, P731, P732, P734, P801, P815, P819, & P824 Impact resistance of prepared roof ENVIRONMENTAL Impact Resistance UL 2218 Class 4 Rating coverings Test method for water penetration ASTME E-1646 Water Penetration ofr metal roofs by uniform static air No Leakage at 6.24 PSF Pressure Differential ASTME-331 pressure difference AIRAND MOISTURE Airl ASTM E-1680 Test method for rate of air leakage Lessi than 0.20 CFM at 6.24 PSF Pressure Leakage ASTM E-283 through exterior metal roofs Differential FL #14210.1 (24 GA Purlins) FL #12691 (24 GA Plywood) Local and state approval of products FL #11269.2 (24 GA or 22 GA Steel Deck) and systems for compliance withi the FL #11269.3 (0.032A AL Plywood) Florida Product Approval TAS125 structural requirements oft the Florida FL #11269.4 (0.032 AL Steel Deck) Building Code FL#14210.2 (22 GA Purlins) FL# #11241.2 HVHZ (22 GA Steel Deck) FL #11241.1 HVHZ (24 GA - Plywood) Construction No.334 (24 GA Open Framing) Construction No.3 381 (24 GA Steel Deck) Underwriters ULS 580 Standard for Tests for Uplift Resistance Construction No. 404 (24 GA Plywood) Laboratories Uplift Class 90 of Roof Assemblies Construction No. 474 (24 GA PRODUCT OSB) Construction No. 689 (0.032 AL Steel LISTINGS Deck) Construction No. 690 (0.032 AL Plywood) Miami Dade County approval of building TAS125 NOA #17-0808.04 (24 GA Plywood) Miami Dade products directly relatedi to the structural FMG4 4471 NOA #21.1213.02 (22 GA Metal Deck) wind resistance RC-203 (22 GA Purlins) TDI Listed UL580 Texas Department of Insurance Listing RC-210 (22 GA Steel Deck) ASTMI E-1592 for wind capacities RC-209 (24 GA Plywood) RC-482 (0.032 AL Steel Deck or Plywood) ICC-ES ULS 580 Capacity report by the International ESR-3486 (24 GA,22 GA, or 0.032 AL Plywood) Code Counsel - -Steel only Steel and Aluminum Fori further details please visit www.berridge.com CORPORATE HEADQUARTERS 2610 Harry Wurzbach Road San Antonio, TX 78209 (800) 669-0009 www.Berridge.com 3/14/25, 3:07 PM Vee-Panel Fascia Wall and Soffit Panels Berridge Manufacturing Co. I Vee-Panel HOME / PRODUCTS / WALL, SOFFIT, CEILING AND FASCIA PANEL SYSTEMS / VEE-PANEL PRODUCT INFO ittps:l/www.Derridge.com/products/ascla-wal-and-sofit-panels/vee-panel. 1/5 3/14/25, 3:07 PM Vee-Panel Fascia Wall and Soffit Panels Berridge Manufacturing Co. Product Gallery JONES NE - TILEN ITET r € Product Information ittps:l/www.Derridge.com/products/ascla-wal-and-sofit-panels/vee-panel. 2/5 3/14/25, 3:07 PM Vee-Panel Fascia Wall and Soffit Panels Berridge Manufacturing Co. Elevate your project with the Berridge Manufacturing Vee-Panel. This distinctive and hassle-free wall panel can add character to any space. These Berridge metal wall panels are crafted for versatility and minimal upkeep. When applied, these pre-finished panels complement both open framing and solid sheathing applications. Embrace creativity across various project dimensions, from wall and soffit board plans to ceilings, fascias, sheet metal siding and Berridge Fencing Systems. This product offers various application opportunities for your next project. Available in a sleek, smooth finish or the warmth of wood grain embossing, the Berridge Vee-Panel provides a customizable aesthetic touch for metal panel siding. With a pattern featuring V-grooves spaced at four and one-quarter inches, this panel offers a unique design element. Opt for the optional vented version to introduce 6.46 square inches of Net Free Vent Area (NFVA) per linear foot, enhancing airflow while maintaining a polished appearance. The Berridge Vee-Panel effortlessly combines practicality with style, making it a standout choice for your architectural endeavors. When you need a solution for your soffit panel systems or fencing, look no further than our Vee-Panel for your next project. Materials 24 and 22 Gauge Steel Specifications Uses: Wall, Soffit, Ceiling, Fascia, Screen Wall, Berridge Fencing System Coverage: 12 3/4" Finishes: Smooth, optional wood grain Fasteners: Concealed Applications: Vertical over open framing or solid sheathing Pattern: 4 1/4" oetween grooves, optional venting ittps:l/www.Derridge.com/products/ascla-wal-and-sofit-panels/vee-panel. 3/5 3/14/25, 3:07 PM Vee-Panel Fascia Wall and Soffit Panels Berridge Manufacturing Co. Installation Panel is available from the factory in continuous lengths to a maximum of 40' Vented option provides 6.46 square inches of Net Free Vent Area (NFVA) per linear foot of panel. (BMC does not recommend vented products in applications subject to aggressive atmospheres, marine environments or high humidity due to the corrosive nature of these environments on raw edges of steel.) Get Started With Berridge RESOURCE CENTER FIND A REP GET QUOTE BERRIDGE MANUFACTURING CO. Corporate & Sales Headquarters 2610 Harry Wurzbach Road San Antonio, Texas 78209 (800) 669-0009 Toll Free ittps:l/www.Derridge.com/products/ascla-wal-and-sofit-panels/vee-panel. 4/5 3/14/25, 3:07 PM Vee-Panel Fascia Wall and Soffit Panels Berridge Manufacturing Co. (210) 898-4896 Local Calls (210) 650-0379 Fax PRODUCTS RESOURCES + f in BERRIDGE BRANCHES FIND A SALES REP JOBS Home Products About Blog Jobs Contact This Site is updated frequently without notice. Copyright 0 2025 Berridge Manufacturing Co. All rights reserved. Website By LEADHUB ittps:l/www.Derridge.com/products/ascla-wal-and-sofit-panels/vee-panel. 5/5 BERRIDGE (800) 669-0009 www.Berridge.com MANUFACTURING COMPANY Standard Colors Shasta White Parchment Almond Sierra Tan Buckskin Medium Bronze Aged Bronze Copper Brown Dark Bronze Terra-Cotta Deep Red Colonial Red Burgundy Bristol Blue Royal Blue Patina Green Hemlock Green Teal Green Forest Green Evergreen Hartford Green Cityscape Zinc Grey Charcoal Grey Matte Black Premium Colors Metallic Colors Premium colors require ar nominal surcharge. Metallic colors are premium finishes which require a nominal surcharge. Natural White Award Blue Champagne Copper-Cote" Antique Copper-Cote Natural Metal Finish Acrylic-Coated Galvalume" is a coated sheet product that combines the corrosion resistance of Galvalume" steel sheet with a clear, organic resin plsdometpadeandhomon Acrylic-Coated Zinc-Cote" Lead-Cote" Preweathered side of Galvalume"s substrate. Galvalume" Galvalume" Print Pattern Finishes Consult BMC on print pattern pricing and availability. COR-TEN AZPO Raw Walnut Honey Walnut Rosewood Boston Cherry Please consultt the BMC Technical department atl Technical@Beridgecomt for LEED compliance information. Duet tol limitations int the printing process, please request actual color chips fora accurate color viewing. BERRIDGE STOCK AVAILABILITY AND COLOR DETAILS S- Stock Color N-I Non-Stocking Color N/A - Not Available 24 Gauge 22 Gauge* 0.032A Aluminum* 0.040A Aluminum* Standard Colors SR EM SRI Testing results for Kynar 500' or Hylar 5000' 48" 42" 48" 42" 48" 42" 48" 42" PVDF Resin-Based Color Finishes coil coating Aged Bronze S S S N N N N N 0.31 0.85 31 applications: Almond S S S N N N N N 0.65 0.86 77 - Specular Gloss: (ASTMD-523) Low andi medium gloss only Bristol Blue S S N N N N N N 0.33 0.85 33 : Color Uniformity: (ASTM D- -2244)Colord controlled both instrumentally andv visually Buckskin S S S N N N N N 0.43 0.83 46 DryF Film Thickness: (ASTMI D-7091,ASTMI D-1005, NCCA1 111-13, Burgundy S S N N N N N N 0.32 0.84 32 11-14,1 11-15)F Primer 0.20: t 0.05 mil,t topcoat 0.75 +0.05 mil Charcoal Grey S S S S N N N N 0.29 0.84 28 Hardness: (ASTMD D-3363, NCCA1 11-12,E Eagle Turquoise Pencils) HBI Minimum Cityscape S S S S N N N N 0.48 0.85 54 . Adhesion (X-Cut): (ASTMD D-3359) No adhesion loss Colonial Red S S N N N N N N 0.35 0.83 35 . Adhesion (Crosshatch): (ASTMD-3359) Noa adhesion loss Copper Brown S S N N N N N N 0.32 0.85 32 . Abrasion Coefficient: (ASTMI D-968) 100liters/milt topcoat Dark Bronze S S S S N N N N 0.28 0.85 27 Directl Impact Flexibility: (ASTMD-2794, Gardner Impact Deep Red S S N N N N N N 0.41 0.84 44 Tester,1 1/10" Distortion) Excellent, no removal Evergreen S S N N N N N N 0.30 0.83 29 . Reversel ImpactF Flexibility: (NCCAS Spec. 11, ASTMI D-2794, Gardnerl Impact Tester,5 5/8" ball Impact force Forest Green S S S N N N N N 0.30 0.83 29 ini inch pounds equal tor metalt thickness)E Excellent, no Hartford Green S S N N N N N N 0.27 0.83 25 cracking or loss of adhesion Hemlock Green S S N N N N N N 0.31 0.84 31 . Formability: (ASTMD D-4145,1 180°1 T-Bend on1 1/8 Mandrel) No cracks or loss of adhesion Matte Black S S S S N N N N 0.26 0.83 24 Erosion: (20y years, 45" South Florida) Maximum 15% loss Medium Bronze S S S S N N N N 0.31 0.85 31 . Humidity Resistance: (ASTMD-2247)! Passes 2000 hours on Parchment S S S N N N N N 0.60 0.85 71 Galvalume" and 4000 hours on Aluminum Patina Green S S N N N N N N 0.34 0.85 35 . AcidF Resistance: (ASTMD-1308,1 Proc. 311, 10% Sulfuric Acid spot test, 241 hour exposure) Excellent, no effect Royal Blue S S N N N N N N 0.27 0.85 26 . Salts Spray Resistance: (ASTME B-117)P Passes 2000 hours on Shasta White S S S N N N N N 0.61 0.85 73 Galvalume' and4 4000 hours on Aluminum Sierra Tan S S S N N N N N 0.39 0.85 42 . Alkalif Resistance: (ASTMD-1308, Proc.5 5.2, 10% Sodium Teal Green S S N N N N N N 0.26 0.84 25 Hydroxide, 241 hour exposure) Excellent, no effect Terra Cotta S S N N N N N N 0.36 0.84 38 . DetergentF Resistance: (ASTMD-2248,7 72H hours Zinc Grey S S S S N N N N 0.39 0.85 42 immersioni in3 3% solution atl 100"F) Excellent, no effect Acrylic-Coated Galvalume" S S S S N/A N/A N/A N/A 0.67 0.20 59 . Resistancet to Acid Pollutants: (ASTMD D1308 Proc. 3.1.1,24 houre exposure 10% HNO vapors)E Excellent, noe effect Premium Colors* Weathering Color Retention: (ASTM D-2244, Awardi Blue S S N N N N N N 0.17 0.83 11 20 years, 45" South Florida) Maximum! 5N NBS units color Natural White S S N N N N N N 0.71 0.85 86 change . Weathering- Chalk Resistance: (ASTM D-4214, Metallic Colors* 20y years, 45° South Florida) Notv worset than Antique Copper- Cote S S N N N N N N 0.33 0.84 34 No. 8rating Champagne S S N N N N N N 0.40 0.85 43 Notes: 1. ASTM- American Society for Testing! Materials Copper- Cote" S S N N N N N N 0.51 0.85 59 2. NCCA- National Coil CoatingA Association Lead- Cote" S S N N N N N N 0.36 0.86 38 3. Galvalume" is5 55%A Aluminum-Z Zinc alloy coated sheet steel andisar registered trademark ofE BIECI International Inc. Preweathered Galvalume" S S N N N N N N 0.40 0.85 43 4. Kynar 500'i isa ar registered trademark belongingt to Arkema, Zinc- Cote" S S N N N N N N 0.53 0.83 59 Inc. 5. Hylar5 5000*1 isa registeredt trademark belonging to Print Pattern Finishes** Solvay Solexis, Inc. COR-TEN AZP* Raw S N S N N/A N/A N/A N/A 0.32 0.89 34 S Stock Color; Nots subjectt toa minimumo order Walnut S N S N N/A N/A N/A N/A N Non-Stock Color; Subjecttoinventory onhand;4 4500sfminimum order Honey Walnut S N S N N/A N/A N/A N/A N/A for22Gaugea NotA Available ando 0.032&0.040A Aluminum Rosewood S N N N N/A N/A N/A N/A Consult BMConp producta availability. Premium andM Metallicf finishes are subjecttoa nominal surcharge, contactE BMCf fora additionali information. Boston Cherry S N N N N/A N/A N/A N/A Consult Berridgec onp pricinga anda availabilityf for PrintF Pattern Finishes. BMC: SAN ANTONIO BMCH HOUSTON BMCI DALLAS BMCI DENVER BMC CHICAGO BERRIDGE FLORIDA SALES 6515 Fratt Rd. 1720 MaurySt. 20150 California Crossing 7505E.4 41stA Ave. 11750 Carolinal Dr. CORPORATION" SanA Antonio, TX78218 Houston, TX77026 Dallas, TX75220 Denver, C080216 W. Chicago,l IL 60185 8802' Venture Cove (210)6 650-3050 (713)223-4971 (972)5 506-8496 (303)322-3703 (630)231-7495 Tampa,FL33637 Fax (210)650-0379 Fax( (210) 650-0379 Fax (210)6 650-0379 Fax(210)6 650-0379 Fax(210)6 650-0379 (813)3 335-4505 Fax(210)650-0379 BMCF PHOENIX BMC ATLANTA BMC OKLAHOMACITY BMCKANSAS CITY BERRIDGE CALIFORNIA: SALES 5717W. Washington St. 319L Leel Industrial Blvd. 1400E ExchangeA Ave. 1235S Southwest Blvd. CORPORATION" Phonix,AZ85043 Austell, GA3 30168 Oklahoma City, OK7 73108 Kansas City, KS 66103 8442 Sultana Ave. (602)385-1237 (770)9 941-5141 (405)2 248-7404 (913)2 227-0855 Fontana, CA92335 Fax (210)6 650-0379 Fax( (210)6 650-0379 Fax (210)6 650-0379 Fax (210)6 650-0379 (562) 402-2081 CRRG Fax(210)6 650-0379 EPAECSU CORPORATE & SALES HEADQUARTERS MANUFACTURING FACILITY * Berridge California andF Florida RATED 2610 Harry Wurzbach Road 2201 Rudeloff Road Sales Corporations are separate PRODUCT entities from Berridge Manufacturing San Antonio, TX 78209 Seguin, TX 78155 Company. (210) 650-3050 (830) 401-5200 WWW.BERRIDGE.COM Fax (210) 650-0379 Fax (210) 650-0379 Berridgel Manufacturing Company Coloro Chart 2025]F PrintedintheUISA Rev. OL2025 PAC-TITE GUTTER AND DOWNSPOUT SYSTEMS The design of the PAC-Tite Gutter and Downspout Systems Variety of colors, sizes and metal gauges line improves water management performance while Easyi installation and decreased labor costs complementing: a building's aesthetic qualities. Custom Prefabricated miters and accessories to eliminate the need engineering, such as the heavy aluminum gutter strap design, fori field rabrication also promotes ease of installation and helps the gutter and downspout systems withstand harsh environments. Petersen's DOWNSPOUTS PAC-Tite line is the onlys system that's Factory Mutual The PAC-Tite industrial downspout is available in a variety of approved. It also features ANSI/SPRI GT-1 compliance. standard sizes, or it can be fabricated to meet specific job GUTTERS requirements. The open-face design makes clearing out debris PAC-Tite Gold gutters offer easy installation, outstanding ane easy task. Downspouts are manufactured with simple connection configurations and include three attachment oerformance and an attractive appearance. The products include a: 2-in. wide external wind strap every 6 feet and straps per 12-foot section, which enables fast gutter hangers every: 241 in. O.C. to comply with the ANSI/SPRI and easy installation. GT-1 Standard. The unique, heavy aluminum gutter hanger SCUPPER, COLLECTOR BOX is designed to eliminate the need for drilling and riveting and The PAC-Tite Gutter and Downspout Systems line includes allows for full thermal movement of the gutter. Offered with an a variety of custom-designed scuppers and collector boxes optional roof flange or slotted drain bars for ballast retention, that meet performance requirements that architects and PAC-Tite Gold gutters offer maximum roof drainage and ease contractors want. Their unique design provides maximum ofi installation in a one-of-a-kind edge metal solution. security and performance to protect against leaks, and is a Benefits include: decorative and functional means of water control. > ANSI/SPRI GT-1 tested to comply with the standard for gutter systems - FM-approved for wind uplift protection GUTTERS PAC-TITE Gold Gutter IGG-1 PAC-TITE Gold Gutter IGG-2 PAC-TITE Gold Gutter IGG-3 PAC-TITE Gold Gutter IGG-B PAC-TITE LTK-Style Gutter PAC-TITE LT Half Round Gutter DOWNSPOUTS SCUPPER, COLLECTOR BOX Industrial Downspout Industrial Downspout Corrugated Rectangular Round Downspout Thru-Wall Scupper Thru- Wall Collector Box (Closed) (Open) Downspout PAC-CLAD 800 PAC CLAD I PAC-CLAD.COM 02021 Petersen Aluminum CIRLISLE COM INDUSTRIAL DOWNSPOUT (Closed) The Industrial Downspout is available in a variety of standard sizes, or it can be fabricated to meet specific, job requirements. Downspouts are manufactured with simple connection configurations and include three attachment straps per 12' section, which enables fast and easy installation, CUSTOM CAPABILITIES Specially fabricated products are available to meet the unique needs of each project. COLORS Choose among a wide range of standard colors and finishes that meet your. job requirements. A 35-Year Kynar 5000 Finish Warrantyi is included on coil-coated standard colors, Custom post-coated Kynar 5000 colors are available (on aluminum substrate only) with ani included 10-Year Kynar 5000 Finish Warranty or a: 20-Year Kynar 5000 Finish' Warranty is available upon request. Anodized finishes are also available. Please email Technical Services regarding pricing for Anodized finishes, ACCESSORIES Factory fabricated: accessories provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings. MATERIAL ALSO INCLUDED Downspouts can be manufactured in thei following All straps are included and will arrive to the job site with the materials. product. 24 ga. steel - .050" aluminum .040" aluminum - .063"a aluminum PAC-CLAD > E T E R S E NI 800 PAC CLAD I PAC-CLAD.COM 02024 Petersen Aluminum CARLISLE COMPANY - Z W * 3 0 C - - - W A e 3 I e a e. B 8 de I 5 e - e 8 de 8 - e - 5 B e I S e e : - E 1 : € a - - e d0 5 - - E E 3 S e de - I I de - - e 2 5 N 8 E 8 t 5 - = 3 e E o 2 - 4 V a 6 - 6 0 5 5 - 8 0 a 6 A a B e E 2 E $ e 2 e E E E à de S - 8 f - a 3 - 3 a a a a a a 3 - 3 - 5 a a 8 3 3 a a - 9 3 3 E 8 a - 5 a 3 - 8 - 3 3 # E 5 e 8 8 de 5 - bn 0 a a e a E 3 3 E a a - a e 3 o e DE e - - : 8 - - a a a 1 - a - - a - 3 = E 63 E E a e a o i 3 2 B 00 a M a e a . 6E e - N € - : E E E I 8. - - 3 3 0 à I 1 2 B - : 8 - - I - E I E 5 1 3 3 - S 8 8 8 8 I e : 5. € - E a B 3 B: E - B de 2 I I &. 3 I I - I 3 r 3 I I 8 8 3 8 I 00 49 S 2 - RAINFLO PRECONFIGURED ABOVE GROUND SYSTEMS Simplify your project design and installation with a RainFlo complete rainwater collection system. The RainFlo AGS systems arrive preconfigured with all items installed on the tank. Simply connect the included components to your downspout and connect the downspout and pump to the tank. The system is designed with premium components for optimal performance in residential or commercial applications, and includes water storage, filtration, pumping, and hardware. COMPONENTS INCLUDED: SHIPPED WITH TANK COMPONENTS INSTALLED: inlet rain gauge overflow outlet pump connection 000 bulkhead fitting and plug ORDERING INFORMATION Part Number Gallon Capacity* Tank Dimensions Pump Additional Components 46" diameter X 50" 305AGS 305 height, with lid MHP50A Pump cover, first flush, leaf eater, calming inlet, floating extractor, overflow, hose 48" diameter x73" 500AGS 500 MHP75A (5'), tank level monitor, and hardware and height, with lid fittings 87" diameter X 53" 1100AGS 1100 MHP75A height, with lid 1550AGS 1550 87" diameter X 67" MHP150A Pump cover, first flush(qty. 2), leaf eater height, with lid (qty. 2), calming inlet, floating extractor, 87" diameter X 89" overflow, hose (5'), tank level monitor, and 2100AGS 2100 height, with lid MHP150A hardware and fittings *Once the tank is plumbed, the tank will hold less than the max gallon storage capacity, as the overflow outlet is located below the top oft the tank Preconfigured Above Ground Systems I - RainHarvest Systems RainHarvest.com 800-654-9283 RAINFLO' COMPLETE SYSTEM COMPONENTS We've selected premium components for optimal performance in our complete above ground rainwater collection systems. Please note: Additional PVC parts to connect the leaf eater to the first flush and the first flush to the inlet are required, but not included. First Flush Leaf Eater MHPA Series Pump Pump Cover Floating Extractor A simple and effec- Prevents debris from Multistage horizon- Protects pump from Stainless steel float- tive first flush water entering the rain- tal, above ground harsh environments ing filter with coarse diverter that requires harvesting system, pump with integral and includes a screen and backflow minimal mainte- improves water qual- flow regulation pro- matching base to preventer (pre- nance ity and reduces tank viding demand-based keep the pump off installed) maintenance pump control the ground Calming Inlet Overflow Hardware/Fittings Tank Level Monitor 3" Prevents swirling of the Acts as the tank overflow Pump connection, bulk- Tank level indicator with an water, disturbance of fine when the system is full, head, gaskets the hard- easy-to-read display dial sediments and introduces stainless steel mesh ware and fittings required and utilizes a weight float, oxygen at the bottom oft the screen prevents mosqui- for installation of a com- suspended on a string line tank (pre-installed) toes from entering tank, plete system (pre- to provide accurate read- plumb away from struc- installed) ings (pre-installed) tures (pre-installed) ADDITIONAL OPTIONS UV Complete Disinfection Systems RainFlo complete UV disinfection systems use sediment filtration and UV disinfection to clean and disinfect rainwater. System options include double or triple filtration, 10, 15, or 25 GPM, water flow direction from left to right (L-R) or right to left (R-L), and blue or clear filter housings. RainAid Tank Top Up Valve The RainAido valve is designed to connect a backup water supply to a rain- water tank. f the rainwater level drops below a pre-set level, the RainAido valve will open to maintain the water level using an alternative source. Connects via 3/4" male pipe thread. RainHarvest Preconfigured Above Ground Systems I RainHarvest Systems RainHarvest.com - 800-654-9283/013025 Systems E1912 GNVTANVW 390IN8WVO 8 13381S NV3T30E ENABLL BONEGISIN SITVHOW NOIIVAONEN ENV NOILIGOV WOH E - E I 8 rLOL - 6 W - B o - 60 4 SE8 80 I 00004 e a 6 a 5 B 5 u 8 3d 58 Se - E ail B B e 1 anl N 33 E Bs 2 I 83 5 55 E - t 4 B E I - E E a . - I - 4 I - a d 95 . I ET - 1 1 E a o8 I E 8 & B 8 a 8 E1912 ONVIABVW 390I88WVO 8 1E38IS Nv3130 ENABLL BONEGISIN SITVHOW NOILVAON3S ONV NOILIGOV WOH 9 - - 1 I J % 1e E - - - - - - I - - B3 E 5 2 - 5 E02 E1912 ONVIABVW 390I88WVO 8 1E38IS Nv3130 ENABLL BONEGISIN SITVHOW NOILVAON3S ONV NOILIGOV WOH 9 - y 1E E - de H - : EEEE - - M I1 CI - E - - - t 5 1 - e 9 e E1912 ONVIABVW 390I88WVO 8 1E38IS Nv3130 ENABLL BONEGISIN SITVHOW NOILVAON3S ENV NOILIGOV WOH 9 1 - L as I I A 5 3 - ) 8 - : . E - 4 E : -1 3 5 5 DE n E I MAnnA E : E 3 E - e B I 4. G BE E a 8 1S5 8 I I a - 1 - - i o y - - 2 @ 3 EE - a 8 i a I 5 do 9s E1912 ONVIABVW 390I88WVO 8 1E38IS Nv3130 ENABLL BONEGISIN SITVHOW NOILVAON3S ONV NOILIGOV WOH o o ) o u a 9 a o a 4 I 1 I E - : ai 83 - à I 3 a e soi o o 1 o 0 9 o o 0 t 55 E1912 ONVIABVW 390I88WVO 8 1E38IS Nv3130 ENABLL BONEGISIN SITVHOW NOIIVAONEN ENV NOILIGOV WOH 3 A - 1 4 538 > 0 E - Ea - 0 E 4 - 1 E: E % E3 E1912 ONVIABVW 390IN8WVO 8 1E38IS Nv3130 ENABLL BONEGISIN SITVHOW NOIIVAONEN ENV NOILIGOV WOH E C D a 5 a a a o o a - - e 8 EE E e a E a XXX XXX I E 3 e E S G I - X 9 e E1912 ONVIABVW 390I88WVO 8 1E38IS Nv3130 ENABLL BONEGISIN SITVHOW NOILVAON3S ONV NOILIGOV WOH 8 8 9 E 3 3 3 : 3 3 - 3 3 A 3 B 8 8 8 8 8 3 a 85 3 : : € % 7 a * 9 e a - - D 89 882 288 a 3 4 1 a B 4 - 5 - Atachmunt #1 JamesHardie MENU R Hardie Plank Lap Siding Download the Product Catalog > Request a Sample > Request a Quote > Traditional and timeless. Sleek and strong. Hardie Plank lap siding is not just our best-selling product -it's the most popular brand of siding in North America, protecting and beautifying more homes from coast to coast. https./wwwameshardie.com/products/mardieplank-lap-siding 8/1/23, 5:39 PM Page 1 of 12 HARDIEE PLANKI (LAP SIDING SMOOTH You can't go wrong with this sleek, modern siding. Find the perfect color in our Statement Collection products or Dream Collection products. Or get it primed for paint. THE STATEMENT COLLECTIONTM Classic shades-engineered with iong-lasting ColorPlus8 Technology-wil make a statement that resonates for generations. The tried and true colors of. James Hardie's S Statement Collection T products were designed for every home. They're our most popular hues. And they are readily available in your region. SIDING COLORS Arctic White -laphyidins -Ebvlmt Cobbustnu, fandidins Request a Quote > Request a Sample > Colors shown may vary due tos screen resolution. Please see actual product sample for true color. AVAILABLE SIZES THICKNESS:0312 WIDTHS: 8.25" EXPOSURES: 7 LENGTH: 144" boards Warranty Information: > #2 AHackmunt HARDIETM ARCHITECTURAL COLLECTION FINE SAND Fine Sand has an even-textured, smooth, and consistent finish for a sleek IOOK. Shiplap joints create v-grooved, architectural lines to add visual interest. Paneis can be oriented horizontally or vertically to achieve a variety of designs. PRIMED FOR PAINT James Hardie's primed for paint collection gives you the power to choose paint for your home's exterior. It's primed. It's ready for field painting. It's a durable, high-performance canvas. AVAILABLE SIZES THICKNESS: 0.312" LENGI TH: 120" 144" WIDTHS: 48.1 197" 48. 197" 96" 48. 197" Request a Sample > Atlushmunt #3 ROOFING Sikaplan ROOF SYSTEM PVC PERFORMANCE AT A COMPETITIVE PRICE Jika BUILDING TRUST ILLUSTRATION KEY 4 Insulation Fastener SIKAPLAN PRODUCT SPECIFICATIONS 1 Structural Deck 5 Gypsum Roof Board (if Required) 2 Vapor Retarder (IF Required) 6 Sikaplan Membrane Color EnergySmart White, Tan and Reflective Gray 3 Insulation Thickness Available in 60 mil for bareback and feltback membranes" Reflectivity 0.85"* MECHANICALLY ATTACHED Emissivity 0.89** SRI 107** Roll Size 60 mil 5ft. X 1001 ft. and 10 ft. x 100 ft.: : Please consult the Product Data Sheet prior to any use andp processing. Our most current Generals Sales Conditionss shall apply. "Contact yourk local Sikan roofingn representativet for upi tod date product offering "*Based onE EnergySmart White : Feltback only availablei in1 10f ft. wide SIKAPLAN MECAMANEALIYATTACHED SYSTEM This mechanitalyattached: system isy your best choice when speed and ease of installation arei important. It features metal plates fastenedi in the membrane overlap and spaced according to the roof'sv wind uplift requirements. Iti is designed to meet wind conditions on most building types. SPECIALTY SYSTEM ADHERED Rhinobond Plate Sikaplan Adhesive 3 RHINOBOND ROOF SYSTEM SIKAPLAN ADHERED SYSTEM This innovative attachment system is used with Sikaplan membranes to The! Sikaplan Adhered roof system is best for low sloped applications over increase contractor productivity: and enhance roof wind uplift resistance. nonnailable: substrates such as precast or prestressed concrete, cementious It uses electromagnetic induction weldingt to eliminate fastener wood fiber or gypsum. Iti is also effective over nailable substrates such as penetrations through the membrane. Specially coated membrane plates concrete, steel and wood decks. When used inc combination with Sikaplan are fastened to the roof assembly and later fused to the underside of the Single-Step Membrane Adhesive, it can be more cost effective to install membrane using the RhinoBond tool, which is lightweight, portable, and than an adhered TPO system. simple to use. The system achieves an FMI 1-90 rating int thei field while requiring 30 percent fewer fasteners per square than traditional systems. AHhchmept # L 260/360/560 Insulclad Thermal Entrances 7 FEBRUARY, 2023 EC 97911-282 ENTRANCE DETAILS Additional information and CAD details are available at www.kawneer.com TRIFAB VERSAGLAZE" 451T CENTER FRAMING SHOWN. 260 INSULCLAD SHOWN, 360 AND 560 INSULCLAD SIMILAR. OTHER FRAMING OPTIONS AVAILABLE. CONSULT YOUR KAWNEER REPRESENTATIVE. 7 7 3 3 3 1 3 ELEVATION IS NUMBER KEYED TO DETAILS. E € 8 de € 2 3 - 3/32" 1/8" 3/32" d (2.4) (3.2) (2.4) cu e 7 2* 2-1/8" 2-3/16" 2-1/8" 2-1/8" 2" (50.8) (54) (55.6) (54) (54) (50.8) / N 452041 o INSERT N a 5 Cu 8 0 doay 92 2 4 2" 5/8" (50.8) (15.9) o 6 a E kawneer.com ADMA070EN KAWNEER AUTHENTIC WOOD EXTERIOR WOOD DOORS JELDWEN. Atuchment # 5 TABLE OF CONTENTS Authentic Wood Construction Details AA % 1 % Page: 5 6 7 8 9 12 13 Model: 944 1515 2020 2130 5001 5001 Sidelite 5005 Sidelite Page: 14 15 16 17 19 20 21 Model: 5010 5015 5018 5066 5101 5101 Sidelite 5102 Sidelite Page: 22 23 24 25 26 27 28 Model: 5103 Sidelite 5104 5104 Sidelite 5106 5112 5201 5201 Sidelite March 2023 I Scale: NTS Product specifications may change without notice. Architectural Design Manual 12 Masonite HD 6 Panel Doors Steel Doors Exterior Front and Entry.. htps./resideptial.masonie-com/products/doorleaterion/masonite-hd-. AHachmunt# WHERE TO BUY CONTACT US 1-800-663-DOOR EN V MASONITE. Masonite HD 6 Panel Where to Buy Doors Masonite HD 6 Panel Doors 1 of4 8/1/23,5:19 PM # - Atlachment SITELINE WOOD WINDOWS SITELINE DOUBLE HUNG DOORS JELDWEN VERTICAL SECTION DOUBLE HUNG OPERATOR 513/16" 1 1/4" 4 9/16" 21/8" 3/4" 11/16" - 4 13/4" 9/16" 9/16" /16" 7/8" a 5/8" 5/8" 13/4" & 27/8" 111/16" 4! 9/16" 1 5/16"- 57/8" Architectural Detail Manual SCALE: 6" = 1'-0" April: 2015 JELD-WEN reser s the right to changes specifications without notice. Page 6-18 SITELINE WOOD WINDOWS SITELINE DOUBLE HUNG DOORS JELDWEN HORIZONTAL SECTION DOUBLE HUNG OPERATOR ROUGH OPENING 3/8" FRAME: SIZE 3/8" 5/8" SASH SIZE 1 5/8" GLASS SIZE 17 7/16" DAYLIGHT 1 7/16" OPENING 5/8" 5/8" das sD 4 9/16" 4 9/16" 513/16" 513/16" 9/16" 9/16" 1 1/4" DAYLIGHT 11/4" OPENING 1" GLASS SIZE 215/16" SASH SIZE 215/16" OUTSIDE CASING SIZE Architectural Detail Manual SCALE: 6" = 1'-0" April 2015 JELD-WEN reserves the right to change specifications without notice. Page 6-19 VELUX FCM 2222. Fixed Curb Mount Skylight - SolarTown.com htpalholmown.omhceusi2imx2i2infnedaiyligh-em:. AHachmutH8 SODARTOWN Cart Search the store HOME / SKYLIGHTS / FIXED: SKYLIGHTS / VELUX 22-1/2 IN. X: 22-1/2 IN. FIXED SKYLIGHT FCM 2222 VELUX 22-1/2 i D VELUX VELUX 22-1/2 in. X 22-1/2 in. Fixed Skylight FCM 2222 * * * * 182 Reviews 3 Questions 13 Answers SKU: FCM2222 SHIPPING: Free Shipping (Arrives in 3-5 Business Days) BULK DISCOUNT RATES We're offline Leave a message 1 of 12 7/22/23, 8:44 AM Vestil White PVC Corner Guard Round PVC-48R-WH - The Home... ps/www.homedgpoa.coiwAeCCComerGumi.Ro. AHachmentg $2512 Pay $0.12 after $25 OFF your total qualifying purchase upon opening a new card. 0 Apply for a Home Depot Consumer Card Pickup at New Freedom Delivering to 17349 Ship to Store Delivery Aug 9 - Aug 10 Wednesday, Aug 9 31 available 31 available FREE FREE 1 + Add to Cart or Buy now with 8/1/23, 8:55 Al 2of 5 NSE AHchmuutib 1 MASONITE. INTERIOR DOOR COLLECTIONS DOORS THAT DO MORE. NEW DESIGN & SIZE OPTIONS AN MEL 0S E - Safe NS Sound. THE NEW STANDARD el SOLID CORE 3 DOORS he way they eei more substantial and block ou nd no fle tv vely. For minimal cost, sond core jou on re ate ran natic mp vera o a UR SOUN o uc PA N PAN NE EL PANEL PANEL ng ny 4A lt'st time fora a better door experience. Make solid core doors the STANDARD. masonite.com t s - - - - Wood Floors Plus > Solid Oak > Westchester Plank Gunstock 3 1/4 X... ps/w.wpdllomolascmlaidéhnsadondalidatiwesches. - 2 Home Solid] Hardwood Atachnert# Solid Oak Westchester Plank Gunstock 3 1/4 x 3/4: 22 sflctn fShare Tweet OPin Westchester Plank Gunstock 3 1/4 X 3/4 22 sf/ctn Part Number: A16S846C $4.29 persf $94.38, per box Qty: ORDER: SAMPLE 22.00 sf 1 box ADD TO CART 2134s sf available The Westchester line is both beautiful and economical. Fach plank features micro bevel edges and micro bevel ends for a smooth, clean look. The tones of this collection are crisp and fresh, ensuring that your floors maintain their stellar character for the long run. Weight 62 Ibs SKU A16S846C technical Showroom Location 30A08 Sample Location 0276 Color Gunstock Construction Solid Surface Texture Smooth Manufacturer Bruce Country of Origin 1 of3 8/1/23,7:50 AM Wood Floors Plus > Solid Oak > Westchester Plank Gunstock 3 1/4 X... htips/www.woodfioodioompluscomisolid-hardwodlsolid-oakvesiches. USA Species Oak Manufacturer ID CB721 Thickness 3/4 inch Width 3 1/4 inch Length Random Length up to 701 Inches Janka Hardness 1290 Edge Detail Micro Edge Coverage per Unit 22 sf/ctn Units per case/pallet 32 Sheen Semi Gloss Shade Variation Medium Warranty 25 Year Residential Installation Type Nail or Staple Installation Level On or Above Ground Level Photosensitivity Low Customers who bought this product also bought ADD TO CART =0 -Sorry, we only have 2543 of that item available C01C076S : Carpet Daredevil Color Granite] Peaks 190 30516 sf available $0.79, persf $9.48, per If ADD TO CART 0 -Sorry, we only have 67 of that item available CARPADFOR7 16: : Carpenter) Forest Plus 7/1681 Ib. CaretPad30sgadral 67r roll available $69.00, perr roll 2of3 3 8/1/23,7:50 AM #14 AHachmunt LWM444PRF 11/16'x3-114" # 15 Atuchmnt Northland Outdoor Wall Sconce LUMENS By Kichler Call Us (877) 445-4486 Northland Outdoor Wall Sconce By Kichler Product Options Finish: Black, Size: Large Details Shadel has white inner finish Dimensions Large Option Backplate: Diameter 8" Large Option Fixture: Width 14", Height 16.75", Depth 24", Weight 3Lbs Lighting Large Lamp Type Halogen Notes: Total Lumens 1600.0 # of Bulbs 1 (Not Included) Prepared Prepared for: Project: Bulb Type 80W PAR38 E26 by: Room: Placement: Volts 120 Approval: Color Temp 3050 (Soft White) Average 1,500 Lifespan (Hours) CRI 100 Equivalent Yes Halogen, CFL or LED Bulb Can Be Used Additional Details Product URL: htps/www.lumens.commortnlandourdoor-wal-sconc bpcherACHbsle27atm Rating: ETL Listed Wet ITEM#: KCH687627 Property ofo'Connel! & Associates Not to be distributed to anyone othert than intended. recipient Alli information contained. herein is the intellectual property ofo'Comnelle Associates, LLC and may not be copied, disseminated, or used, in any. form w/o the express written consent ofo'Connell & Associates, LLC- O Copyright 2003 Property Address: The Johnson Building 527 Poplar Street Cambridge, MD 21613 Description of Rehabilitation EXTERIOR WORK See Sheet A100/Site Plan See Sheet A301/Front/Rear Proposed Elevations See Sheet A302/Alley Side (North) Proposed Elevation Exterior Paint Basis of Design: Sherwin Williams Exterior Paint (colors and finish as noted) 1. Sign Text - Black (Semi-Gloss) 2. Sign Background - Creamy SW 7012 (Flat/Matte) 2. Existing Cornice and Trim - Creamy SW 7012 (Semi-Gloss) 3. Rear Wall, Brick = Neutral Ground SW7568 (Flat/Matte) 4. Rear Addition, CMU = Urban Bronze SW 7048 (Flat/Matte) 5. New Siding-Hardie Plank Smooth Finish Horizontal Lap Siding Arctic White 6. New Siding-James Hardie Smooth Finish Fiber Cement Panel Siding = Cobble Stone 7. New Stucco - Library Pewter SW 0038 (Flat/Matte) 8. Windows / Trim - Snowbound SW 7004 (Semi-Gloss) 9. Exterior Doors = Snowbound SW 7004 (Semi-Gloss) 10. New Entry Canopy - Urbane Bronze SW 7048 (Semi-gloss) Item Number 1 Architectural feature: Walls/New Addition/All Facades Approximate date of feature: Describe the existing feature and its condition: The Johnson Building is a principal commercial block in the heart of Cambridge 's business district. This building is significant as one ofthe surviving late 19th century commercial structures in downtown Cambridge. The building has suffered the damage ofseveralfires. The two-story, eight- bay stretcher bond pressed, closely set, brick façade, with narrow butter joints, rises to a parapet with a long sloping roof to the asymmetrical rear wall and is distinguished by the survival offaint stenciling across the top of Client Initial indicating acceptance of information contained herein Property ofo'Comnell & Associates Not to be distributed to anyone othert than intended. recipient Alli information contained. herein is the intellectual property ofo'Comnelle Associates, LLC and may not be copied, disseminated, or usedi in any. form w/o the express written consent ofo'Connell & Associates, LLC- 0 Copyright 2003 the front wall. Interspersed on separate white brick panels are the name, "The Johnson Building. 1 The panel with the construction date of 1898 is located on the subdivided southernmost section ofthe building, separately owned, and not in the scope ofwork for this project. The Johnson Building label stems from the fact that the property was owned by Joseph H. Johnson and his descendants from 1903 to 1920. The commercial block depicted on the 1901 Sanborn insurance map housed a furniture store, hardware and paint store, and a confectioner. Currently there are two separate modern storefront designs, from prior renovations, with different non-historic finishes on the first floor with a unified elevation across the second story. The building has suffered the damage ofseveralfires which is evident on the northernmost section ofthe second floor. This building is significant as one ofthe surviving late 19th century commercial structures in downtown Cambridge. Afull-service restaurant with bar occupies the largest section, which is six bays across, with a metal frame storefront that is composed oflarge display windows to each side ofa double entrance. Existing front canopy structure with fabric sign extends the full width ofthis section of the storefront. The northernmost section is two bays across with a slight extension ofthe non-historic brick storefront. The north side unpainted masonry surfaces are laid in five-course common bond. The easternmost north side masonry wall is covered with ivy tendrils. The building extends to the rear to an asymmetrical, uneven, east elevation dpaintedfve-couse common bond brickwork. The masonry wall on the east side ofthe northernmost section is covered with vinyl siding. There is a I-story non-historic, reduced width, painted CMU east extension located at the rear oft the building. The exterior construction ofthe building consists ofmulti-wythe load bearing brick masonry walls with mortar joints. The existing conditions of the exterior walls include dirt and efflorescence requiring appropriate masonry cleaning. There are localized areas ofdeteriorated, loose and missing mortar joints between brick units that require repair. Bricks have been repointed on the front exterior wall with existing repointing mortar does not match the color ofthe historic mortar. There are structural issues in the existing brick walls on the south side and the north side of the building, above the second floor ceiling in the loft areas. Client Initial indicating acceptance of information contained herein Property ofo'Connel! & Associates Not to be distributed to anyone othert than intended. recipient Alli information contained. herein is the intellectual property ofo'Connell& Associates, LLC and may not be copied, disseminated, or usedi in any. form w/o the express written consent ofo'Connell & Associates, LLC- O Copyright 2003 There are several large cracks along the brick walls that will need to be repaired. Ground water is penetrating the foundation ofthe building. There is no existing drainage system. Photo(s)#: Describe work and impact on existing feature: Gently pull and remove the ivy away from the northside masonry wall in order not to damage the brick as it is coming away from the wall. Retain, preserve and repaint the fading brick wall sign based on the historic "ghost sign.' 2 Remove vinyl siding and expose historic east side masonry wall. The painted rear (east) masonry wall and the CMU addition will be repainted over the existing painted finish (existing paint is not vapor permeable SO the new paint will not be vapor permeable). Do not paint unpainted brick surfaces, no coatings will be applied to the brick. The cleaning ofthe exterior masonry walls will be accomplished using the gentlest means possible without damaging the surface ofthe masonry. The work will be accomplished in accordance with the guidance provided in Preservation Brief 1, Assessing Cleaning and Water-Repellent Treatment for Historic Masonry Buildings. The exposed masonry will be cleaned using the gentlest means possible, per Standard #7, which states: "Chemical or physical treatments such as sandblasting, that cause damage to the historic materials shall not be used. The surface cleaning of structures, if appropriate, shall be undertaken using the gentlest means possible. Gentle cleaning methods will include hand-sanding, hand-scraping and a water- based solution with a mild detergent. Cleaning will be done through the gentlest means possible, utilizing a "low-pressure spray" of water to remove observed excess dirt, carbon staining and efflorescence. Repoint only those portions of all masonry walls that require repair. Where there is evidence of deterioration/missing mortar, holes and/or cracks the mortar joints will be repointed. The deteriorated mortar will be removed by hand-raking the joints to preserve the integrity ofthe walls. Repoint existing masonry joints with soft lime-based mortar to match the original Client Initial indicating acceptance of information contained herein Property ofo'Comnell & Associates Not to be distributed to anyone othert than intended. recipient Alli information contained. herein is the intellectual property ofo'Comnelle Associates, LLC and may not be copied, disseminated, or used, in any form w/o the express written consent ofo'Connell & Associates, LLC- O Copyright 2003 construction. The repointing mortar will match the color, texture, composition (e.g., ratio oflime, cement, sand, and any additives), strength, joint width and joint profile from the original construction. Portland cement will not be applied to the building. No masonry coatings. The work will be accomplished in accordance with the guidance provided in Preservation Brief2, Repointing Mortar Joints in Historic Masonry Buildings. Repointing mortar for the front (west) wall will match the existing repointing mortar, the prevailing color, for consistency and uniformity. Retain existing west side storefront systems, including doors, window wall system and canopy. Repair brick walls in loft areas, as needed, replace cracked bricks and fill gaps with mortar. A structural engineer will review the current structural conditions, determine the nature ofthe cracking, ift there is ongoing settlement, and make recommendations for remediation. Ifi further repairs, other than repointing, are required an amendment with the proposed scope of work will be submitted prior to undertaking this work. The ground water issue in the rear ofbuilding is a foundation problem that will need to be addressed by cutting out concrete and repairing with a new drainage system. A structural engineer will provide recommendations for any additional work that is required to prevent water from penetrating the building. See Sheet A100/Site Plan-Footprint of proposed 2-story 2,585 SF addition. Building is +/- 34' at parapet. Addition is +/- 24'. Existing historic building is shown as hatched. See Sheets A201, A202, A301 & A302-Construct new 2-story rear addition with side apartment entrance and new egress staircase per the plans. New rear addition will not alter the appearance and form ofthe historic structure and will preserve historic material and the building's historic character. The addition is simple and unobtrusive in design, smaller than the historic building, attached to a secondary elevation and will not be visible from the public right ofway. The construction materials ofthe new addition (Attachment #1), Hardie Plank Smooth Finish Horizontal Lap Siding and James Hardie Fine Sand Fiber Cement Panel Siding (Attachment #2), with 3" smooth finish fiber cement trim boards, will be differentiated from the historic building SO that the new work is compatible with the historic Client Initial indicating acceptance of information contained herein Property ofo'Comnell & Associates Not to be distributed to anyone othert than intended. recipient Alli information contained. herein is the intellectual property ofo'Comnelle Associates, LLC and may not be copied, disseminated, or used, in any form w/o the express written consent ofo'Connell & Associates, LLC- O Copyright 2003 masonry building. In addition, the new construction will be inset 3'-4" from the east side masonry wall. Historic exterior masonry walls will be retained within the addition. The work will be accomplished in accordance with the guidance provided in Preservation Brief 14, New Exterior Additions to Historic Buildings: Preservation Concerns. See Attachment #3-Sikaplan Adhered Roof system (white PVC)-Slope roofs on new addition are compatible with the roof slope on the historic building. No soffit/overhang. The new addition will have new pre-finished aluminum half-round gutters, roof scuppers and tull-round downspouts as per the elevation drawings. See Attachment #4-Kawneer 560 Insulclad Thermal Entrance-New storefront entry system for apartment units will have a full-lite glazed door, sidelight and transom window with a metal and wood entry canopy (2/A302/Canopy Detail). All glazing is clear. All wood and aluminum members will have a painted finish, no bare or polished aluminum. See Sheets A201/Proposed First Floor Plan & A202/Proposed Second Floor Plan/Note 5-The new addition will preserve significant historic material. Existing historic exterior masonry walls will remain exposed within the new addition. Detailed drawings for the new addition, based on approval ofthe submitted schematic drawing, will be submitted on an amendment form to SHPO and NPS prior to construction. Item Number 2 Architectural feature: Doorways/Doors Approximate date of feature: Describe the existing feature and its condition See Sheet A101/Existing First Floor Plan All flush steel exterior doors are non-historic and were added after the historic period of significance. A doorway was added from the first floor restaurant to access the exterior courtyard space. Client Initial indicating acceptance of information contained herein Property ofo'Connel! & Associates Not to be distributed to anyone othert than intended. recipient Alli information contained. herein is the intellectual property ofo'Comnelle Associates, LLC and may not be copied, disseminated, or usedi in any. form w/o the express written consent ofo'Connell & Associates, LLC- 0 Copyright 2003 A doorway was added on the rear (east) elevation to access the building from the parking lot. Photo(s)#: Describe work and impact on existing feature: Retain and paint the existing rear and side flush metal doors. Doors will have new hardware. Retain, repair and repaint the existing trim/door surround or replace in kind to match the plain style ofthe existing. See Sheets AIOl/Existing/Demo, A201/Proposed First Floor Plan & 2/A301/Rear Building Elevation-Remove masonry infill for new rear (east) egress doorway for apartments units in area. No historic masonry or existing brick lintel will be impacted. See Attachment #5-Jeld Wen # 5066-New door will be a painted 6-panel solid wood door. See Sheet A302/Side Blevation-New side doorway on addition to provide egress/access to the restaurant space. See Attachment #6-New exterior egress door on the addition will be a Masonite HD 6-panel steel door. Item Number 3 Architectural feature: Window Frames/Sash Approximate date of feature: Describe the existing feature and its condition: There is an existing historic two-over-two wood window on the second floor north side wall. Sashes are in good condition. Two panes of glass are missing. The exterior opening is infilled with plywood. All other windows are non-historic replacement windows. The second story front (west) elevation is defined by a regular series of8 window openings with rusticated stone sills and lintels. The sash division varies from nine-over-nine divisions in the northern two-bays to single pane sash with small perimeter panes in the other openings. The window materials are a mix of wood and vinyl replacement windows. The non- historic wood windows are in poor condition. Center window openings on the east side (rear) painted masonry wall window have masonry infill. Client Initial indicating acceptance of information contained herein